Search results for: '7 inch'
Raspberry Pi Touch Display 2 (7" Portrait)
Brand: Raspberry Pi
Display your projects proudly with the Raspberry Pi Touch Display 2, featuring a vibrant 7" portrait-native screen with 720x1280 resolution and true multi-touch capability. Experience seamless interaction with 5-finger touch support and an impressive 85-degree viewing angle, perfect for DIY projects and custom interfaces.
$105.69 AUD, inc GST
ESP32-S3 7inch Capacitive Touch Display Development Board
Brand: Waveshare
ESP32-S3 7inch Capacitive Touch Display Development Board, ESP32 With Display, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor, Up to 240MHz...
$72.30 AUD, inc GST
Waveshare 7inch LCD IPS 1024×600
Brand: Waveshare
This 7inch IPS display is a perfect option for a portable Raspberry Pi setup with HDMI input, USB power, capacitive touch and 1024x600 resolution.
$74.60 AUD, inc GST
Waveshare 7inch LCD IPS 1024x600 (with case)
Brand: Waveshare
A 7inch display that comes with a case is a sturdy interface for a portable microcomputer setup
$97.95 AUD, inc GST
Waveshare 7inch IPS Raw Display with Adapter board (1024 × 600 Pixels)
Brand: Waveshare
7inch IPS/QLED Integrated Display, 1024 × 600, Thin and Light Design...
$65.60 AUD, inc GST
52Pi 7 Inch HDMI IPS Display (1024x600px)
A 7-inch IPS display, 1024x600 at 60Hz, great colour and high contrast; USB-C power and full-size HDMI.
$94.95 AUD, inc GST
7" Touch Display Kit For Raspberry Pi Zero, (1024×600 pixel touch screen)
Brand: Waveshare
7" Touch Display Kit for Raspberry Pi Zero, with IPS display Expansion Board, 1024×600, 5-point Capacitive Touch...
$92.45 AUD, inc GST
Waveshare 7inch QLED Raw Display with Adapter board (1024 × 600 Pixels)
Brand: Waveshare
7inch IPS/QLED Integrated Display, 1024 × 600, Thin and Light Design...
$99.10 AUD, inc GST
7inch DSI Capacitive Touch Display for Raspberry Pi
Brand: Waveshare
7inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface
$80.75 AUD, inc GST
7 inch 1024x600 Capacitive TouchScreen
Brand: Seeed Studio
A 7-inch HDMI monitor with driver-free capacitive touch, delivering bright 1024×600 visuals, ten-point multi-touch and dual USB host ports for expansion.
$219.95 AUD, inc GST
7 inch DVI Display Module for Raspberry Pi Pico
Brand: Waveshare
7/10.1 inch DVI Display Module for Raspberry Pi Pico, IPS panel, 1024×600 Pixel, DVI interface Communication...
$50.95 AUD, inc GST
7inch Capacitive Touch IPS Display for Raspberry Pi
Brand: Waveshare
Vibrant, accurate colours, DSI Interface, 1024×600
$98.80 AUD, inc GST
7 inches Touch Display(eDP) for LattePanda Alpha&Delta
Brand: DFRobot
Excellent Visual Effect This display adopts IPS screen technology, support 178-degree visual Angle, 1024 x 600 high resolution and high color saturation, achieve...
$134.95 AUD, inc GST
7-inch 1024x600 IPS Display for LattePanda
Brand: LattePanda
Add exciting new dimensions to your project with this large full-color display. All you need to do is power your LattePanda board and you have a visual user interface for your project - no extra power cables required! The border of the display is insulated with black tape so that even without and enclosure there is no possibility of a short-circuit. The picture below shows LattePanda directly powering the 7" display.
$74.40 AUD, inc GST
7" eDP IPS Touch Narrow Bezel Display for LattePanda IOTA / LattePanda 3 Delta
Brand: DFRobot
Experience seamless control with the official 7" eDP touch display for LattePanda IOTA & 3 Delta. Features a 1024x600 IPS panel, perfect for portable HMI....
$129.95 AUD, inc GST
7'' 1024x600 Touch Display (eDP) for LattePanda Sigma
Brand: DFRobot
Enhance LattePanda Sigma experience with the 7-inch 1024x600 Touch Display. Featuring IPS screen technology, high resolution, and vivid colors, this...
$134.95 AUD, inc GST
HDMI 7 800x480 Display Backpack - With Touchscreen
Brand: Adafruit
Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the...
$174.95 AUD, inc GST
SmartiPi Touch 2 - Stand For Raspberry Pi 7" Touchscreen Display
The SmartiPi Touch 2 is a case for the Official Raspberry Pi Display, Raspberry Pi and Raspberry Pi camera. New features include, an integrated camera mount, three interchangeable face plate options, and cooling fan.
$56.70 AUD, inc GST
Adjustable Bent-Wire Stand - up to 7 Tablets and Small Screens
Brand: Adafruit
This handy bent-wire display stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electronics & TFT holding...
$17.70 AUD, inc GST
30PIN 15CM FPC Cable for LattePanda Alpha & Delta eDP Display
Brand: DFRobot
The cable was specially designed for LattePanda Alpha & Delta 7inch eDP display. With high flexibility and ultra-thin design, it perfectly transmit the video signal.
