Search results for: 'voltage divider'

22 results

Analog Voltage Divider

Brand: DFRobot

The Voltage Divider can detect the supply voltage up to 25V. The DFRobot Voltage Divider module is based on the resistor divider principle.

$6.15 AUD, inc GST

Digital Potentiometer - 10K

Brand: Sparkfun
Potentiometers are incredibly useful, whether you’re controlling the volume on your stereo or the ‘mood lighting’ in your room. The problem with traditional potentiometers is the fact that your microcontroller doesn’t have an easy way to interface with them. Digital Potentiometers solve that problem by allowing you to control a voltage splitter with digital signals.
$2.95 AUD, inc GST

Slide Potentiometer with Knob - 75mm Long - 10KΩ

Brand: Adafruit
Slip slidin' away Slip slidin' away You know the nearer your resistance The more you're slip slidin' away If you're tired of the regular-old-twisty potentiometers...
$5.70 AUD, inc GST

Slide Potentiometer with Plastic Knob - 35mm Long - 10KΩ

Brand: Adafruit
Slip slidin' away Slip slidin' away You know the nearer your resistance The more you're slip slidin' away If you're tired of the regular-old-twisty potentiometers...
$3.70 AUD, inc GST

Slide Potentiometer with Plastic Knob - 45mm Long - 10KΩ

Brand: Adafruit
Slip slidin' away Slip slidin' away You know the nearer your resistance The more you're slip slidin' away If you're tired of the regular-old-twisty potentiometers...
$3.80 AUD, inc GST

Light Dependent Resistor (LDR)

Brand: Core Electronics

Easily measure light levels with a a photoresistor!

$0.35 AUD, inc GST

Resistor 10k Ohm 0.25 Watt PTH

Brand: Core Electronics
1/4 Watt ±1% Metal Film resistor commonly used for breadboarding and DIY electronics.
$0.10 AUD, inc GST

Hydrogen Gas Sensor - MQ-8

Brand: Sparkfun
This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm.
$13.30 AUD, inc GST

Force Sensitive Resistor (7mm, 5KG)

Brand: Core Electronics

Use the force...sensitive resistor! Add an easy-to-implement haptic analog sensor to your projects.

$8.20 AUD, inc GST

Potentiometers Kit (55pcs)

Brand: DFRobot
Variable resistors also named as potentiometer are electrical equipments having two terminal points in opposite direction.
$8.85 AUD, inc GST

Conductive Rubber Cord Stretch Sensor + extras!

Brand: Adafruit
Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of carbon-black impregnated...
$17.75 AUD, inc GST

Force-Sensing Linear Potentiometer: 4.0″×0.4″ Strip, Customizable Length

Brand: Pololu
Force-sensing linear potentiometers (FSLPs) from Interlink Electronics are passive components with resistances that depend on the magnitude and location of the force applied to the strip, making it easy to add novel touch interfaces or tactile sensors to your project. This 4″ (10 cm) strip can be cut to shorter, predefined lengths (1″, 2″, or 3″) to better suit your application. An external resistor (typically 4.7 kΩ to 10 kΩ) is required but not included.
$52.45 AUD, inc GST

Wind Vane

Brand: Sparkfun
The wind vane indicates the direction of the wind. Internally, on the vane are eight switches, each with a unique resistor. As the wind vane rotates, a...
$35.90 AUD, inc GST

LPG Gas Sensor - MQ-6

Brand: Sparkfun
This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.
$12.50 AUD, inc GST

75 Ohm 0.5 Watt Metal Film Resistors - Pack of 8

75R 1/2W - Same size as standard 1/4W carbon film.
$0.88 AUD, inc GST
Similar matches

QTR-1A Reflectance Sensor (2-Pack)

Brand: Pololu
The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following. The reflectance measurement is output as an analog voltage. This sensor is sold in packs of two units.
$9.50 AUD, inc GST

Adafruit Feather M0 Adalogger

Brand: Adafruit
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for portable...
$39.35 AUD, inc GST

Mini PIR Sensor with Time and Sensitivity Control - BS612

Brand: Adafruit
PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much...
$3.55 AUD, inc GST

QTR-8A Reflectance Sensor Array

Brand: Pololu
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate analog voltage output.
$21.80 AUD, inc GST

KR Sense Current and Voltage Sensor - 45A

Brand: Sparkfun
The KR Sense 45A is a small voltage and current sense breakout board. DC current is determined by measuring a voltage drop across a parallel shunt resistor, then...
$44.20 AUD, inc GST

Teensy 3.x Feather Adapter

Brand: Adafruit Feather
Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and even get built-in LiPoly...
$13.15 AUD, inc GST

Inductive Charging Set - 3.3V @ 500mA max

Brand: Adafruit
The squarish board with two chips on it is the transmitter (power with 9V). The longer board is the output and you can connect that to the part of your project that...
$18.35 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.