FLIR Lepton 2.5 - Thermal Imaging Module

SKU: SEN-16465 Brand: Sparkfun

$459.95 AUD, inc GST

$418.14 AUD, exc GST

Available with a lead time
Expect dispatch between Jan 02 and Jan 06

Quantity Discounts:

3-5 $405.59 (exc GST)
5+ $397.23 (exc GST)

The FLIR Lepton® 2.5 - Thermal Imaging Module is a radiometric-capable long wave infrared (LWIR) camera solution that is smaller than a dime, fits inside a smartphone, and is less expensive than traditional IR cameras. With a focal plane array of 80x60 active pixels, this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The radiometric Lepton captures accurate, calibrated, and non-contact temperature data in every pixel.

Features

Effective Frame Rate: 8.6 Hz (commercial application exportable)
Input Clock: 25-MHz nominal, CMOS IO Voltage Levels
Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied)
Pixel Size: 17 µm
Radiometric Accuracy: High gain: Greater of +/- 5°C or 5% (typical) Low gain: Greater of +/- 10°C or 10% (typical)
Scene Dynamic Range: -10-140 °C (high gain); up to 450°C (low gain) typical
Spectral Range: Longwave infrared, 8 µm to 14 µm
Temperature Compensation: Automatic. Output image independent of camera temperature.
Thermal Sensitivity: <50 mK (0.050° C)
Video Data Interface: Video over SPI
Control Port: CCI (I2C-like), CMOS IO Voltage Levels
Package Dimensions - Socket Version (w x l x h): 11.8 x 12.7 x 7.2 mm
Mechanical Interface: 32–pin socket interface to standard Molex® socket
Non-Operating Temperature Range: -40 °C to +80 °C
Optimum Temperature Range: -10°C to +80°C
Shock: 1500 G @ 0.4 ms
Array format: 80 × 60, progressive scan
FOV - Diagonal: 63.5°
FOV - Horizontal: 50° (nominal)
Image Optimization: Factory configured and fully automated
Non-Uniformity Correction (NUC): Automatic with shutter
Sensor Technology: Uncooled VOx microbolometer
Solar protection: Integral
Input Supply Voltage: 2.8 V, 1.2 V, 2.5 V to 3.1 V IO
Power Dissipation: 150 mW (operating), 650 mW (during shutter event), 4 mW (standby)

Documents

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!