Search results for: 'dc power extension cable'

The PD Power Expansion board from 52Pi is a multi-feature power management solution for Raspberry Pi 5. The board offers a range of power input options,...

12V DC Switchmode Plugpack Supplied with a fixed center positive 2.1mm DC jack.

DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm center pole diameter.

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3...

DIY? How about D-I-Wire! This barrel jack plug is great for adding a common power connector to the end of your wires. The jack is compatible with 5.5mm barrel jacks...

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew...

Outdoor enthusiasts rejoice! Adafruit now have standard 5.5/2.1mm DC power cable sets in a waterproof variety. These cable sets are ideal for projects that must weather...

18V DC, 2.8 Amp switch mode plug pack supplied with a fixed positive to tip 2.1mm DC jack (2.1ID x 5.5OD x 10L). Compact design with high current...

That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies

Type-C extension cable specially selected for Unihiker, suitable for compact project production...

This is a standard PCB-mountable barrel-type jack for DC power adapters with 2.1 mm center holes.

This handy little guy is a standard microUSB cable with an inline switch which allows you to toggle the device ON or OFF without the need to unplug. Simply wonderful!

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give...

This connector adapts a 5.5 × 2.1 mm DC barrel plug to a pair of screw terminals. The terminals are labeled positive and negative, with the positive terminal connected to the center contact.

Unlock the secrets of nature with code, engineering, and the Kitronik Smart Greenhouse Kit for BBC micro:bit!

With the cable, LattePanda can be powered by a common 12V DC power supply or a 12V battery pack easily...

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB B Round Panel Mount Extension Cable...

Once in a while we find products that have center negative DC power jacks and they really make us mad because who keeps around both positive and negative...

Here's a handy power cable for the RGB LED Matrix Panels We carry.

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it...

For big projects, with big power needs, an AT or ATX power supply is a handy place to grab 5V or 12VDC. Only problem is that these supplies have connectors that...

These panels come to us from Voltaic Systems, makers of fine solar-powered bags and packs. These are waterproof, scratch-resistant, and UV resistant, and...

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to...

This 24-inch (600-mm), twisted cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

If you need to add a panel-mount connection for USB Micro B, but don't have the time or ability to cut a custom oval or square hole, this Round Panel Mount Extension...

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give...

Power your Pi with a wide range of (DC) input voltages from 3 to 16V!

The ATX to DC5.5*2.5 Male Power Cable is designed for LattePanda Sigma. It features equipped with a push button switch for easy power control...

Want to use your new Official Raspberry Pi 7" Touchscreen Display but need to keep your GPIO pins free? This handy little cable is just what you need! We...