Search results for: 'ptfe tube'

37 results

PTFE Cable-Guide Tubing (2mm ID, 4mm OD, 1 meter Length)

Brand: goBilda
This Cable-Guide Tubing allows you to guide cable along unorthodox paths as well as safely through 4mm holes. Both of those capabilities.....
$10.25 AUD, inc GST

Ultimaker Bowden Tube + Collets +Clips

Brand: Ultimaker
The Bowden tube, 70.5 cm long. Made from PFA. Outside diameter 0.25 inch, inside 0.125 inch is used to transport the filament to the extruder head. Includes two Clamp Clips and two Tube Coupling Collets.
$47.08 AUD, inc GST

Hot End Isolator for Ultimaker 2 and 2+ Series

Brand: Ultimaker
This is the interface part between the PTFE Insulator and the Integrated Nozzle Block.
$59.21 AUD, inc GST

Ultimaker 2 TFM Insulator

Brand: Ultimaker

Ultimaker 2+ Model TFM Insulator

$35.48 AUD, inc GST

Cable Carrier - 10x15mm (0.5m Length)

Brand: Sparkfun
No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a “drag chain,” each carrier can be used in projects with a large number of moving parts to protect internally installed cables, pipes, or tubes so they can be bent and moved while remaining protected. Cable carriers can most commonly been found in 3D printers and CNC machines but they can be used in any situation where you need cables or tubes to bend without risk of them being damaged or wearing out prematurely.
$29.75 AUD, inc GST
Similar matches

Heat Shrink Tubing (560pc Assortment Pack)

Brand: goBilda
For those not afraid to modify! This assortment pack consists of 560 pieces of 38mm length heat-shrink in various diameters and colors.....
$20.45 AUD, inc GST

Super Lube Synthetic Grease With PTFE (Clear, 1mL) - 2 Pack

Brand: goBilda
A small 2 pack of Super Lube Synthetic Grease With PTFE
$4.95 AUD, inc GST

Replacement Tubes for Professional Silicone-Tip Solder Sucker - SS-02 (PAIR)

Brand: Adafruit
This pair of Silicone Tubes are replacements for your fancy professional silicone-tipped solder sucker! You can just cut a new section off as necessary. Silicone nozzles...
$4.35 AUD, inc GST

PTC Heating Element - 5V 100°C

Brand: DFRobot
This thermostatic ceramic PTC heating element can be used to automatically maintain a constant temperature without special temperature controllers and...
$4.55 AUD, inc GST

4100 Series Aluminum Tube (6mm ID x 8mm OD, 100mm Length)

Brand: goBilda
6mm ID x 8mm OD Aluminum Tubing can be used to add structural support to a lightweight chassis, as an axle in a rotating assembly or as a.....
$5.90 AUD, inc GST

4100 Series Aluminum Tube (12mm ID x 14mm OD, 50mm Length)

Brand: goBilda
12mm ID x 14mm OD Aluminum Tubing can be used to add structural support to a chassis, as a sleeve over a
$7.75 AUD, inc GST

4100 Series Aluminum Tube (12mm ID x 14mm OD, 300mm Length)

Brand: goBilda
12mm ID x 14mm OD Aluminum Tubing can be used to add structural support to a chassis, as a sleeve over a
$11.70 AUD, inc GST

4100 Series Aluminum Tube (6mm ID x 8mm OD, 200mm Length)

Brand: goBilda
6mm ID x 8mm OD Aluminum Tubing can be used to add structural support to a lightweight chassis, as an axle in a rotating assembly or as a.....
$7.60 AUD, inc GST

4100 Series Aluminum Tube (8mm ID x 10mm OD, 300mm Length)

Brand: goBilda
8mm ID x 10mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly, or as a sleeve over.....
$9.95 AUD, inc GST

Peristaltic Liquid Pump with Silicone Tubing

Brand: Adafruit
Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic type - the pump squishes the silicone tubing...
$52.35 AUD, inc GST

T-Connector For Silicone Tubing - 5 Pack

Brand: Adafruit
These go great with Adafruit's silicone tubing for air pumps and valves - great for making adapters or splitters. The three ports have an outer diameter of about 4mm, so 3mm ID silicone tubing with make a nice seal. Comes in a pack of 5, so you have plenty to mess with.
$8.15 AUD, inc GST

4100 Series Aluminum Tube (12mm ID x 14mm OD, 200mm Length)

Brand: goBilda
12mm ID x 14mm OD Aluminum Tubing can be used to add structural support to a chassis, as a sleeve over a
$10.85 AUD, inc GST

