Search results for: 'jst 1.25mm connector'
1.25mm Pitch 2-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST
JST GH 1.25mm Pitch 6 Pin Cable - 100mm long
Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...
$1.95 AUD, inc GST
1.25mm Pitch 3-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch
Brand: Sparkfun
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the...
$4.80 AUD, inc GST
Breadboard to GHR-05V Cable - 5-Pin x 1.25mm Pitch
Brand: Sparkfun
This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the...
$3.15 AUD, inc GST
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.60 AUD, inc GST
1.25mm Pitch 7-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.50 AUD, inc GST
1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have...
$2.45 AUD, inc GST
4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...
$1.95 AUD, inc GST
Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry (Individually Packaged)
Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$2.50 AUD, inc GST
6-Pin Single-Ended Female JST SH-Style Cable 12cm
Brand: Pololu
This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$3.50 AUD, inc GST
Breakout for JST SH-Style Connector, 2-Pin Male Top-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$2.80 AUD, inc GST
Breakout for JST SH-Style Connector, 3-Pin Male Side-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 3-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$2.95 AUD, inc GST
Breakout for JST SH-Style Connector, 4-Pin Male Top-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$3.15 AUD, inc GST
Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (3-Pack, Untested)
Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST
Breakout for JST SH-Style Connector, 5-Pin Male Side-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 5-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$3.30 AUD, inc GST
JST SH-Style Cable, 2-Pin, Single-Ended Female, 30cm
Brand: Pololu
This 2-conductor, 30 cm (12") cable has 28 AWG wires and a 2-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...
$1.70 AUD, inc GST
Breakout for JST SH-Style Connector, 4-Pin Male Side-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$3.20 AUD, inc GST
Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.80 AUD, inc GST
Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (Individually Packaged)
Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$2.55 AUD, inc GST
JST SH Vertical 6-Pin Connector - SMD
Brand: Sparkfun
Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type.
$3.85 AUD, inc GST
JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible
Brand: Adafruit
If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...
$7.95 AUD, inc GST
JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic
Brand: Adafruit
This cable will make it super easy to use Adafruit's plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector...
$6.15 AUD, inc GST
Breakout for JST PH-Style Connector, 3-Pin Male Side-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 3-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.70 AUD, inc GST
JST-SH 4-pin Cable with Micro SMT Test Hooks - STEMMA QT / Qwiic
Brand: Adafruit
This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.
$5.70 AUD, inc GST
Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST
JST SH-Style Cable, 2-Pin, Female-Female, 10cm
Brand: Pololu
This 2-conductor, 10 cm (4") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...
$2.20 AUD, inc GST
Breakout for JST SH-Style Connector, 2-Pin Male Side-Entry (2-Pack)
Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$2.90 AUD, inc GST
JST SH Horizontal 6-Pin Connector - SMD
Brand: Sparkfun
Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below.
$1.60 AUD, inc GST
Breakout for JST PH-Style Connector, 5-Pin Male Side-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 5-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.95 AUD, inc GST
Similar matches
JST connector Kit (2.54mm)
Brand: DFRobot
This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).
$10.78 AUD, inc GST
JST PH 2-Pin Cable – Male Header 200mm
Brand: Adafruit
For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
$1.60 AUD, inc GST
JST 2-pin cable
Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST
JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit
Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$23.80 AUD, inc GST
2.5mm Pitch 4-pin Cable Matching Pair - JST XH compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.10 AUD, inc GST
JST connector Kit (2.0mm)
Brand: DFRobot
This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).
$9.97 AUD, inc GST
2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible
Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.90 AUD, inc GST
JST Right-Angle Connector - Through-Hole 2-Pin
Brand: Sparkfun
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.
$1.85 AUD, inc GST
2-Pin Female JST XH-Style Cable (15cm)
Brand: Pololu
This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.30 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.