Formlabs Draft Resin V2 Cartridge - 1L

Draft Resin prints up to four times faster than Formlabs standard materials, making it ideal for initial prototypes and rapid iterations to help bring products to market faster. Parts printed with Draft Resin exhibit a smooth grey finish and high accuracy. Use 200-micron settings for fast print speeds, or use 100-micron settings for models with finer details.

From fast print initiation speeds to minimal support removal, wash, and cure times, Draft Resin has an optimized workflow to truly maximize efficiency.

This version of Draft Resin is a reformulation of a previous version. This current version offers an improved surface finish, a more professional appearance, and is easier to use.

Features

• Supports print resolutions: 100 and 50 microns (Form 2, Form 3, and Form 3B).
• Post-curing recommended.
• Print Speed: Print up to 4x faster than standard resins
• Part Quality: This reformulation reduced layer thickness by 33%, improving surface finish & accuracy
• Professional Appearance: A new grey finish offers professional-looking models
• Ease of Use: This reformulation reduced support touchpoints and Form Wash and Form Cure times

Post-Processing

Form Wash Settings

• Duration: 10 min
• Notes: Wash Draft Resin parts in isopropyl alcohol (IPA). Avoid washing for longer than the recommended time. When washed in IPA with a resin concentration of more than 5%, tackiness has been observed on part surface

Form Cure Settings

• Duration: 5 min
• Temperature: No heat or 60 °C
• Notes: Draft Resin has two post-cure settings. To simply remove tackiness, post-cure with no heat for 5 minutes. For better tensile strength, post-cure at 60 °C for five minutes.