Search results for: &#039;soldering supplies&#039;

Perform precision repairs anywhere. This bundle features dual USB-C/DC power inputs for rapid heating and includes six interchangeable tips for versatile soldering.

$71.90 AUD, inc GST

SparkFun QwiicBus - EndPoint

The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts...

$24.90 AUD, inc GST

Mini Airplane Soldering Kit - Red

Engage in the exciting world of electronics with this Airplane LED Blinking Kit! This DIY soldering project is perfect for beginners, schools, group...

$34.15 AUD, inc GST

Deluxe Solder Stand with Solder Roll Holder

This is such a sweet soldering stand, Adafruit had to carry it in the shop. It comes with a nice heavy metal frame, a double-wrapped soldering iron tube to keep your hands...

$90.95 AUD, inc GST

Solder Paste - 50g (Lead Free)

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way to solder some of the trickier SMD components. Here at SparkFun, we use solder paste stenciling on pretty much all of our boards. It saves us a lot of time. But stenciling takes more than just a stencil and a dream… you’re going to need some paste.

$36.30 AUD, inc GST

ePaper Driver Board for Seeed Studio XIAO

Brand: Seeed Studio

The ePaper driver board features a 24-pin FPC connector, built-in charging IC for efficient and safe battery charging, and a JST 2-pin BAT connector for easy battery connection. Ideal for creating WiFi-enabled digital photo frames.

$9.20 AUD, inc GST

Motoron M2S24v14 Dual High-Power Motor Controller Shield for Arduino (Connectors Soldered)

The Motoron M2S24v14 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or...

$119.95 AUD, inc GST

For SMD components. Allows for easier removal when desoldering. 10cc syringe.

No Clean Solder Flux Gel/Paste Syringe 10CC

Brand: Core Electronics

$17.65 AUD, inc GST

SAC305 Lead Free Solder Paste 10g Syringe

Brand: Core Electronics

NC257-2 has been developed to offer extremely broad process windows for printing, wetting and pin-probe testing.

$20.35 AUD, inc GST

Art Deco Cat Lamp - Soldering Kit by Elkai Education

Create a 3D Art Deco-like Cat Lamp with this beautifully designed soldering kit from our maker friends down under, Elkai...

$53.50 AUD, inc GST

Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi B+

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.

$25.15 AUD, inc GST

Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino (Connectors Soldered)

The Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or...

$119.95 AUD, inc GST

PiicoDev Button

Brand: PiicoDev

An accessible, tactile interface adds control to your project.

$8.05 AUD, inc GST

Dual/Single Motor Driver Carrier TB67H420FTG

This breakout board makes it easy to use Toshiba’s TB67H420FTG brushed DC motor driver, which can operate in either dual-channel mode for independent bidirectional control of two motors or single-channel mode for driving one motor with increased current. It has a wide operating voltage range of 10 V to 47 V and can deliver a continuous 1.7 A to each motor channel, or 3.4 A in single-channel mode. A configurable current chopping threshold allows the TB67H420 to actively limit the motor current, and it features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).

$21.40 AUD, inc GST

The IO Pi Plus is a 32 channel digital expansion board designed for use on the Raspberry Pi. The board is based around the MCP23017 16-bit I/O expander from Microchip Technology Inc. A pair of MCP23017 expanders are included on the board allowing you to connect up to 32 digital inputs or outputs to the Raspberry Pi. The IO Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the IO Pi Plus along with other expansion boards.

IO Pi Plus

Brand: AB Electronics

$28.60 AUD, inc GST

ACHS-7121 Current Sensor Carrier -10A to +10A

This board is a simple carrier of Broadcom’s bidirectional ±10A ACHS-7121 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...

$17.20 AUD, inc GST

Dual MAX14870 Motor Driver for Raspberry Pi (Partial Kit)

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small...

$41.80 AUD, inc GST

Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC)

$74.85 AUD, inc GST

Dual TB9051FTG Motor Driver Shield for Arduino

This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual TB9051FTG motor drivers operate from...

$53.50 AUD, inc GST

A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure. It's Raspberry Pi and Arduino-compatible.

Pimoroni BME280 Breakout - Temperature, Pressure, Humidity Sensor

Brand: Pimoroni

$34.80 AUD, inc GST

Pololu Dual MC33926 Motor Driver Shield for Arduino

This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers operate from 5 to 28 V and can deliver a continuous 3 A per motor. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.

$81.70 AUD, inc GST

SparkFun LuMini LED Ring - 2 Inch (40 x APA102-2020)

This is the two inch version of the SparkFun LuMini LED Ring, packed with 40 individually addressable LEDs, each capable of producing 16 million colors, it provides...

$34.30 AUD, inc GST

Arduino Leonardo (Without Headers)

Brand: Arduino

$37.55 AUD, inc GST

Adafruit Wiz5500 Ethernet Co-Processor Breakout Board

Wireless is wonderful, but sometimes you want the strong reliability of a wire. If you want to incorporate an Ethernet port as a great addition to your...

$34.95 AUD, inc GST

Motoron M2T256 Dual I²C Motor Controller (Header Pins Soldered)

The Motoron M2T256 Dual I²C Motor Controller offers a compact solution for controlling two DC motors using an I²C interface. Multiple Motoron controllers...

$41.65 AUD, inc GST

$64.00 AUD, inc GST $45.13

GlowBit Pico Orb Bauble Kit

Brand: GlowBit

Merry Christmas! Add this ready-to-go, flashy-festive ornament to your Christmas decoration library. A perfect addition to any Makers tree!

Assembled Pi T-Cobbler Plus - GPIO Breakout

This is the assembled version of the Pi T-Cobbler Plus. This cobbler will break out your Pi's GPIO pins, with a labelled circuit board making prototyping easy like it should be.

$17.10 AUD, inc GST

Pololu Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered)

The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).

$109.95 AUD, inc GST

SparkFun LuMini LED Ring - 1 Inch (20 x APA102-2020)

This is the one inch version of the SparkFun LuMini LED Ring, packed with 20 individually addressable LEDs, each capable of producing 16 million colors, it provides...

$19.80 AUD, inc GST

Raspberry Pi DigiAMP+

Brand: Raspberry Pi

The Raspberry Pi DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2 x 35W with variable output. Ideal for a Raspberry Pi-based hi-fi system.

$51.30 AUD, inc GST

Adafruit NeoDriver - I2C to NeoPixel Driver Board - Stemma QT

NeoPixel LEDs (a.k.a WS2812 / SK6812 family) are a super-easy way to add addressable RGB lighting with only one GPIO. They're ubiquitous on...

$14.40 AUD, inc GST

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 pixel, monochrome white/black display is ideal for graphing, readouts, and displaying basic icons

Pimoroni 1.12" Mono OLED (128x128, white/black) Breakout

Brand: Pimoroni

$35.95 AUD, inc GST

Universal Qi Wireless Receiver Module

If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a...

$29.90 AUD, inc GST

Extech EX330 12-function autoranging multimeter - EX330

If you're looking for one of the best multimeters, Adafruit are proud to now offer Adafruit's personal favorite! The Extech EX330 "12 Function Mini MultiMeter + Non-Contact Voltage...

$194.95 AUD, inc GST

Pimoroni GFX HAT - 128x64 LCD Display with RGB Backlight and Touch Buttons

Brand: Pimoroni

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interfaces for your headless Pi projects.

$37.80 AUD, inc GST