Search results for: '16-channel multiplexer'

28 results

Analog/Digital MUX Breakout

Brand: Sparkfun
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins!
$10.95 AUD, inc GST

16 Channel Multiplexer

Brand: Sparkfun
Texas Instruments CD74HC4067 16-Channel multiplexer. What can you do with it? How about taking an analog to digital reading from 16 devices with only 1 ADC channel and 4 control pins. That’s right, 16 for the price of 5! 24-Pin SSOP package. Works great with our 28-Pin SSOP to DIP adapters.
$1.75 AUD, inc GST

Mux Shield II

Brand: Sparkfun
Sometimes you’ve got way too many inputs, or outputs… or both. How are you going to get them all connected to your Arduino? The Mux Shield, that’s how. The Mux Shield II from Mayhew Labs is an upgrade on their previous Mux Shield which makes it possible to route up to 48 analog and digital inputs or digital outputs to and from your Arduino board.
$55.75 AUD, inc GST

Bidirectional USB 3 Multiplexer

Brand: The Pi Hut
The bidirectional USB 3 Multiplexer ('mux') allows either a single USB device (or multiple devices when using a USB hub) to be switched between two USB...
$33.80 AUD, inc GST

HDMI Matrix - 4:2

Brand: Core Electronics
Explore the HDMI Matrix 4:2; a versatile switch offering 4 HDMI inputs and 2 outputs for a streamlined multimedia setup. Ideal for hobbyists and tech enthusiasts, this compact solution supports seamless device management without the need for additional software.
$79.60 AUD, inc GST

Adafruit ADG729 Dual 1-to-4 Analog Matrix Switch

Brand: Adafruit
Analog switches are a solid state alternative to relays, when you want a smaller, lower-power technology that won't wear out mechanically. And, as the...
$18.95 AUD, inc GST
Similar matches

ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier

Brand: Adafruit
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second...
$27.60 AUD, inc GST

TCA9548A I2C Multiplexer

Brand: Adafruit
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address...
$13.85 AUD, inc GST

Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685

Brand: Adafruit
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise...
$26.80 AUD, inc GST

USB Logic Analyzer - 24MHz/8-Channel

Brand: Sparkfun
This 8-channel USB Logic Analyzer with support for sampling rates of up to 24MHz provides a good while economic option making it a great and easy tool...
$49.30 AUD, inc GST

Adafruit PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9548A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or more of them to...
$12.40 AUD, inc GST

MCP23017 IO Expansion Board, Expands 16 I/O Pins

Brand: Waveshare
The MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.
$10.90 AUD, inc GST

MCP3008 - 8-Channel 10-Bit ADC With SPI Interface

Brand: Adafruit
Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses...
$7.90 AUD, inc GST

Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9546A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, and you want to wire up two or three or four of them to...
$7.55 AUD, inc GST

ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier

Brand: Adafruit
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second...
$17.45 AUD, inc GST

Gravity: MCP23017 IIC 16 Digital IO Expansion Module

Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module...
$10.10 AUD, inc GST

SparkFun Multiplexer Breakout - 8 Channel (74HC4051)

Brand: Sparkfun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eight LEDs to monitoring eight potentiometers.
$5.95 AUD, inc GST

MCP23017 - i2c 16 input/output port expander

Brand: Adafruit
Add another 16 pins to your microcontroller using a MCP23017 port expander. The MCP23017 uses two i2c pins (these can be shared with other i2c devices), and in exchange...
$13.60 AUD, inc GST

8 Channel Solid State Relay Module (DC Control, AC Loads)

Brand: Core Electronics

This breakout module gives you access to a 8 channel solid state relay that can be switched with 3-5VDC 

$26.75 AUD, inc GST

Industrial 8-Channel Relay Module for Raspberry Pi Pico

Brand: Waveshare
Industrial 8-Channel Relay Module For Raspberry Pi Pico, Power Supply Isolation, Photocoupler Isolation...
$33.35 AUD, inc GST

Gravity: Digital 1-to-8 I2C Multiplexer

Brand: DFRobot
On the same I2C port, DFRobot Gravity: I2C Multiplexer solves the address conflict and enables the normal communication with multiple same-address I2C devices. You...
$11.65 AUD, inc GST

Adafruit PCA9546 4-Channel I2C Multiplexer - TCA9546A Compatible

Brand: Adafruit
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a...
$7.90 AUD, inc GST

Pololu 4-Channel RC Servo Multiplexer (Partial Kit)

Brand: Pololu
This compact four-channel multiplexer of hobby radio control pulses allows for easy switching between two independent signal sources. An auxiliary channel selects whether the output comes from the master or the slave source. The activation threshold and direction are configurable. Surface-mount components are pre-assembled on the PCB, but through-hole components are not installed and require soldering.
$25.10 AUD, inc GST

SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)

Brand: Sparkfun
Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same bus! The Qwiic Mux Breakout...
$24.95 AUD, inc GST

8-Channel Isolated Analog Data Acquisition Module

Brand: DFRobot
This is an 8-channel single-end 12-bit analog data acquisition module with an accuracy of up to ±1‰, supporting 0-5V, 1-5V, 0-2.5V, 0-20mA, 4-20mA ranges. It can...
$134.95 AUD, inc GST

SparkFun Qwiic 12 Bit ADC - 4 Channel (ADS1015)

Brand: Sparkfun
A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled...
$31.70 AUD, inc GST

SparkFun 16 Output I/O Expander Breakout - SX1509

Brand: Sparkfun
Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/output pins. But the SX1509 can do so much more than just simple digital pin control. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. And, with a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix.
$13.35 AUD, inc GST

4 Channel Boosted Servo Extension via CAT6

Brand: goBilda
This Boosted Servo Extension lets you control up to four servos over a CAT6 cable. This approach allows you to control your servos from a.....
$49.25 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.