Search results for: 'jst connector cable'

Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...

This 600mm length 4-Pos JST cable has female connectors at both ends for conveying data between electronics in your project. It is the same.....

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container.

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-PH female 4-pin connectors on each end. These types of JST cables are commonly found on small...

This simple board serves as an adapter between a JST PH-style 3-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

Let there be lights…that are linked to one another! When your build needs a legion of lumens, a JST extension (like this 300mm length.....

This simple board serves as an adapter between a JST PH-style 5-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible...

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 3 pin. These...

This 3-conductor, 10 cm (4") cable has 24 AWG wires and 3-pin female JST PH-type connectors (2mm pitch) on both ends...

Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one end, and...

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

This 3xAA battery holder with JST connector puts a nice finishing touch on your battery powered project...

This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.

This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...

2 pin JST-ZH cables for use with our Motor Connector Shims, in 50mm and 150mm lengths. These cables provide a tidy, solderless way of connecting a Motor...

This panel mount cable is great for making USB Host or (some) client connections with a panel-mount setup. On the small panel-mount side you get a USB C...

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...

This 3-conductor, 75 cm (30") cable has 24 AWG wires and a 3-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This is a 5-pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors. It's the same cable that comes with our SPS30...

These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type...

2 pin JST-ZH cables for use with our Motor Connector Shims, in 50mm and 150mm lengths. These cables provide a tidy, solderless way of connecting a Motor...

These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...

This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...