Search results for: 'jst tool'
Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG
Brand: Pololu
This crimping tool can be used to crimp both male and female versions of Pololu's Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1″ housings onto 16-28 AWG wires to make custom cables. The crimping die has a width of 7 mm, and the tool offers ratcheting action for increased consistency and ease of use.
$139.95 AUD, inc GST
Universal Crimping Pliers - 1.6 to 2.5mm Size Contacts - PA-21
Brand: Adafruit
Make cables and wiring harnesses with ease using the best crimping pliers Adafruit have used. These precision machined crimpers will turn you into a pro, no more painful...
$124.95 AUD, inc GST
SparkFun JST Battery Removal Tool
Brand: Sparkfun
The SparkFun JST battery removal tool is a tool to remove a standard 2-pin JST-PH connector (2mm pitch) from its housing! Use the JST battery removal tool...
$9.85 AUD, inc GST
Adafruit JST PH Remover / Puller for LiPoly / LiIon Batteries
Brand: Adafruit
Here's a great accessibility tool for removing Lipoly batteries with a JST connector from your board. Maybe you've got bigger hands or a gorgeous...
$3.70 AUD, inc GST
JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit
Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$23.80 AUD, inc GST
JST RCY Connector Pack, Male
Brand: Pololu
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.
$6.30 AUD, inc GST
Similar matches
JST PH 2-Pin Cable – Male Header 200mm
Brand: Adafruit
For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
$1.60 AUD, inc GST
Raspberry Pi Debug Probe
Brand: Raspberry Pi
Use this RP2040-based probe to make debugging UART and SWD devices a breeze!
$17.30 AUD, inc GST
JST 2-pin Extension Cable with On/Off Switch - JST PH2
Brand: Adafruit
By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...
$6.35 AUD, inc GST
JST-PH Jumper 2 Wire Assembly
Brand: Sparkfun
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
$2.20 AUD, inc GST
JST-PH 2 Pin Female Connector
Brand: DFRobot
This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).
$1.17 AUD, inc GST
JST RCY Plug with 10cm Leads, Male
Brand: Pololu
This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.
$4.95 AUD, inc GST
JST PH 4-Pin Socket to Color Coded Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...
$2.10 AUD, inc GST
JST-XH Extension Cable - 2.5mm Pitch - 500mm long
Brand: Adafruit
We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of...
$2.70 AUD, inc GST
JST SH-Style Cable, 4-Pin, Single-Ended Female, 75cm
Brand: Pololu
This 4-conductor, 75 cm (30") cable has 28 AWG wires and a 4-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...
$5.55 AUD, inc GST
JST SH Jumper 4 Wire Assembly - 8"
Brand: Sparkfun
This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.
$3.80 AUD, inc GST
JST SH 4-pin Vertical Connector (10-pack) - Qwiic Compatible
Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.05 AUD, inc GST
JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible
Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.95 AUD, inc GST
JST SH-Style Cable, 4-Pin, Female-Female, 63cm
Brand: Pololu
This 4-conductor, 63 cm (25") cable has 28 AWG wires and 4-pin female JST SH-type connectors on both ends...
$6.75 AUD, inc GST
JST SH Jumper 6 Wire - 1 Foot
Brand: Sparkfun
This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module may be a distance away from the controller board. Cable has two 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
$6.80 AUD, inc GST
Adafruit NeoPixel Breakout with JST SH Connectors
Brand: Adafruit
This little breakout makes it easy to add a single NeoPixel to a project, with mounting holes and a pluggable connector. The PCB is less than...
$3.95 AUD, inc GST
JST PH 3-pin Horizontal Connector (10-pack) - STEMMA
Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 3 pin. These...
$6.60 AUD, inc GST
Barrel Jack to 2-pin JST PH 2mm
Brand: Sparkfun
Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!
$6.10 AUD, inc GST
JST PH 3-pin Vertical Connector (10-pack) - STEMMA
Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 3 pin. These...
$6.70 AUD, inc GST
JST-PH 3 Holes Female Connector
Brand: DFRobot
This product includes 3-pin 2.0mm mating connector housing(10 units) and crimp pins (30 units).
$1.19 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.