$4.95 AUD, inc GST
7-inch Capacitive Touch Panel Overlay for LattePanda Display
Brand: LattePanda
This is a capacitive touch panel overlay for the LattePanda board, overlay the panel on your LattePanda 7-inch display, power the board, and you will have a high-quality user interface for project.
$31.45 AUD, inc GST
RF Explorer - Raspberry Pi Touch screen Holder
Brand: Seeed Studio
This useful Acrylic custom designed holder is the perfect for the Raspberry Pi 7" official Touchscreen. It helps keep the Touchscreen in a right angle, and takes very little desk area.
$28.95 AUD, inc GST
SmartiPi Touch Pro 2 - compatible with the Raspberry Pi Official Display
Brand: Core Electronics
The SmartiPi Touch Pro 2 has all the same features as the SmartiPi Touch Pro but also has micro SD card access on the side of the case. The SmartiPi Touch...
$94.20 AUD, inc GST
Similar matches
7 Segment Display (2-Wire, 0.5")
Brand: Core Electronics
Perfect for when you need to display the time or some simple sensor read-outs, all with two pins!
$1.95 AUD, inc GST
Inky Impression – 7.3" (2025 Edition)
Brand: Pimoroni
Beautiful, colour E Ink / ePaper displays for use with Raspberry Pi computers. At a nice size of 7.3” (800 x 480 pixels).
$164.95 AUD, inc GST
Rigol DHO-814 Oscilloscope
Brand: Rigol
Analyse signals on a 12-bit digital oscilloscope featuring 1,000,000 wfms/s in UltraAcquire mode. Detect anomalies with low-noise floor and 25 Mpt memory.
$1068.95 AUD, inc GST
Rigol DS-1054Z Oscilloscope
Brand: Rigol
The Rigol DS1054Z, now stocked in Australia, represents a remarkable breakthrough in price and performance in general purpose 4 channel digital storage oscilloscopes.
$769.95 AUD, inc GST
Rigol DHO-924S Oscilloscope
Brand: Rigol
Capture 12-bit high-res signals with 50 Mpts memory for precise waveform analysis. Perfect for mixed-signal debugging in embedded designs.
$1605.95 AUD, inc GST
Short 7mm Pi HAT standoffs
Brand: Pimoroni
These short standoffs will let you securely attach compatible HATs to a Pi Zero or Zero W, to make a nice, slim sandwich…
$6.30 AUD, inc GST
ESD-Safe PCB Cleaning Brush
Brand: Adafruit
Neat-freaks! Put down that toothbrush and pick up this nice ESD-safe cleaning brush! If you want to have a nice clean board (or maybe you're doing some repair) you...
$6.75 AUD, inc GST
Raspberry Pi 5 Dashboard Bundle
Brand: Raspberry Pi
NOW WITH TOUCH DISPLAY 2 - Does your project need a sleek touch interface? This Raspberry Pi 5 bundle is the perfect solution for information-rich, dashboards and control panels.
$439.91 AUD, inc GST
7.3inch 6-Color E-Paper Display, E-Ink Display HAT
Brand: Waveshare
7.3inch 6-Color E-Paper Display, E-Ink Display, Low Power Consumption, 800×480 pixels, SPI Communication, Optional for e-Paper Driver HAT...
$139.95 AUD, inc GST
1013D 100MHz Portable Tablet Oscilloscope
Brand: FNIRSI
Diagnose circuits away from the bench. This portable dual-channel oscilloscope features a 100MHz bandwidth, a responsive 7-inch capacitive touch display, and a 6000mAh battery for extended field testing.
$229.95 AUD, inc GST
UCTRONICS 19” 1U Rack Mount for Raspberry Pi with SSD Mounting Brackets
Brand: UCTRONICS
Raspberry Pi 1U Rack Mount is designed to house 4 x RPis and 4 x 2.5” SSDs. Mounted in the 19" standard rack.
$109.95 AUD, inc GST
ProtoBoard 7cm * 10cm - 2.54mm (Seeed Studio)
Brand: Seeed Studio
Thanks to Garrett's review, we have now a newer type, flawless quality: no odor finely drilled tough including power pad. Clean hole Downhand welding
$6.95 AUD, inc GST
Machine Screw: M3, 7mm Length, Phillips (25-pack)
Brand: Pololu
This M3, pan-head screw is 7 mm long. It is made from steel, is zinc-plated, and comes in packs of 25...
$5.80 AUD, inc GST
0.100" (2.54 mm) Female Header: 1x7-Pin, Straight
Brand: Pololu
This connector is a single-row, 7-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.
$1.80 AUD, inc GST
Inky Impression 4" (7 colour ePaper/eInk HAT)
Brand: Pimoroni
A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper (ePaper/eInk/EPD) display for Raspberry Pi...
$119.95 AUD, inc GST
Rigol DHO-802 Oscilloscope
Brand: Rigol
DHO-802 Oscilloscopes 70MHz, 2CH, 1.25GS/s, 12 BIT...
$754.95 AUD, inc GST
7-Segment Display - 20mm (Red)
Brand: Sparkfun
For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you’d have trouble finding an enclosure for them.
$5.55 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.