M5StickC PLUS SE ESP32-PICO Mini IoT Development Kit

Write your code, flash it and carry the finished gadget in your pocket. This ESP32 development kit puts the controller, display, battery and enclosure into one 48 x 24mm stick, so you don't need a breadboard or jumper wires.

The M5StickC PLUS SE has the same core hardware as the M5StickC PLUS. Unlike the M5StickC PLUS, which has an MPU6886 6-axis motion sensor, the SE has no built-in IMU. It suits projects such as a Wi-Fi remote, a status display or a compact smart-home control panel. Its translucent orange case makes it easy to tell apart.

Getting started is simple. Press the power button once to turn it on or reset it, and press and hold it for 6 seconds to turn it off. The USB-C port handles both charging and programming. Some computers need the FTDI VCP driver before they can upload code.

Features

• Display readings, menus and graphics clearly on the 1.14-inch, 135 x 240 colour TFT LCD.

• Connect to your network and the cloud through the ESP32-PICO-D4 with 2.4GHz Wi-Fi, 4MB flash and a 3D antenna.

• Run untethered projects from the built-in 120mAh lithium battery, managed by an AXP192 power management unit.

• Build your own infrared remote with the onboard IR transmitter.

• Capture sound and keep accurate time without extra modules, thanks to the SPM1423 microphone and BM8563 real-time clock.

• Give feedback without looking at the screen using the passive buzzer and red status LED.

• Control your project with physical inputs: two customisable buttons, plus a power/reset button.

• Add features without soldering by plugging M5Stack Units into the HY2.0-4P port, or Hats into the 8-pin 2.54mm Hat-Bus.

• Attach it to any magnetic surface with the magnets on the back.

• Program it in the environment you prefer: UiFlow1, UiFlow2, Arduino IDE, ESP-IDF or PlatformIO.

Specifications

Resources

• Product documentation (M5Stack)

• Schematic (PDF)

• Model dimensions (PDF)

What's Included

• 1x M5StickC PLUS SE