Search results for: 'usb connector breakout boards'

40 results

USB MicroB Plug Breakout Board

Brand: SparkFun
We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this. We broke out all 5 pins with a vertical microUSB connector for your prototyping needs.
$9.70 AUD, inc GST

USB 2.0 Type-C Connector Breakout Board (usb07b)

Brand: Pololu
This simple board breaks out the power, USB 2.0 data, configuration, and sideband pins of a USB Type-C connector to a 0.1" spacing that is compatible with ...
$6.65 AUD, inc GST

USB Mini-B Connector Breakout Board

Brand: Pololu
This simple board breaks out all five pins of a USB Mini-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.
$4.15 AUD, inc GST

Breakout Board for USB Mini-B

Brand: SparkFun
This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB Mini-B connector to your breadboard - here it is. Also good for an un-regulated, non-limited 5V supply up to 100mA.
$5.15 AUD, inc GST

USB Mini-B Breakout Board

Brand: Adafruit
Simple but effective - this breakout board has a USB Mini-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or...
$3.65 AUD, inc GST

USB 2.0 Type-C Connector Breakout Board (usb07a)

Brand: Pololu
This simple board breaks out the power, USB 2.0 data, configuration, and sideband pins of a USB Type-C connector to a 0.1" spacing that is compatible with...
$8.30 AUD, inc GST

Adafruit Reversible USB Type A Plug Connector Breakout

Brand: Adafruit
Coming soon! Sign up to be notified when these are in stockQuantum superposition is a physics concept that light and matter can be both particle and wave...
$4.70 AUD, inc GST

USB Type A Female Breakout

Brand: SparkFun

This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add a USB to your project, but don’t want to put up with soldering tiny connectors, this is the board for you.

$9.30 AUD, inc GST

Adafruit CH334F Mini 2-Port USB Hub Breakout

Brand: Adafruit

Sometimes, you've got something with a USB host, like an embedded Linux board, and you want...

$8.95 AUD, inc GST

SparkFun USB to Serial Breakout - FT232RL

Brand: SparkFun
This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip.
$38.80 AUD, inc GST

Adafruit USB C Breakout Board - Downstream Connection

Brand: Adafruit
Throw out all those Mini and Micro B USB cables you have in a plastic bin - the next generation of USB connectors is here with USB C! You will start to see these...
$5.40 AUD, inc GST

Adafruit Sunken USB Type C Breakout Board - Downstream Connection

Brand: Adafruit
When you want a svelte USB C build, a 'sunken' type connector that straddles the PCBA will let you keep your build super slim. This breakout gives...
$5.40 AUD, inc GST

USB-A Female Breakout Board

Brand: Core Electronics

Make your own host USB device.

$0.28 AUD, inc GST

Adafruit USB Type C Plug Breakout

Brand: Adafruit
Throw out all those Mini and Micro B USB cables you have in a plastic bin - the next generation of USB connectors is here with USB C! You've seen...
$5.45 AUD, inc GST

SparkFun USB UART Serial Breakout - CY7C65213

Brand: SparkFun
The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header...
$29.70 AUD, inc GST

USB Female Type C Connector

Brand: SparkFun
USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This is...
$6.05 AUD, inc GST

SparkFun USB-C Breakout - Vertical

Brand: SparkFun
With this USB-C breakout you will be able to incorporate a vertical USB-C connector into your projects without needing to solder each tiny SMD pad...
$9.20 AUD, inc GST

Simple USB C Socket Breakout

Brand: Adafruit
This Simple USB Type C breakout is kinda interesting, it looks similar to this USB Type C SMT Inline Breakout Board, but it's an 'inline'...
$3.30 AUD, inc GST

Adafruit USB Type C Vertical Breakout - Downstream Connection

Brand: Adafruit
Throw out all those Mini and Micro B USB cables you have in a plastic bin; the next generation of USB connectors is here with USB C! You will start to see...
$5.90 AUD, inc GST

USB Type C Socket - SMT Inline Breakout Board

Brand: Adafruit
This USB Type C breakout is kinda interesting, it looks similar to Adafruit's right angle USB C socket breakout, but it's an 'inline' style with pads for soldering to the...
$6.40 AUD, inc GST

TPS2113A Power Multiplexer Carrier with USB Micro-B Connector

Brand: Pololu
This breakout board for Texas Instruments’s TPS2113A autoswitching power multiplexer allows you to select which of two power sources is connected to a load while blocking reverse current into either of the sources. It has an adjustable current limit that can be set as high as 2 A and an adjustable switching threshold. Each input power rail on the multiplexer can be supplied with 2.8 V to 5.5 V, and the board also breaks out a USB Micro-B connector that can be used to supply one of the rails.
$16.70 AUD, inc GST

SparkFun USB-C Breakout

Brand: SparkFun
With this USB breakout you will finally be able to incorporate a USB-C connector into your projects without needing to solder each tiny SMD pad. The SparkFun USB-C...
$8.40 AUD, inc GST

SparkFun USB-C Breakout - Horizontal (with Headers)

