FeatherS2 - ESP32-S2

SKU: CE08592 Brand: Unexpected Maker
The full-featured ESP32-S2 based development board in a Feather format from Unexpected Maker.
$36.32 AUD, inc GST
$33.02 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 25th of Nov

Quantity Discounts:

  • 10-25 $31.70 (exc GST)
  • 25+ $30.71 (exc GST)
- +

10 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The full-featured ESP32-S2 based development board in a Feather format from Unexpected Maker. The FeatherS2 is a power house, fully souped up with 16 MB of Flash memory (for firmware and file storage) and 8 MB of QSPI-based external PSRAM so you can have massive storage buffers.

 

2x LDO Voltage Regulators?

Yup! The first one is for the general operation of the board and the ESP32-S2, RAM and Flash.

The second LDO is for you to use to connect external 3V3 modules, sensors and peripherals, and it has programmable EN control tied to GPIO21 + it’s connected to the deep sleep capabilities of the S2, so if the S2 goes into deep sleep, the 2nd LDO is automatically shut down for you!

Ships with CircuitPython pre-installed!

The FeatherS2 ships with CircuitPython pre-installed as well as the UF2 bootloader, so you can easily update your FeatherS2 with the latest CircuitPython firmware, whenever you desire.

As newer versions of CircuitPython are released, you are able to update as you require from ciruitpython.org

There is also ESP-IDF and Arduino support if you prefer coding in C++.

 

Features & Specifications

  • 32-bit 240 MHz single-core processor

  • 16 MB SPI Flash

  • 8 MB extra PSRAM

  • 2.4 GHz Wi-Fi - 802.11b/g/n

  • 3D antenna

  • 2x 700 mA 3.3 V LDO regulator

  • Optimised power path for low-power battery usage

  • LiPo battery management

  • Power (red), Charge (orange) & IO13 (blue) LEDs

  • 21x GPIO

  • USB-C

  • APA102 RGB LED (CLK IO45, DATA IO40)

  • ALS-PT19 Ambient Light Sensor (IO14)

  • QWIIC/STEMMA connector

  • Feather format

Resources

Schematic Diagram

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

WiFi GlowBit Matrix Control with WLED and ESP32/ESP8266 Dev Boards – Make Pixel Art with No Code!

Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...
Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...

Understanding ESP32 Naming Conventions

Espressif is a constantly ground-breaking company that produces lots of really cool development mod...
Espressif is a constantly ground-breaking company that produces lots of really cool development mod...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Interactive Exercise Bike - Pedal Powered Visuals

This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...
This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...

Accurate IoT Clock With ESP8266

Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...

Spirit In A Box Halloween Trick

IntroductionThis project was born from the desire to craft a captivating and spine-tingling magic t...
IntroductionThis project was born from the desire to craft a captivating and spine-tingling magic t...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.