Search results for: '6 pin jst cable'

40 results

6-Pin Female-Female JST SH-Style Cable 16cm

Brand: Pololu
This 16 cm (6.3") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.05 AUD, inc GST

JST PH-Style Cable, 6-Pin, Female-Female, 10cm

Brand: Pololu
This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...
$5.40 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 25cm

Brand: Pololu
This 25 cm (10") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.85 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 10cm

Brand: Pololu
This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$5.60 AUD, inc GST

USB Type C Screw Panel Mount to 6 pin JST PH Cable

Brand: Adafruit
This panel mount cable is great for making USB Type C connections with a panel-mount setup. On the small panel-mount side you get a USB C connector, the...
$6.35 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 6-Pin, 75cm

Brand: Pololu
This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$11.35 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 40cm

Brand: Pololu
This 40 cm (16") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$7.95 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$3.10 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 12cm

Brand: Pololu
This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$3.50 AUD, inc GST

6-pin JST SM Plug + Receptacle Cable Set

Brand: Adafruit
These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...
$4.10 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 30cm

Brand: Pololu
This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$4.95 AUD, inc GST

STEMMA Cable - 150mm 4 Pin JST-PH Cable–Female/Female

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small...
$1.70 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 75cm

Brand: Pololu
This 75 cm (30") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$8.75 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 63cm

Brand: Pololu
This 63 cm (25") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$10.05 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (3-Pack, Untested)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST

JST GH 1.25mm Pitch 6 Pin Cable - 100mm long

Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...
$1.95 AUD, inc GST

XRP Motor to Breadboard Jumper Cable - 6in. (6-pin JST-SH)

Brand: SparkFun
This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other...
$3.55 AUD, inc GST

2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.35 AUD, inc GST

Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST

Breadboard to JST-ZHR Cable - 6-pin x 1.5mm Pitch

Brand: SparkFun
This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature...
$4.75 AUD, inc GST

1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have...
$2.45 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry (3-Pack, Untested)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...
$1.95 AUD, inc GST

6V Air Valve with 2-pin JST PH Connector - FA0520E

Brand: Adafruit
Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container.
$6.65 AUD, inc GST

Jumper Wire - 0.1", 2-pin, 6"

Brand: SparkFun
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$3.55 AUD, inc GST

Jumper Wire - 0.1", 6-pin, 6"

Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$3.70 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (Individually Packaged)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$2.55 AUD, inc GST

2-Pin Female JST XH-Style Cable (15cm)

Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.30 AUD, inc GST

TinyFX 2-Pin Connection Cables (5cm, 6-Pack)

Brand: Pimoroni
Connect your TinyFX expansion boards and mono LED strips with these reliable 2-pin JST-SUR cables, available in 5cm and 15cm lengths for flexible installation options.
$8.35 AUD, inc GST

JST SH Jumper 6 Wire Assembly - 8"

Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.
$3.80 AUD, inc GST

TinyFX 2-Pin Connection Cables (15cm, 6-Pack)

Brand: Pimoroni
Connect TinyFX devices easily with these 2-pin JST-SUR cables, perfect for linking expansion boards and mono LED strips in 15cm lengths - includes 6 black cables per pack.
$8.40 AUD, inc GST

Jumper Wire - 0.1", 5-pin, 6"

Brand: SparkFun
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$4.25 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry (Individually Packaged)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$2.50 AUD, inc GST

Jumper Wire - 0.1", 4-pin, 6"

Brand: SparkFun
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$3.75 AUD, inc GST

JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST

JST SH Jumper 6 Wire - 1 Foot

Brand: SparkFun
This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module may be a distance away from the controller board. Cable has two 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
$6.80 AUD, inc GST

Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch

Brand: SparkFun
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the...
$4.80 AUD, inc GST

JST SH Horizontal 6-Pin Connector - SMD

Brand: SparkFun
Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below.
$1.60 AUD, inc GST

3x AA Battery Holder with On/Off Switch and 2-Pin JST

Brand: Adafruit
Here's another addition to the growing family of AA battery holders. Behold! A holder for three (3) AA batteries! It's got a 6" long genuine JST-PH 2-pin cable connector, an On/Off switch, and, oh yes, it's in classy Adafruit black.
$7.95 AUD, inc GST

Breakout for JST SH-Style Connector, 2-Pin Male Side-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$2.90 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.