Search results for: 'pneumatic tubing'

Gravity: digital peristaltic pump is a new product developed by DFRobot. This is a new member of our water quality monitoring devices. It is an actuator for the...

Use this amphibious micro submersible pump to build a small fountain, make auto water changer, or DIY plant-watering project! This product is powered by 3-6V and...

Move fluid from here to there with this very nice elastomeric silicone tubing, specifically for Adafruit's peristaltic pump. It's one meter long and fully silicone with...

This latex tubing, commonly referred to as surgical tubing has.....

This super-easy-to-use air pump with 2.2 LPM flow rate and -58kpa Maximum Vacuum is very suitable for beginners to make inflatable or pneumatic projects...

Move fluid safely from here to there with this very nice Peristaltic Pump that works with 5V or 6V power. Unlike most liquid pumps, this is a peristaltic type -...

This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance...

Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic type - the pump squishes the silicone tubing...

The Bowden tube, 70.5 cm long. Made from PFA. Outside diameter 0.25 inch, inside 0.125 inch is used to transport the filament to the extruder head. Includes two Clamp Clips and two Tube Coupling Collets.

No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a “drag chain,” each carrier can be used in projects with a large number of moving parts to protect internally installed cables, pipes, or tubes so they can be bent and moved while remaining protected. Cable carriers can most commonly been found in 3D printers and CNC machines but they can be used in any situation where you need cables or tubes to bend without risk of them being damaged or wearing out prematurely.

This flanged aluminum tube is the peanut butter to a 32mm bore pillow block's jelly!

These plastic Flexible Coolant Pipes have been primarily used to spray refrigeration or washing fluid for machine tools but, thanks to their articulation, they can be used in a multitude of different ways as well. We use them as extra arms for our third hand.

8mm ID x 10mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly, or as a sleeve over.....

6mm ID x 8mm OD Aluminum Tubing can be used to add structural support to a lightweight chassis, as an axle in a rotating assembly or as a.....

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they've already been plugged in, or when you have many cables going to differnet places.