xTool MetalFab Laser Welding Gloves
Goatskin leather and split cowhide keep sparks, spatter and radiant heat off your hands while you weld, cut and clean metal.
In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow*
Disclaimer:
For next-day delivery, the shipping address must
be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed
before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost
pickup timings and order verifications. eParcel Express is typically a 1-day service within the
AusPost next-day network, though it is sometimes 2+ days.
Goatskin grain leather across the palm, split cowhide up the cuff, and Kevlar fire-resistant stitching holding it together - hand protection built for handheld laser welding.
Handheld welding puts your hands closer to the work than any enclosed machine does. Sparks and spatter come off the forming weld, and the part stays hot long after the trigger is released. Thin workshop gloves transmit that heat straight through; heavy welding gloves protect, but cost you the finger control needed to hold a nozzle steady along a seam.
The split-leather construction targets both problems at once. Goatskin keeps the palm protected and durable so you can still feel the work, while the longer cowhide cuff covers the wrist and forearm where spatter tends to hit. A soft fleece lining makes longer sessions tolerable, and reinforcement patches across the palm and fingers take the abrasion of handling freshly cut edges or spatter.
Features
- Goatskin grain leather palm stays flexible and breathable, so you keep the dexterity to guide a welding nozzle rather than fighting stiff leather
- Split cowhide cuff extends protection past the wrist to the forearm, covering the area spatter most often reaches
- Kevlar fire-resistant stitching holds the seams where ordinary thread would scorch and fail first
- Reinforced patches on both palm and fingers absorb the abrasion of handling hot, sharp-edged offcuts
- Soft fleece lining makes extended wear comfortable instead of something you take off between welds
- Withstands approximately 200°C, enough for brief contact with hot stock and fresh welds
Specifications
| Property | Specification |
|---|---|
| Palm material | Goatskin grain leather |
| Body material | Split cowhide |
| Stitching | Kevlar |
| Lining | Soft fleece |
| Reinforcement | Palm and finger patches |
| Maximum temperature | Approximately 200°C |
| Length | 350mm (14in) |
| Width | 170mm |
| Size | One size (XL) - suitable for all users |
| Colour | Black and white |
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
40 Aruma Place
Cardiff
NSW, 2285
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Guides
xTool P3 First Time Cutting Quick Start Guide
Setting Up Your xTool P3 | From Unboxing to First Cut
xTool P3 Overview | A New Standard for Making?
The Maker Revolution
Projects
The Rats Nest VCC Desktop Power Supply
Remote-Controlled Mars Rover
FlipperMate: Hands-Free Pinball
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments