Every project deserves a place to feel safe, and we've got enclosures to house all kinds of projects with weather resistant and heavy duty options available.
This practical cover protects electronics that need to be outside (like temperature and humidity sensors) from sun and rain, whilst maintaining airflow....
Store your project safe and sound in this nice weatherproof box with a clear top. they picked up this box because Adafruit like the machinable ABS plastic body and tough...
Whether you're raiding tombs or traversing nuclear fallout wastelands, this is the most heavy-duty enclosure for your project! Weatherproof? Check. Tough polycarbonate...
Store your project safe and sound in this nice weatherproof box with a clear top. they picked up this box because Adafruit like the machinable ABS plastic body and tough...
Put on a sturdy and beautiful enclosure for your electronic project! This project box is made from high-quality ABS material, and the surface of the enclosure is...
The Room Sensor Enclosure (Size 2) is designed and manufactured for wall mounting applications such as air detectors, social distance monitoring, smart...
These beefy, bright red plastic enclosures will give your widget the protection (and attention) it deserves. You’ve probably seen these used to enclose radio equipment or antenna baluns as they can be secured to a pole using U-bolts (not included). At about 3mm thick, this 74x158x90mm enclosure has plenty of space for gizmos, gadgets, widgets and doohickeys. The mounting flanges extend 19mm from either edge with two 50mm-spaced 7mm diameter holes.
These are our small, beefy aluminum enclosures, which have been built tough enough to withstand a truck. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it’s aluminum, it’s easy to cut and drill so that you can add LCD screens, buttons and cable connections. If you want to “pretty up” your project, hit this with some fine-grit sand paper and buff it or just spray paint it!
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are Adafruit's favorite accessory for any electronic kit or device...
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They can also be used as feet for enclosures. These are self-adhesive and 16.5mm in diameter and about 10mm tall. They taper to roughly 12mm at the top. They come in a set of 4.
Ever since Altoids discontinued the Gum version, its been hard to get tins. So Adafruit went and got a whole mess of them custom made! These tins are exactly the same...
Flanged versions of our popular jiffy boxes allowing wall or chassis mounting. UB3 size 130Lx67Wx43Hmm, grey. Manufactured from sturdy ABS plastic with moulded PCB mounts. PCBs can be installed vertically, or horizontally. *Picture for illustration purposes - box is grey in colour.
Flanged versions of our popular jiffy boxes allowing wall or chassis mounting. UB5 size 82Lx54Wx30Hmm, grey. Manufactured from sturdy ABS plastic with moulded PCB mounts. PCBs can be installed vertically, or horizontally. *Picture for illustration purposes - box is grey in colour.
Flanged versions of our popular jiffy boxes allowing wall or chassis mounting. UB3 size 130Lx67Wx43Hmm, black. Manufactured from sturdy ABS plastic with moulded PCB mounts. PCBs can be installed vertically, or horizontally.
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. Dimensions 130 x 67 x 42
Flanged versions of our popular jiffy boxes allowing wall or chassis mounting. UB5 size 82Lx54Wx30Hmm, black. Manufactured from sturdy ABS plastic with moulded PCB mounts. PCBs can be installed vertically, or horizontally.
Please continue if you would like to leave feedback for any of these topics:
Website features/issues
Content errors/improvements
Missing products/categories
Product assignments to categories
Search results relevance
For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.
Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.