Brand: SparkFun
The SparkFun USB-C Breakout supplies up to 3 times the power as previous USB board while breaking out each pin on the connector with any SMD soldering...
$9.55 AUD, inc GST

Adafruit CH334F Mini 4-Port USB Hub Breakout

Brand: Adafruit
Sometimes you've got something with USB host, like a embedded linux board, and you want to connect more than one thing. Or maybe you want to turn...
$9.85 AUD, inc GST

Alchitry Br Wide V2

Brand: SparkFun
Check out the all new Br V2! This board breaks out all the signal pins on the Alchitry headers to 0.1" easy to solder holes. Because the stack height on...
$31.60 AUD, inc GST

SparkFun FTDI Starter Kit - 3.3V

Brand: SparkFun
The SparkFun 3.3V FTDI Starter Kit gives you just what you need to get started with FTDI FT232RL USB to serial IC. The pinout of the included board matches the FTDI...
$33.15 AUD, inc GST

Adafruit FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & Stemma QT

Brand: Adafruit
Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer? Sure you can program an Arduino...
$27.80 AUD, inc GST

SparkFun Beefy 3 - FTDI Basic Breakout

Brand: SparkFun
This is SparkFun Beefy 3 FTDI Basic Breakout for the FTDI FT231X USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. Built upon the same foundation as our 3.3V SparkFun FTDI Basic Breakout, the Beefy 3 is equipped with an AP2112K voltage regulator making this FTDI basic breakout board capable of handling a current load of up to 600 mA! With the addition of a more “Beefy” voltage regulator your will now be able to power a 3.3V project directly from the FTDI. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards.
$31.40 AUD, inc GST

Inventor 2040 W (Pico W Aboard)

Brand: Pimoroni
An all-in-one board for making battery powered contraptions that can move, (optionally) make noise, and talk to the internet!
$84.60 AUD, inc GST

Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic

Brand: Adafruit
Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer? Sure you can program an Arduino...
$12.30 AUD, inc GST

SparkFun Serial Basic Breakout - CH340C and USB-C

Brand: SparkFun
This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you...
$19.30 AUD, inc GST

SparkFun ESP8266 Thing

Brand: Espressif ESP32 & ESP8266
The SparkFun ESP8266 Thing is essentially a breakout and development board for the ESP8266 WiFi SoC. Why the name? We lovingly call it the Thing due to it being the perfect foundation for your Internet of Things. Over the past year, the ESP8266 has been a growing star among IoT or WiFi-related projects. It’s an extremely cost-effective WiFi module, that – with a little extra effort – can be programmed just like any microcontroller. The only unfortunate part is: the ESP8266 has mostly only been available in a tiny, modular form, which, with limited I/O and a “unique” pin-out, can be difficult to build a project around. SparkFun’s new development board for the ESP8266 breaks out all of the module’s pins, and comes equipped with a LiPo charger, power supply, and all of the other supporting circuitry it requires.
$33.95 AUD, inc GST

USB to RS485 Converter (FT232)

Brand: Core Electronics

Featuring a MAX485 and FTDI232, this converter will take USB and turn it into an RS485 signal.

$5.24 AUD, inc GST

Edge-Launch USB Type C SMT Plug Connector - Pack of 10

Brand: Adafruit
If you're a DIY enthusiast who'd like to update your project's connection to the latest USB standard, here is a 10-pack of USB C plug connectors! They can be pick-and-placed onto your design, and then plugged directly into a USB C port.
$17.90 AUD, inc GST

USB to RS-485 Converter

Brand: SparkFun
This is the newest revision and fixes issues with the last board. This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps.
$43.65 AUD, inc GST

FTDI Basic Breakout - 3.3V

Brand: SparkFun
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
$34.35 AUD, inc GST

Adafruit KB2040 - RP2040 Kee Boar Driver

Brand: Adafruit
A wild Kee Boar appears! It’s a shiny KB2040! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using...
$16.80 AUD, inc GST

Kitronik Inventors Kit for the BBC micro:bit - Python version

Brand: Kitronik
The Kitronik Inventor's Kit - Python version for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, photoresistors and capacitors. To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!
$51.30 AUD, inc GST

SparkFun Soft Power Switch - USB-C

Brand: SparkFun
The SparkFun Soft Power Switch is a passive, hard on/off switch with software feedback and control via USB-C connectors...
$14.50 AUD, inc GST

SparkFun ESP8266 Thing - Dev Board

Brand: Espressif ESP32 & ESP8266
This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs, trigger relays, monitor sensors, or automate coffee makers, and with an integrated WiFi controller, the ESP8266 is a one-stop shop for almost any Internet-connected project. To top it all off, the ESP8266 is incredibly easy-to-use: firmware can be developed in Arduino, and uploaded over a simple, serial interface. The ESP8266 Thing Development Board breaks out all of the module’s pins, and the USB-to-serial converter means you don’t need any peripheral components to program the chip. Just plug in a USB cable, download the Arduino board definitions, and start IoT-ing.
$33.30 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.