empowering creative people

  1. DRV8825 Stepper Motor Driver Carrier, High Current POLOLU-2133 Pololu Australia

    DRV8825 Stepper Motor Driver Carrier, High Current

    SKU: POLOLU-2133
    This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of Pololu's A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in. Learn More
    $12.04 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $12.04 AUD

  2. Pololu Jrk 12v12 USB Motor Controller with Feedback POLOLU-1393 Pololu Australia

    Pololu Jrk 12v12 USB Motor Controller with Feedback

    SKU: POLOLU-1393
    The powerful jrk 12v12 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used as an open-loop speed control or for closed-loop speed or position control. The continuous output current is approximately 12 A (30 A max) and the operating range of 6–16 V (with transient protection up to 40 V). Learn More
    $125.59 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $125.59 AUD

  3. Pololu Dual VNH5019 Motor Driver Shield for Arduino POLOLU-2507 Pololu Australia

    Pololu Dual VNH5019 Motor Driver Shield for Arduino

    SKU: POLOLU-2507
    Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino. Learn More
    $62.77 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $62.77 AUD

  4. A4988 Stepper Motor Driver Carrier, Black Edition POLOLU-2128 Pololu Australia

    A4988 Stepper Motor Driver Carrier, Black Edition

    SKU: POLOLU-2128
    Our Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor driver carrier. It features a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20% more current than Pololu's two-layer (green) version. Like Pololu's original carrier, the Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. This board ships with 0.1″ male header pins included but not soldered in. Learn More
    $10.13 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $10.13 AUD

  5. DRV8838 Single Brushed DC Motor Driver Carrier POLOLU-2990 Pololu Australia

    DRV8838 Single Brushed DC Motor Driver Carrier

    SKU: POLOLU-2990
    This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. The carrier board has the form factor of a 10-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards. Learn More
    $4.72 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $4.72 AUD

  6. Mini Maestro 12-Channel USB Servo Controller (Assembled) POLOLU-1352 Pololu Australia

    Mini Maestro 12-Channel USB Servo Controller (Assembled)

    SKU: POLOLU-1352
    The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed. Learn More
    $37.64 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $37.64 AUD

  7. 2A Motor Shield For Arduino DRI0009 DFRobot Australia

    2A Motor Shield For Arduino

    SKU: DRI0009
    This DFRobot Arduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanoveand Arduino Mega. Learn More
    $24.79 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $24.79 AUD

  8. A4988 Stepper Motor Driver Carrier POLOLU-1182 Pololu Australia

    A4988 Stepper Motor Driver Carrier

    SKU: POLOLU-1182
    This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in. Learn More
    $7.99 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $7.99 AUD

  9. DRV8833 Dual Motor Driver Carrier POLOLU-2130 Pololu Australia

    DRV8833 Dual Motor Driver Carrier

    SKU: POLOLU-2130
    This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage motors. Learn More
    $6.76 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 6th of Apr

    $6.76 AUD

  10. Mini Maestro 24-Channel USB Servo Controller (Assembled) POLOLU-1356 Pololu Australia

    Mini Maestro 24-Channel USB Servo Controller (Assembled)

    SKU: POLOLU-1356
    The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed. Learn More
    $62.77 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 30th of Mar

    $62.77 AUD

Set Ascending Direction

1-10 of 87

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5