FEETECH High-Torque Digital Servo FT5313M

SKU: POLOLU-3428 Brand: Pololu

The FT5313M is a standard-size digital servo from FEETECH that is capable of delivering extra-high torque normally associated with more expensive or...

$90.25 AUD, inc GST

$82.05 AUD, exc GST

Available with a lead time
Expect dispatch between May 13 and May 15

Quantity Discounts:

6-12 $79.58 (exc GST)
12+ $77.95 (exc GST)

The FT5313M is a standard-size digital servo from FEETECH that can deliver over twice the torque of Pololu's standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the FT5121M, which has identical dimensions to the FT5313M). The output shaft is supported by two ball bearings for reduced friction.

The FT5313M works with standard RC servo pulses, providing a running angle of approximately 120° over a servo pulse range of 900 µs to 2100 µs. Many hobby servos can be operated beyond their standard ranges by using a wider pulse range, but please note that in Pololu's tests, Pololu were not able to expand the range of the FT5313M significantly beyond 120° (the servo did not respond to pulses below around 800 µs or above around 2100 µs, providing an approximate expanded range of 135°).

This servo has a 10" (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible. You can find more information about this servo in its datasheet (123k pdf).

The servo cable is terminated with a Futaba-compatible JR-style connector.

FEETECH High-Torque Digital Servo FT5313M with included hardware (actual hardware might vary).

This servo is also compatible with Pololu's Mounting Bracket for Standard-Size Servos:

The pictures below shows the all-metal gear train that helps the servo deliver such high torque:

Note that, as with most hobby servos, stalling or back-driving this servo can damage it. This servo can draw bursts of current in excess of 4 A at 6 V, so please make sure you have an appropriate power supply. For comparison, a typical standard-size servo might draw around an amp when straining.

People often buy this product together with:

Mounting Bracket for Standard-Size Servos

Dimensions

Size:	40.5 × 20.5 × 37.5 mm
Weight:	60 g

General specifications

Digital?:	Y
Speed @ 6V:	0.10 sec/60°
Stall torque @ 6V:	13.8 kg·cm
Speed @ 4.8V:	0.13 sec/60°
Stall torque @ 4.8V:	12.5 kg·cm
Hardware included?:	Y
Lead length:	10 in

File downloads

Datasheet for the FEETECH High-Torque Digital Servo FT5313M (123k pdf)

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review