Search results for: 'switching regulator module'

40 results

Adjustable Switching Power Supply Module IN 4V-35V OUT 1.5V-30V LM2596S Step-Down Converter

Brand: Core Electronics
A versatile power supply DC-DC converter module that offers a wide range for both input voltage (4V-35V) and output voltage (1.23V-30V). Tabs on each side allow for the input / output leads to be easily soldered on.
$2.95 AUD, inc GST

AA Boost Module

Brand: DFRobot
The AA boost Module is DFrobot's exclusive product.One key feature is solving the 5V battery power supply problem. As we all know, a dry battery is 1.5V , with two or three you still cannot reach 5V.
$9.34 AUD, inc GST

Pololu 12V Step-Up/Step-Down Voltage Regulator S18V20F12

Brand: Pololu
This powerful step-up/step-down regulator efficiently produces a fixed 12 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage.
$49.10 AUD, inc GST

Pololu 3.3V, 300mA Step-Down Voltage Regulator D24V3F3

Brand: Pololu
The compact (0.4″ × 0.5″) D24V3F3 switching step-down (or buck) voltage regulator takes an input voltage between 4.3 V and 42 V and efficiently reduces it to 3.3 V while allowing for a maximum output current of 300 mA. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
$15.05 AUD, inc GST

MP2636 Power Booster & Charger Module

Brand: DFRobot
In many applications, we will use lithium batteries as our power solutions. In this kind of application, the most two important things are the power boost and battery...
$13.14 AUD, inc GST

Buck/Boost Converter - 8-40V to 12V/3A

Brand: SparkFun
This is an industrial grade DC Buck-Boost converter that inputs 8V to 40V and outputs 12V up to 3A or 36W. With tons of heatsinking and protection, this DC...
$53.30 AUD, inc GST

SparkFun ESP8266 Thing

Brand: Espressif ESP32 & ESP8266
The SparkFun ESP8266 Thing is essentially a breakout and development board for the ESP8266 WiFi SoC. Why the name? We lovingly call it the Thing due to it being the perfect foundation for your Internet of Things. Over the past year, the ESP8266 has been a growing star among IoT or WiFi-related projects. It’s an extremely cost-effective WiFi module, that – with a little extra effort – can be programmed just like any microcontroller. The only unfortunate part is: the ESP8266 has mostly only been available in a tiny, modular form, which, with limited I/O and a “unique” pin-out, can be difficult to build a project around. SparkFun’s new development board for the ESP8266 breaks out all of the module’s pins, and comes equipped with a LiPo charger, power supply, and all of the other supporting circuitry it requires.
$33.95 AUD, inc GST

Pololu A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (SMT Components Only)

Brand: Pololu
This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.8 A per channel and an efficient voltage regulator that allows the controller to work with a 2.7 V to 11 V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3116) does not include any through-hole components or connectors, allowing for customized assembly or standalone use.
$65.15 AUD, inc GST

Adafruit 1.8 Color TFT Shield w/microSD and Joystick

Brand: Adafruit
This lovely little shield is the best way to add a small, colorful and bright display to any project. Adafruit took Adafruit's popular 1.8" TFT breakout board and remixed it...
$63.60 AUD, inc GST

Pololu 6V Step-Up/Step-Down Voltage Regulator S18V20F6

Brand: Pololu
This powerful step-up/step-down regulator efficiently produces a fixed 6 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage.
$50.10 AUD, inc GST

SparkFun BabyBuck Regulator Breakout - 3.3V (AP63203)

Brand: SparkFun

Featuring the AP63203, this baby breakout board takes advantage of a 2A synchronous buck converter that has a wide input voltage range of 3.8V to 32V...

 

 

$8.25 AUD, inc GST

3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5

Brand: Pololu
The S9V11F3S5 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower...
$20.05 AUD, inc GST

Adafruit HalloWing M0 Express

Brand: Adafruit
This is Hallowing..this is Hallowing... Hallowing! Hallowing! Are you the kind of person who doesn't like taking down the skeletons and spiders until after January?...
$60.70 AUD, inc GST

SparkFun ESP8266 Thing Starter Kit

Brand: SparkFun
The SparkFun ESP8266 Thing Starter Kit is a great place to start learning about the Internet of Things (IoT)! Inside this kit you will find a ESP8266 Thing, a Serial...
$61.95 AUD, inc GST

5V Step-Up/Step-Down Voltage Regulator S9V11E2F5

Brand: Pololu

A compact 5 V buck-boost regulator that holds a steady output from 3 V to 16 V inputs, supplying up to 1.7 A at typical efficiencies of 85% to 95%.