4100 Series Aluminum Tube (10mm ID x 12mm OD, 150mm Length)

Brand: goBilda
10mm ID x 12mm OD Aluminum Tubing can be used to add structural.....
$8.45 AUD, inc GST

4100 Series Aluminum Tube (6mm ID x 8mm OD, 300mm Length)

Brand: goBilda
6mm ID x 8mm OD Aluminum Tubing can be used to add structural support to a lightweight chassis, as an axle in a rotating assembly or as a.....
$9.15 AUD, inc GST

4100 Series Aluminum Tube (10mm ID x 12mm OD, 50mm Length)

Brand: goBilda
10mm ID x 12mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly or as a sleeve over.....
$6.75 AUD, inc GST

4100 Series Aluminum Tube (12mm ID x 14mm OD, 150mm Length)

Brand: goBilda
12mm ID x 14mm OD Aluminum Tubing can be used to add structural support to a chassis, as a sleeve over a
$9.95 AUD, inc GST

Peristaltic Pump

Brand: Core Electronics

Pump liquid without any electronic components interacting with it - these style of pumps squish the tube, moving fluid along.

$20.65 AUD, inc GST

High Temp Waterproof DS18B20 Digital temperature sensor + extras

Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet...
$28.70 AUD, inc GST

Stickvise High Temperature PTFE Jaws (pair)

Brand: Adafruit
Are you concerned that your smokin' hot soldering skills will set your project alight? There is no more need to fear the heat! These High-Temperature PTFE Jaws are...
$36.65 AUD, inc GST

4102 Series Aluminum Flanged Tube (27mm ID x 32mm OD, 55mm Length)

Brand: goBilda
This flanged aluminum tube is the peanut butter to a 32mm bore pillow block's jelly!
$9.65 AUD, inc GST

4100 Series Aluminum Tube (27mm ID x 32mm OD, 300mm Length)

Brand: goBilda
27mm ID x 32mm OD Aluminum Tubing is the largest diameter tubing we offer, and with the thickest wall for unmatched strength. The 27mm...
$20.10 AUD, inc GST

4102 Series Aluminum Flanged Tube (28mm ID x 32mm OD, 39mm Length)

Brand: goBilda
This flanged aluminum tube is the appropriate length for use with 32mm
$6.20 AUD, inc GST

4100 Series Aluminum Tube (10mm ID x 12mm OD, 100mm Length)

Brand: goBilda
10mm ID x 12mm OD Aluminum Tubing can be used to add structural.....
$7.60 AUD, inc GST

4100 Series Aluminum Tube (10mm ID x 12mm OD, 200mm Length)

Brand: goBilda
10mm ID x 12mm OD Aluminum Tubing can be used to add structural.....
$9.15 AUD, inc GST

4100 Series Aluminum Tube (12mm ID x 14mm OD, 100mm Length)

Brand: goBilda
12mm ID x 14mm OD Aluminum Tubing can be used to add structural support to a chassis, as a sleeve over a
$9.10 AUD, inc GST

4100 Series Aluminum Tube (8mm ID x 10mm OD, 50mm Length)

Brand: goBilda
8mm ID x 10mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly, or as a sleeve over.....
$5.90 AUD, inc GST

4100 Series Aluminum Tube (8mm ID x 10mm OD, 200mm Length)

Brand: goBilda
8mm ID x 10mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly, or as a sleeve over.....
$8.50 AUD, inc GST

4100 Series Aluminum Tube (10mm ID x 12mm OD, 300mm Length)

Brand: goBilda
10mm ID x 12mm OD Aluminum Tubing can be used to add structural.....
$10.85 AUD, inc GST

4100 Series Aluminum Tube (8mm ID x 10mm OD, 100mm Length)

Brand: goBilda
8mm ID x 10mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly, or as a sleeve over.....
$6.75 AUD, inc GST

4100 Series Aluminum Tube (6mm ID x 8mm OD, 50mm Length)

Brand: goBilda
6mm ID x 8mm OD Aluminum Tubing can be used to add structural support to a lightweight chassis, as an axle in a rotating assembly or as a.....
$5.05 AUD, inc GST

4100 Series Aluminum Tube (8mm ID x 10mm OD, 150mm Length)

Brand: goBilda
8mm ID x 10mm OD Aluminum Tubing can be used to add structural support to a chassis, as an axle in a rotating assembly, or as a sleeve over.....
$7.60 AUD, inc GST

4100 Series Aluminum Tube (6mm ID x 8mm OD, 150mm Length)

Brand: goBilda
6mm ID x 8mm OD Aluminum Tubing can be used to add structural support to a lightweight chassis, as an axle in a rotating assembly or as a.....
$6.75 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.