LattePanda IOTA Active Cooler (Aluminum Heatsink & Fan)

SKU: FIT1027 Brand: DFRobot
LattePanda IOTA active cooler is an ultra-thin, aluminum heatsink with a variable-speed fan, ensuring sustained high performance through efficient heat...
$21.30 AUD, inc GST
$19.36 AUD, exc GST

Available with a lead time
Expect dispatch between Nov 19 and Nov 24

- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This active cooler is an ultra-thin heatsink specifically designed for the LattePanda IOTA. Its adjustable-speed fan works together with the cooling fins to quickly dissipate heat generated by the processor, keeping the LattePanda board operating at an appropriate temperature to ensure optimal performance.

The main body is made of aluminum alloy with good thermal conductivity and comes with pre-applied thermal pads to ensure efficient heat transfer. Its surface is covered with a lightweight, high-temperature-resistant engineering plastic housing, giving it a restrained and attractive appearance.


Installation Steps:

1. Connect the fan's cable to the "FAN" connector on the back of the LattePanda board.

2. Apply an even layer of thermal paste to the processor.

3. Remove the protective film from the heatsink thermal pad, align the heatsink with the mounting holes on the back of the LattePanda board, and secure it using the screws and standoffs.

LattePanda IOTA and Active Cooler

Figure: Overview of LattePanda IOTA Active Cooler


Note:

  • 1.When installing or removing the cooler, the LattePanda IOTA must be powered off.
  • 2.The heatsink's air outlet should be installed facing the network port side.
  • Specification

  • Compatible Board: LattePanda IOTA
  • Operating Voltage: 5V
  • Operating Current: 0.22A
  • Fan Speed: up to 5300 RPM
  • Speed Control Method: PWM
  • Connector Type: MX1.25-4P (Flat Type)
  • Wire Length: 18±5mm(Exposed Length)
  • Dimensions: 87*69*10.45mm
  • Thermal Material: Aluminum Alloy
  • Housing Material: Temperature-resistant Engineering Plastic
  • Weight: 62g (Fan Only)
  • Documents

  • LattePanda official website
  • This product is listed in:

    Other Favourites>LattePanda>Cases

    Product Comments

    Exact shipping can be calculated on the view cart page (no login required).

    Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

    We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

    • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
    • $7+ for Standard Post (typically 6+ business days, tracked)
    • $11+ for Express Post (typically 2+ business days, tracked)
    • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

    Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

    Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

    International Orders - the following rates are for New Zealand and will vary for other countries:

    • $12+ for Pack and Track (3+ days, tracked)
    • $16+ for Express International (2-5 days, tracked)

    If you order lots of gear, the postage amount will increase based on the weight of your order.

    Our physical address (here's a PDF which includes other key business details):

    40 Aruma Place
    Cardiff
    NSW, 2285
    Australia

    Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

    Have a product question? We're here to help!

    Write Your Own Review

    Videos

    View All

    Guides

    The Maker Revolution

    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

    Raspberry Pi vs. LattePanda

    Ah, what a glorious time we live in, where we have to compare which micro-computer is going to best ...
    Ah, what a glorious time we live in, where we have to compare which micro-computer is going to best ...

    Arduino with LattePanda

    Ah, Arduino and LattePanda coming together at last. What could be better? Well along with the fact t...
    Ah, Arduino and LattePanda coming together at last. What could be better? Well along with the fact t...

    What is LattePanda?

    If you’ve been around electronics for a while you’ll have noticed the trend of single bo...
    If you’ve been around electronics for a while you’ll have noticed the trend of single bo...

    Projects

    PiicoDev Ecosystem In Fritzing

    This project began with a desire to make circuit building readily approachable for students new to ...
    This project began with a desire to make circuit building readily approachable for students new to ...

    10" Home Lab Testing Rack

    ⚠️ This project features mains power For a lot of project de...
    ⚠️ This project features mains power For a lot of project de...

    WLED Hourglass Theatre Prop - DMX Over Wi-Fi!

    I’ve been working in theatres for about 5 years. I’m a lighting technician for a few di...
    I’ve been working in theatres for about 5 years. I’m a lighting technician for a few di...
    Feedback

    Please continue if you would like to leave feedback for any of these topics:

    • Website features/issues
    • Content errors/improvements
    • Missing products/categories
    • Product assignments to categories
    • Search results relevance

    For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

    Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

    Makers love reviews as much as you do, please follow this link to review the products you have purchased.