Search results for: 'pcb standoffs'
Learn
10 sets M3 * 20 nylon standoffs
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$3.47 AUD, inc GST
10 sets M3 * 10 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.
$3.96 AUD, inc GST
10 sets M3 * 10 nylon standoff
Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.37 AUD, inc GST
Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which is...
$6.50 AUD, inc GST
Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.55 AUD, inc GST
M3 Mounting Kit (Standoffs)
Brand: DFRobot
This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.
$39.74 AUD, inc GST
M2.5 Standoffs for Pi HATs
Brand: Pimoroni
These standoffs are perfect for keeping your HATs off of your Raspberry Pi
$3.95 AUD, inc GST
Standoff Kit - 210 Piece
Brand: Sparkfun
This 210 piece brass standoff kit insures you'll always have a set handy...
$40.45 AUD, inc GST
Aluminum Standoff for Raspberry Pi: 11mm Length, 4mm M2.5 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...
$5.45 AUD, inc GST
10 sets M3 * 20 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$5.16 AUD, inc GST
10 sets M3 * 30 nylon standoffs
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$3.61 AUD, inc GST
Short 7mm Pi HAT standoffs
Brand: Pimoroni
These short standoffs will let you securely attach compatible HATs to a Pi Zero or Zero W, to make a nice, slim sandwich…
$6.30 AUD, inc GST
10 sets M3 * 30 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.
$5.74 AUD, inc GST
10 sets M3 * 50 hexagonal standoffs mounting kit
Brand: DFRobot
Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis.
$7.71 AUD, inc GST
SMT / Solderable Standoff Nuts - M3 x 6mm - 10 pack
Brand: Adafruit
These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...
$6.10 AUD, inc GST
Alchitry Standoff Hardware
Brand: Sparkfun
Protect your Alchitry board by adding these stylish standoffs!
The bolts protrude about 2mm below the board which is just further than the lowest part on...
$6.15 AUD, inc GST
Board Edge Mounting Kit - Pack of 4
Brand: Adafruit
Having difficulty attaching a PCB? This kit is especially useful when there are no mounting holes - as with the original Raspberry Pi. Instead of gluing, taping...
$5.95 AUD, inc GST
Nylon Spacer: 2mm Length, 5mm OD, 3.3mm ID (50-Pack)
Brand: Pololu
Keep your components separated with this 50-pack of 2mm-long (0.08") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
$5.65 AUD, inc GST
Aluminum Standoff: 1/2" Length, 4-40 Thread, F-F (4-Pack)
Brand: Pololu
These 1/2"-long hexagonal female-female aluminum standoffs keep parts spaced 0.5 inches (13 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.
$7.20 AUD, inc GST
Standoffs Plastic - (4-40; 3/4"; 10 pack)
Brand: Sparkfun
These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
$7.65 AUD, inc GST
Aluminum Standoff: 1/4" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.25" (6 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$5.05 AUD, inc GST
SMT / Solderable Standoff Nuts - M3 x 3mm - 10 pack
Brand: Adafruit
These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...
$5.70 AUD, inc GST
Standoffs Plastic (4-40; 3/8"; 10 pack)
Brand: Sparkfun
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.
$6.40 AUD, inc GST
1501 Series Standoffs Bundle
Brand: goBilda
Standoffs can provide clearance, adjust the distance between parallel parts, add structural integrity, add a threaded hole for mounting other components, or mount a bearing on in a rotating assembly.
$229.95 AUD, inc GST
Aluminum Standoff: 1/2" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.5" (13 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$4.95 AUD, inc GST
1513 Series Offset Standoff (4mm Length) - 4 Pack
Brand: goBilda
For those times where it would be helpful to have holes offset 4mm from the original locations. Offset standoffs have three mounting...
$10.10 AUD, inc GST
Computer Repair Screw and Standoff Kit
Brand: Adafruit
The Computer Repair Screw and Standoff Kit contains all those bits and pieces that get lost whenever installing stuff into your computer or electronics...
$32.45 AUD, inc GST
Aluminum Standoff: 1" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.
$6.45 AUD, inc GST
Aluminum Standoff: 1/2" Length, 4-40 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 0.5" (13 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.
$5.65 AUD, inc GST
Aluminum Standoff: 1-1/2" Length, 2-56 Thread, M-F (4-Pack)
Brand: Pololu
These hexagonal male-female aluminum standoffs keep parts spaced 1.5" (38 mm) apart and are great for building a multi-level robot chassis. Both ends of...
$8.95 AUD, inc GST
NVMe Base for Raspberry Pi 5 – NVMe Base
Brand: Pimoroni
Add super-fast storage to your Raspberry Pi 5 allowing for lightening fast boots, NAS use, and snappy applications!...
$26.20 AUD, inc GST
DINrPlate Universal - PCB DIN Rail Mount
Brand: Core Electronics
The DINrPlate Universal is an innovative universal DIN Rail mounting solution with sliding, rotating standoffs allowing it to accommodate a wide range of...
$32.40 AUD, inc GST
Bus Blaster v3 acrylic case v1 (SoBv1-DP8049) (Seeed Studio)
Brand: Seeed Studio
A clear laser-cut acrylic case kit for the Bus Blaster v3. This case is designed to be simple, cheap, and easy to assemble. The Bus Blaster PCB is sandwiched...
$6.85 AUD, inc GST
Pimoroni Black/White – Inky wHAT (ePaper/eInk/EPD)
Brand: Pimoroni
Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi
$109.95 AUD, inc GST
Similar matches
Pimoroni Mini Black HAT Hack3r
Brand: Pimoroni
Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!
$33.20 AUD, inc GST
Pimoroni Yellow/Black/White – Inky wHAT (ePaper/eInk/EPD)
Brand: Pimoroni
Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi
$114.95 AUD, inc GST
Metal Rework Station Stand with Two Clips and Four PCB Holders
Brand: Adafruit
This mini rework station is great for electronic work and repair. These were initially marketed for people doing cell phone repair and rework, and...
$139.95 AUD, inc GST
Pimoroni pHAT Stack
Brand: Pimoroni
A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once.
$44.55 AUD, inc GST
Circuit Playground 200x200 Tri-Color E-Ink Gizmo - E-Ink Display + Audio Amplifier
Brand: Adafruit
Extend and expand your Circuit Playground projects with a bolt-on E-Ink Gizmo that lets you add a lovely tri-color e-Ink display in a sturdy and reliable fashion. This PCB looks just like a round E-Ink breakout but has permanently affixed M3 standoffs that act as mechanical and electrical connections.
$40.40 AUD, inc GST
Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier
Brand: Adafruit
Coming soon! Extend and expand your Circuit Playground projects with a bolt on TFT Gizmo that lets you add a lovely color display in a sturdy and reliable fashion...
$36.80 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.