$8.25 AUD, inc GST

SparkFun Breadboard Power Supply Stick - 5V/3.3V

Brand: SparkFun
This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard.
$17.70 AUD, inc GST

Pololu 5V Step-Up/Step-Down Voltage Regulator S18V20F5

Brand: Pololu
This powerful step-up/step-down regulator efficiently produces a fixed 5 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage.
$49.15 AUD, inc GST

5V Step-Up Voltage Regulator U3V9F5

Brand: Pololu
*Actual achievable maximum continuous current is a function of input voltage and is limited by thermal dissipation. See the output current graphs on the...
$5.80 AUD, inc GST

Pololu 12V, 500mA Step-Down Voltage Regulator D24V5F12

Brand: Pololu
The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 12 V. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
$14.95 AUD, inc GST

SparkFun ESP8266 Thing - Dev Board (with Headers)

Brand: SparkFun
This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip...
$33.85 AUD, inc GST

Gravity: I/O Expansion Shield for Pyboard

Brand: DFRobot
Gravity: I/O Expansion Shield for pyboard is an multifunctional expansion shield specially designed for pyboard v1.1. It is compatible with various sensors and electronic...
$6.59 AUD, inc GST

SparkFun Buck-Boost Converter

Brand: SparkFun
The SparkFun Buck-Boost Converter is a handy power accessory board that allows you to fine tune the amount of power your project receives. This converter can take...
$25.50 AUD, inc GST

VERTER 5V USB Buck-Boost - 500mA from 3V-5V / 1000ma from 5V-12V

Brand: Adafruit
Convert just about any battery pack to 5V with VERTER - Adafruit's fresh new Buck-Boost power converter. VERTER can take battery voltages from 3-12VDC and output a nice...
$17.60 AUD, inc GST

LED Driver Board for Seeed Studio XIAO - 5V/12V Addressable RGB

Brand: Seeed Studio

Drive 5V or 12V addressable strips straight from a XIAO, with WLED and Home Assistant control built in.

$12.20 AUD, inc GST

4-25V Adjustable Step-down Voltage Regulator D36V6AHV

Brand: Pololu
This compact (0.4" × 0.5") switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a...
$13.40 AUD, inc GST

Kitronik Motor Driver Board for Raspberry Pi Pico

Brand: Kitronik
Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi Pico.
$19.95 AUD, inc GST

Breadboard Power Supply 5V/3.3V

Brand: SparkFun
Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated voltage. The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. Pins labeled VCC and GND plug directly into the power lines. The lone pair of pins have no electrical connection but help support the PCB.
$21.60 AUD, inc GST

Mean Well - 156W 24VDC Switchmode Power Supply

Brand: Core Electronics
Switchmode power supplies offer several significant advantages over traditional linear transformer power supplies.They are far more efficient than their linear counterparts. As they do not use power or mains transformers the equivalent power supply weighs considerably less than traditional types.
$87.45 AUD, inc GST

UPS Module with 5V and 3S LiPo Output

Brand: Waveshare
Uninterruptible Power Supply (UPS) Module, Supports charging And Power output at the same time, 3S & 5V 5A Output...
$38.95 AUD, inc GST

PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+

Brand: Adafruit
PowerBoost is the perfect power supply for your portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that...
$19.80 AUD, inc GST

Pololu 9V, 2.3A Step-Down Voltage Regulator D24V22F9

Brand: Pololu
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V. The board measures...
$62.81 AUD, inc GST

RP2040 Stamp

Brand: Pimoroni
A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST The RP2040...
$27.60 AUD, inc GST

Pimoroni Pico Plus 2 W - RP2350 Dev Board with Pico Shape - PIM726

Brand: Adafruit
The Pimoroni Pico Plus 2 W is a top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST, debug...
$48.50 AUD, inc GST

Adafruit HX711 24-bit ADC for Load Cells / Strain Gauges

Brand: Adafruit
If you are feeling the stress and strain of modern life a Wheatstone bridge and you want to quantify it, this handy breakout will do the job, no sweat!...
$17.40 AUD, inc GST

SparkFun BabyBuck Regulator Breakout - 5V (AP63357)

Brand: SparkFun
The SparkFun BabyBuck Regulator Breakout - 5V features the AP63357, a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V...
$10.20 AUD, inc GST

XBee Shield

Brand: SparkFun
Xbee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions.
$36.90 AUD, inc GST

Pimoroni Pico LiPo 2

Brand: Pimoroni
A top of the line Pirate-brand RP2350-powered microcontroller with 16MB of flash storage, 8MB of PSRAM, USB-C, Qw/ST and built in LiPo charging....
$31.10 AUD, inc GST

20W Adjustable DC-DC Buck Converter with Digital Display

Brand: DFRobot
This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an input of 4~40V DC...
$8.35 AUD, inc GST

PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+

Brand: Adafruit
PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even...
$26.45 AUD, inc GST

3.3V, 600mA Step-Down Voltage Regulator D24V7F3

Brand: Pololu
Note 1: Minimum input voltage is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information...
$4.65 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.