Search results for: 'navigation switch'

We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly. Perfect as a tactile reset switch. These buttons are rated up to 50mA.

Miniature Single Pole Single Throw switches. These are high quality Omron type B3F momentary on switches. Perfect as a tactile reset switch.

This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off. Additional control inputs allow advanced applications such as automatic shutdown by the device being powered. This low-voltage (LV) version operates from 2.2 V to 20 V and can deliver continuous currents up to around 6 A.

When you need a lot of options, you need a Mini 8-Way Rotary Selector Switch. This is basically a single-pole to 8-throw switch. As you rotate the knob around, the...

Snap in fitting. SPST 250VAC 6A. Black body, black actuator.

IP67 rated for harsh environments, low profile dome shape, momentary action.

These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals, the two that you would normally see plus a ground tab for the blue LED lamp inside. Although these are rated for 12v, the LED works with as little as 5V.

This inline switch is great when you just want a simple on/off toggle switch that’s already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires, solder them in place, and press-fit the enclosure together and you have a clean-looking switch.

A rotary switch is a switch operated by rotation. It is often used when more than 2 positions are needed, such as multi-speed control.

The toggle switch Bit is sturdy on/off switch that you can use to activate your creations with a nice, solid click. Try using it after a USB power Bit as an on/off switch for your whole creation.

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed...

Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. Adafruit like this switch because it's easy to embed...

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based...

Your friends probably tell you that you are "good with your hands," but now you can also be good with your feet! This foot switch is made of rubbery plastic, is plenty strong to put up with any amount of stomping, and contains a snap switch. You can use the switch as either a "normally open" or "normally closed" type. Attached to the switch is a 2 meter long cable so you can wire it directly to your project.

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed...

The slide switch is a small and convenient way to turn your creations on and off. It uses a sturdy plastic lever to switch back and forth. Try it with any of your favorite Bits, like the DC motor or bright LED!