Search results for: 'adhesive standoffs'

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.

These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.

"These go to eleven." 11 millimeters that is! Adafruit's Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping...

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which is...

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.

These standoffs are perfect for keeping your HATs off of your Raspberry Pi

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just...

Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end!

This 210 piece brass standoff kit insures you'll always have a set handy...

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis.

Finally Adafruit get Adafruit's very own super sweet sixteen... 16 millimeters that is! Adafruit's Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT...

These short standoffs will let you securely attach compatible HATs to a Pi Zero or Zero W, to make a nice, slim sandwich…

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.

14mm length standoffs can be used to add structural rigidity between parallel plates, as a stub-axle to run bearings and rotating...

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin...

Protect your Alchitry board by adding these stylish standoffs! The bolts protrude about 2mm below the board which is just further than the lowest part on...

A 30mm long aluminium standoff for M4 threaded screws

These 1/2"-long hexagonal female-female aluminum standoffs keep parts spaced 0.5 inches (13 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.

The 120mm length, M4-threaded, 8mm REX Standoff provides clearance, adjusts distances between parallel parts, and reinforces structures....

A 42mm long aluminium standoff for M4 threaded screws

A 20mm long aluminium standoff for M4 threaded screws

Having difficulty attaching a PCB? This kit is especially useful when there are no mounting holes - as with the original Raspberry Pi. Instead of gluing, taping...

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.

These hexagonal male-female aluminum standoffs keep parts spaced 0.25" (6 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.

These hexagonal male-female aluminum standoffs keep parts spaced 0.75" (19 mm) apart and are great for building a multi-level robot chassis.Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.

A 24mm long aluminium standoff for M4 threaded screws

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.

These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.

These hexagonal male-female aluminum standoffs keep parts spaced 1.5" (38 mm) apart and are great for building a multi-level robot chassis. Both ends of...

These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.

These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4.

These 1/4"-long hexagonal female-female aluminum standoffs keep parts spaced 0.25 inches (6.4 mm) apart. They are like elongated, 3/16″-wide hex nuts, with 4-40 threads running through the entire length of each standoff. They are sold in packs of 4.

These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4.