Search results for: &#039;rf connectors&#039;

Edge-Launch SMA Connector for 0.8mm / 0.031 Slim PCBs

This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a "half thickness" 0.031" thick PCB (or thinner!) and...

$4.50 AUD, inc GST

Female SMA to Male RP-SMA RF Adapter

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors.

$5.75 AUD, inc GST

Interface Cable - SMA Male to SMA Female (25cm, RG174)

This is a basic SMA male to female connector cable at 25cm in length and RG174 housing...

$6.90 AUD, inc GST

RP-SMA Male to SMA Female Adapter

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.

$4.05 AUD, inc GST

Software Defined Radio Receiver USB Stick - RTL2832 w/R820T

If you've ever been curious about software defined radio (SDR), this USB stick is the easiest way possible to have fun with a powerful, configurable receiver. Packed...

$58.50 AUD, inc GST

Out of stock

Interface Cable - RP-SMA Male to RP-SMA Female (10M, RG58)

This is a basic RP-SMA male to female connector cable at 10M in length and RG58 housing...

$44.55 AUD, inc GST

Particle Photon 2

Brand: Particle

Loaded with 2.4 and 5GHz WiFi, BLE 5, and much more RAM and flash - the Photon 2 is perfect for your next IoT project.

$25.95 AUD, inc GST

Interface Cable - SMA Female to SMA Male (25cm)

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connections.

$9.60 AUD, inc GST

Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz

Never hunt around for another crystal again, with the Si5351A clock generator breakout from Adafruit! This chip has a precision 25MHz crystal reference...

$13.90 AUD, inc GST

Pulsar Cable RAK9731 (N-Male/N-Female, 3m)

Brand: RAKwireless

Use a rugged outdoor low-loss feed line to relocate antennas and boost LoRaWAN coverage for edge gateways with minimal signal loss.

$39.75 AUD, inc GST

MCX Jack to SMA RF Cable Adapter

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna...

$8.70 AUD, inc GST

Most HAM and two-way handheld radio antennas and devices are designed for BNC connectors. This BNC-female to SMA-male connector will easily interface your...

SMA-BNC adapter SMA Plug to BNC Jack straight (Seeed Studio)

Brand: Seeed Studio

$8.60 AUD, inc GST

Out of stock

GNSS Multi-Band L1/L2 Surveying Antenna (TNC) - TOP106

The TOP106 from TOPGNSS is a GNSS/GPS antenna capable of receiving the L1/L2 bands for GPS, GLONASS, Galileo, and BeiDou constellations. These 'UFO' antennas have...

$409.95 AUD, inc GST

SparkFun LoRa Thing Plus - expLoRaBLE

The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the...

$92.35 AUD, inc GST

SparkFun Antenna - SMA, 2dBi (433MHz)

A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi...

$32.95 AUD, inc GST

iPEX to RP-SMA Connector (65mm)

Brand: RAKwireless

Securely link LoRa modules to external antennas with iPEX MHF-1 to RP-SMA/SMA RF coaxial cables for stable signal reception.

$8.50 AUD, inc GST

Iridium/GPS/GLONASS Passive Antenna

The M1600HCT-P-SMA is unique antenna combining the ability to communicate with the Iridium satellite network while simultaneously receiving L1 GNSS signals...

$154.95 AUD, inc GST

Interface Cable N to RP-SMA Cable - 1m

This connector cable interfaces N type female to RP-SMA male. Primarily used to connect our larger 915MHz LoRa antenna to RP-SMA connections but can be used on other...

$15.85 AUD, inc GST

SparkFun MicroMod WiFi Function Board - DA16200

The SparkFun MicroMod DA16200 Function Board adds a fully integrated WiFi module to any MicroMod project...

$50.85 AUD, inc GST

Adafruit Si5351A Clock Generator Breakout Board - 8KHz to 160MHz

Never hunt around for another crystal again, with the Si5351A clock generator breakout from Adafruit! This chip has a precision 25MHz crystal reference and internal...

$14.60 AUD, inc GST

The 2.4Ghz directional antenna is a high gain, excellent choice to use RF Explorer analyzer to scan in a specific direction. As opposed to omnidirectional...

Directional Patch 2.4Ghz SMA Articulated Antenna (Seeed Studio)

Brand: Seeed Studio

$25.85 AUD, inc GST

Edge-Launch SMA Connector for 1.6mm / 0.062 Thick PCBs

This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a standard 0.063" thick PCB and 'launches' off of the...

$5.05 AUD, inc GST

BNC Connector - Right Angle

BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.

$4.95 AUD, inc GST

SMA Male to SMA Male Adapter

This adapter has a standard polarity Male SMA connection at both ends. It allows you to convert a standard polarity Female SMA connection to Male. You c...

$7.10 AUD, inc GST

Adafruit ESP32-S3 Feather 8MB with w.FL Antenna

Coming soon! Sign up to be notified when these are in stockThe ESP32-S3 has arrived in Feather format - and what a great way to get started with this...

$30.55 AUD, inc GST

2.4GHz Duck Antenna RP-SMA - Large

Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance.

$30.90 AUD, inc GST

The new COMBO product includes harmonic filtering, high-performance amplifiers for higher output power, fine amplitude adjustment and support for frequencies as low as 100KHz covering up to 6GHz with no gaps.

RF Explorer Signal Generator COMBO (Seeed Studio)

Brand: Seeed Studio

$624.95 AUD, inc GST