FEETECH High-Torque Servo FS5115M
Available with a lead time
Expect dispatch between May 13 and May 15
Quantity Discounts:
- 10+ $32.77 (exc GST)
The FS5115M is a standard-size analog servo from FEETECH that can deliver more than twice the torque of Pololu's standard-size servos with plastic gears thanks to its powerful motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo). The output shaft is supported by two ball bearings for reduced friction. The FS5115M works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 500 µs to 2500 µs, and it has a 12" (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible. You can find more information about this servo in its datasheet (133k pdf).
|
|
For more advanced robotics applications, please note that Pololu also carry a version of this servo that is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, which lets you monitor the actual position of the servo from your controller:
 |
FEETECH High-Torque Servo FS5115M-FB with Position Feedback. |
|---|
This servo is also compatible with Pololu's Mounting Bracket for Standard-Size Servos:
 |
The picture below shows the all-metal gear train that helps the servo deliver such high torque:
 |
Note that, as with most hobby servos, stalling or back-driving this servo can damage it. This servo can draw bursts of current in excess of 3 A at 6 V, so please make sure you have an appropriate power supply. For comparison, a typical standard-size servo might draw around an amp when straining.
Comparison to the Power HD 1501MG high-torque servo
This servo is a lower-cost alternative to the 1501MG from Power HD, which has nearly identical dimensions and similar performance. The two servos should be generally interchangeable for most applications. The picture below shows both the FS5115M and the 1501MG side by side:
 |
People often buy this product together with:
 | Micro Maestro 6-Channel USB Servo Controller (Assembled) |
Dimensions
| Size: | 40.8 × 20.1 × 38 mm |
|---|---|
| Weight: | 58 g |
General specifications
| Digital?: | N |
|---|---|
| Speed @ 6V: | 0.16 sec/60° |
| Stall torque @ 6V: | 15.5 kg·cm |
| Speed @ 4.8V: | 0.18 sec/60° |
| Stall torque @ 4.8V: | 14 kg·cm |
| Hardware included?: | Y |
| Lead length: | 12 in |
File downloads
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $6+ for Standard Post (typically 6+ business days, tracked)
- $10+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $11+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
DF15RSMG 360 Degree Motor (20kg)SKU: SER0035 Brand: DFRobotThis is a most powerful standard servo sized motor from DFRobot so far. The DF15 ...- DC-DC Adjustable Step-down Module 5A 75WSKU: CE07271 Brand: Core ElectronicsDC-DC Adjustable Step Down Module 5A 75W XL4015
- Tic T500 USB Multi-Interface Stepper Motor ControllerSKU: POLOLU-3135 Brand: PololuThe Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of ...
- FS5115M - Standard Servo (15kg/cm)SKU: CE09394 Brand: Feetech
Need a standard-size servo with a bit more power? The FS5115M is made for you ...
Videos
View AllGuides
Servos, Steppers or Solenoids? | Choosing an Actuator to Move Your Project
Getting Started with Servos | Examples with Raspberry Pi Pico
Setting up and Using the Adafruit 16-Channel Servo HAT for Raspberry Pi
Controlling Standard Servos with Raspberry Pi
Projects
Pico Baro V2
Micro:bit Random Selector
DIY Pi Buggy
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments