Search results for: 'led acrylic'
Black LED Diffusion Acrylic Panel - 10.2 x 5.1 - 0.1 / 2.6mm thick
Brand: Adafruit
nice whoppin' rectangular slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of special cast acrylic that makes it perfect for glowy projects, especially matrices or NeoPixels.
$18.35 AUD, inc GST
White LED Backlight Module - Large 45mm x 86mm
Brand: Adafruit
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below...
$7.05 AUD, inc GST
Black LED Diffusion Acrylic Panel 12 x 12 - 0.1 / 2.6mm thick
Brand: Adafruit
A nice whoppin' slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of special cast acrylic that makes it perfect for glowy projects, especially matricies or NeoPixels.
$45.25 AUD, inc GST
RGB Full Color Backlight Display - 84mm x 45mm
Brand: Adafruit
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light...
$6.95 AUD, inc GST
ELECFREAKS micro:bit Ring:bit V2 Car Kit (Without micro:bit Board)
Brand: Elecfreaks
A ring:bit micro car can easily be programmed to run autonomously, with remote control, and create rainbow beacons of light.
$42.90 AUD, inc GST
GlowBit Pico Orb Acrylic Pack - Snowflakes
Brand: GlowBit
Is summer too hot? Dream of a white Christmas with these illuminating snowflakes! Spares or alternate front-plates for the GlowBit Pico Orb
$5.15 AUD, inc GST
Round Semi-Circle Backlight LED - 50mm Diameter
Brand: Adafruit
These pretty circles of light are plastic diffused backlights, probably originally used in LCD gauge displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually, and they're really cool! Each LED is encased in a 2.2mm thick semi-circle of acrylic. The acrylic is a special type that is very good at diffusing light, so even though there are only two white LEDs, it provides near-uniform lighting. The other flat side of the diffuse has a reflector on it so you only get light from the top (otherwise the backlight would lose 1/2 the brightness unnecessarily)
$5.90 AUD, inc GST
Kitronik Tricolour LED Board
Brand: Kitronik
The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has...
$6.75 AUD, inc GST
White LED Backlight Module - Medium 23mm x 75mm
Brand: Adafruit
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below.
$5.30 AUD, inc GST
Infinity Mirror Kit V2 by Core Electronics
Brand: Core Electronics
Kits are where it's at. With our Desktop Infinity Mirror Kit V2 you'll get to make something wonderful with your hands, all in the span of an afternoon. But if you want, you can dive deeper, follow our tutorials, level-up your coding and make this thing truly your own.
$149.95 AUD, inc GST
RGB Full Color Backlight Display - 23mm x 75mm
Brand: Adafruit
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light...
$5.15 AUD, inc GST
Mini LED Arcade Button - 24mm Translucent Blue
Brand: Adafruit
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right...
$5.45 AUD, inc GST
HIFI Digital Bluetooth Amplifier-100W*2
Brand: DFRobot
This HIFI Bluetooth Power Amplifier board features 100W output power, volume adjustment knob, AUX+Bluetooth 5.0 input, dual channel output, and DC5-27V ...
$34.40 AUD, inc GST
ELECFREAKS micro:bit Joystick:bit V2 Kit
Brand: Elecfreaks
ELECFREAKS offers quality miniature and micro joystick. It includes bright blue and red making look beautiful. Nice Feel, pocket size, and suitable for...
$26.70 AUD, inc GST
GlowBit Mini Orb Acrylic Kit - Clock and Blank
Brand: GlowBit
Display the time, or DIY your own glowing creations! Spares or alternate front-plates for the GlowBit Mini Orb
$21.95 AUD, inc GST
Ctrl C/V Shortcut Keyboard For Makers
Brand: Waveshare
Ctrl C/V Shortcut Keyboard For Programmers, 3-Key Development Board, Adopts RP2040 Microcontroller Chip, Programmable Key Function, Dual Type-C Ports,...
$14.05 AUD, inc GST
Pimoroni Pan-Tilt HAT for Raspberry Pi - without pan-tilt module
Brand: Pimoroni
The Pan-Tilt HAT from Pimoroni lets you mount and control a pan-tilt module right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently...
$34.70 AUD, inc GST
White LED Backlight Module - Small 12mm x 40mm
Brand: Adafruit
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below...
$4.15 AUD, inc GST
Adafruit Matrix Portal Starter Kit - ADABOX 016 Essentials
Brand: Adafruit
If you missed out on AdaBox016, it's not too late for you to pick up the parts necessary to build many of the projects! It doesn't come with tissue paper or the nifty extras, but it does have all the electronic goodies you need.
$189.95 AUD, inc GST
Cluster HAT Case v3.0
Brand: The Pi Hut
Manufactured in the UK, this case brings together the Raspberry Pi 4, Cluster HAT & 4 x Raspberry Pi Zero's into one simple, neat package. Important...
$29.95 AUD, inc GST
Pimoroni Picade Pan-Tilt Hat (Full Kit)
Brand: Pimoroni
Pimironi's Pan-Tilt HAT lets you mount and control one of their pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs.
$74.95 AUD, inc GST
PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports M.2 NVMe SSDs
Brand: Waveshare
PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, With Transparent acrylic...
