Search results for: '4 pin jst'

50 results

STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long

Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...
$1.95 AUD, inc GST

4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long

Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...
$1.95 AUD, inc GST

JST SH Jumper 4 Wire Assembly - 8"

Brand: Sparkfun
This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.
$3.80 AUD, inc GST

JST-SH 4-Pin SMD Connector (Side Entry) - PiicoDev Compatible Connector

Add a small 4-pin connector to your SMD PCB designs with this  JST-SH 4-pin compatible connector...

$0.23 AUD, inc GST

Qwiic JST Connector - SMD 4-pin

Brand: Sparkfun
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible...
$1.05 AUD, inc GST

JST SH-Style Cable, 4-Pin, Single-Ended Female, 75cm

Brand: Pololu
This 4-conductor, 75 cm (30") cable has 28 AWG wires and a 4-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...
$5.55 AUD, inc GST

JST SH-Style Cable, 4-Pin, Female-Female, 63cm

Brand: Pololu
This 4-conductor, 63 cm (25") cable has 28 AWG wires and 4-pin female JST SH-type connectors on both ends...
$6.75 AUD, inc GST

JST-PH Jumper 4 Wire Assembly

Brand: Sparkfun
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
$3.50 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm

Brand: Pololu
This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$3.75 AUD, inc GST

2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.10 AUD, inc GST

JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm

Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...
$3.20 AUD, inc GST

JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm

Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$3.30 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long

Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST

JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long

Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...
$1.90 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long

Brand: Adafruit
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$3.25 AUD, inc GST

JST SH 4-pin Vertical Connector (10-pack) - Qwiic Compatible

Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.05 AUD, inc GST

4-pin JST SM Plug + Receptacle Cable Set

Brand: Adafruit
These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector...
$3.60 AUD, inc GST

JST PH 4-pin Vertical Connector (10-pack) - STEMMA

Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...
$6.65 AUD, inc GST

JST PH 4-Pin Socket to Color Coded Cable - 200mm

Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...

$2.10 AUD, inc GST

5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long

Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT 4-pin JST SH on one end, and Arduino MKR...
$2.85 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long

Brand: Adafruit
This 4-wire cable is a little over 300mm / 11.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$2.80 AUD, inc GST

JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic

Brand: Adafruit
This cable will make it super easy to use Adafruit's plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector...
$6.15 AUD, inc GST

Qwiic JST Connector - SMD 4-Pin (Vertical)

Brand: Sparkfun
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically, great for tight spaces. This connector is used...
$1.40 AUD, inc GST

JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible

Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.95 AUD, inc GST

JST-SH 4-pin Cable with Micro SMT Test Hooks - STEMMA QT / Qwiic

Brand: Adafruit
This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.
$5.70 AUD, inc GST

JST PH 4-pin Plug to Color Coded Alligator Clips Cable

Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. Adafruit are carrying these to match up with any of our...
$5.30 AUD, inc GST

JST PH-Style Cable, 4-Pin, Female-Female, 63cm

Brand: Pololu
This 4-conductor, 63 cm (25") cable has 24 AWG wires and 4-pin female JST PH-type connectors (2mm pitch) on both ends...
$7.10 AUD, inc GST

JST connector Kit (2.54mm)

Brand: DFRobot
This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).
$11.60 AUD, inc GST

JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit

Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$23.80 AUD, inc GST

JST connector Kit (2.0mm)

Brand: DFRobot
This kit includes PHR-2,PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each)and crimp contact (100 units).
$11.15 AUD, inc GST

Breakout for JST SH-Style Connector, 4-Pin Male Top-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$3.15 AUD, inc GST

Breakout for JST SH-Style Connector, 4-Pin Male Side-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$3.20 AUD, inc GST

Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.80 AUD, inc GST

LED Strip Pigtail Connector (4-pin)

Brand: Sparkfun
These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection...
$4.05 AUD, inc GST
Similar matches

JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long

Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST

2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.90 AUD, inc GST

JST-PH 2-Pin SMD Connector (Side Entry)

Add a power connector to your SMD PCB designs with this  JST-PH 2-pin compatible connector...

$0.26 AUD, inc GST

JST SH 1mm Pitch 3 Pin to Socket Headers Cable - 100mm long

Brand: Adafruit
If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...
$2.90 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$3.10 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.