Here's an easy solution for keeping your USB C devices free from dust and other unsavory particulates. These squishy Silicone USB C Dust Cover Inserts slip neatly into any computer or device with a USB C socket, from the Adafruit Feather STM32F405 Express to the Raspberry Pi 4.
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro...
This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add a USB to your project, but don’t want to put up with soldering tiny connectors, this is the board for you.
If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this USB C Jack to USB C Jack Round...
This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks...
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector...
With this USB breakout you will finally be able to incorporate a USB-C connector into your projects without needing to solder each tiny SMD pad. The SparkFun USB-C...
As technology changes and adapts, so does Adafruit, and speaking of adapting, this right angle adapter is USB C socket-to-plug. USB C is the latest industry-standard...
USB Type ‘B’ Female connector. The 4 connection pins have 2-2.5mm spacing allowing it to be inserted into development boards and perf boards with mild modification. You can either drill two 80mil holes for the support posts, or cut them off completely.
This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect...
Here's an easy solution for keeping your USB A devices free from dust and other unsavory particulates. This squishy Silicone USB A Dust Cover Inserts slip neatly into any computer or device with a standard USB A socket.
As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a USB A plug and a USB C socket so your older computer or laptop can...
This is a DC 5.5mm*2.1mm female to USB Type-C male power adapter plug that can power your mobile phones, tablets, Raspberry Pi, and Lattepanda devices. Note: This...
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 5-pack of some micro USB connectors! They're sturdy metal with 4 through-hole...
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of Adafruit's ribbon cables...
If you need to add a panel-mount connection for USB Micro B, but don't have the time or ability to cut a custom oval or square hole, this Round Panel Mount Extension...
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro...
If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB B Round Panel Mount Extension Cable...
It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to...
Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy...
If you need to add a panel-mount connection for Micro USB, but don't have the time or ability to cut a custom oval or square hole, this USB A Jack to Micro USB B...
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro...
USB Type ‘A’ Male connector. Ideal for making very small USB dongle devices that plug directly into a computer USB port or through a USB AtoA extension cable.
Please continue if you would like to leave feedback for any of these topics:
Website features/issues
Content errors/improvements
Missing products/categories
Product assignments to categories
Search results relevance
For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.
Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.