$15.40 AUD, inc GST
GlowBit Pico Orb Bauble Kit
Brand: GlowBit
Merry Christmas! Add this ready-to-go, flashy-festive ornament to your Christmas decoration library. A perfect addition to any Makers tree!
$64.00 AUD, inc GST $45.13
High Power Bluetooth Power Amplifier Board
Brand: DFRobot
Starting to build your dream Speakers with this Bluetooth Power Amplifier board! This cost-effective high power Bluetooth amplifier board features 100W output power...
$26.05 AUD, inc GST
RGB Full Color Backlight Display - 12mm x 40mm
Brand: Adafruit
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light...
$3.80 AUD, inc GST
micro:Maqueen V2 Plus - an Advanced STEM Education Robot for micro:bit
Brand: DFRobot
micro: Maqueen Plus is an advanced version of micro:Maqueen Lite (4.0), which is more powerful and intelligent. Optimized with better power management and larger...
$96.20 AUD, inc GST
Daylight IQ Magnifying LED Lamp
Brand: Core Electronics
Ergonomically designed magnifying lamp. The head moves freely and holds any position and is fitted with a lightweight acrylic lens offering 3 dioptres (1.75X) magnification and anti-scratch coating. 12 dioptres swing arm lens is included.
$594.95 AUD, inc GST
Acrylic Case for LattePanda
Brand: LattePanda
This acrylic case is a nice and solid enclosure for LattePanda dev board. A case can protect the board while letting you see the status LEDs directly and providing accesss to things like USB, HDMI, SD card, GPIO cables. Assembling this case is quite simple and intuitive .We also provides a quick guide along with the product on how to assemble this nice case.
$12.55 AUD, inc GST
RFID/NFC Nail Stickers - 5 Pack with White LEDs
Brand: Adafruit
You're at New York's hottest cyberpunk club is Near Field Commune(ication), and it's got everything, Adabot & the Circuit Playground, Collin's wondrous, mind-blowing...
$14.55 AUD, inc GST
micro:bit Wireless Gamepad
Brand: DFRobot
Micro:bit gamepad is an expansion gamepad based on micro:bit. You only need to plug in the micro:bit, it will turn into a wireless remote controller a wireless game...
$33.95 AUD, inc GST
Daylight Omega 7 Magnifier
Brand: Core Electronics
The Omega 7 is a modern, ergonomically designed magnifying lamp. It has a large 17.5 cm, 3 dioptres (1.75X), lightweight acrylic lens and high power LEDs with 4 brightness level for clear viewing
$414.95 AUD, inc GST
DIY Snow Globe Kit - 108mm Diameter
Brand: Adafruit
Not merely a snow globe, but a show globe! This custom container is durable, clear and round, with a large flat screw-on top and a press-fit rubber stopper. The...
$17.30 AUD, inc GST
Maqueen Plus V3 - STEM Educational micro:bit Robot with Matrix Laser Ranging (18650 Battery)
Brand: DFRobot
Maqueen Plus V3, advanced educational robot with precision navigation by matrix laser ranging. For STEM EDU, robotics competitions of primary and...
$144.95 AUD, inc GST
GlowBit Pico Orb Snowflake Kit
Brand: GlowBit
Merry Christmas! Add this ready-to-go, sparkly-snowy decoration to your Christmas decoration library. A perfect addition to any Makers tree!
$64.00 AUD, inc GST $45.13
Gravity: Digital Relay Module (Arduino and Raspberry Pi Compatible)
Brand: DFRobot
Introducing the Gravity Digital Relay Module – the latest addition to DFRobot’s Gravity series! This module is a little different to the other relays in our store...
$6.90 AUD, inc GST
Mini Tower Kit for Raspberry Pi 5
Brand: The Pi Hut
This Mini Tower Kit from 52Pi is the ultimate home for your Raspberry Pi 5, including an LED ICE tower cooler, 0.96" OLED, strong ABS core and full port...
$109.95 AUD, inc GST
xTool K9 Crystal Ball Inner Engraving Kit
Brand: xTool
Etch a 3D scene suspended inside solid glass - everything needed for UV inner engraving, from the submersion rig to the finished lit display.
$207.89 AUD, inc GST
Multi Function Expansion Board for UNIHIKER K10 and micro:bit (Power & Motion)
Brand: DFRobot
Power up UNIHIKER or micro:bit projects with this all-in-one expansion board. Drive 4 DC motors & 6 servos, and add portable power with its 18650 battery...
$27.85 AUD, inc GST
Rack Tower for Raspberry Pi 4B/ 3B & Jetson Nano
Brand: DFRobot
Rack Tower stands for a new concept for the 4-layer acrylic case for the cluster. This 4-layer acrylic oversized fan enclosure is a new product designed to provide...
$72.80 AUD, inc GST
Pimoroni Keybow MINI (3-key) Macro Pad Kit (Clicky)
Brand: Pimoroni
Keybow MINI is a 3-key version of Pimoroni's wildly-popular Keybow mini mechanical keyboard. Like its older sibling, Keybow MINI has RGB-illuminated, hot-swap, mechanical switches, and clear key caps. It's the perfect way to add a tiny macro pad to your desk, or to use as a little osu! controller.
$55.40 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.