Search results for: 'battery cover'
4 x AA Battery Holder with On/Off Switch
Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST
Battery Holder 4xAA with Cover and Switch
Brand: Sparkfun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST
6-AA Battery Holder
Brand: Pololu
Battery holder for six AA batteries.
$8.80 AUD, inc GST
4-AA Battery Holder
Brand: Pololu
Battery holder for four AA batteries.
$5.65 AUD, inc GST
Battery Holder 3xAA with Cover and Switch
Brand: Sparkfun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.90 AUD, inc GST
Battery Holder 2xAA with Cover and Switch
Brand: Sparkfun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.85 AUD, inc GST
3xAA Battery Holder
Brand: DFRobot
This battery holder is used to hold 3 zinc-manganese batteries (non-rechargeable) or 3 NiMH / NiCd batteries, which can change into a 4.5V battery pack from the...
$2.40 AUD, inc GST
6-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also...
$14.20 AUD, inc GST
3-AAA Battery Holder
Brand: Pololu
Battery holder for three AAA cells.
$4.75 AUD, inc GST
3-AA Battery Holder
Brand: Pololu
Battery holder for three AA cells.
$3.60 AUD, inc GST
4xAA battery holder (square with cover)
Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project.
$2.60 AUD, inc GST
4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.90 AUD, inc GST
3-AAA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for three AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$8.70 AUD, inc GST
2-AA Battery Holder
Brand: Pololu
Battery holder for two AA cells.
$5.20 AUD, inc GST
2-AAA Battery Holder
Brand: Pololu
Battery holder for two AAA cells.
$2.80 AUD, inc GST
Battery Holder - 2xAAA with Cover and Switch
Brand: Sparkfun
This 2xAAA battery holder puts a nice finishing touch on your battery-powered project. This holder features a sliding, removable cover as well as an ON/OFF switch...
$3.20 AUD, inc GST
Battery Holder 3xAA with Cover and Switch - JST Connector
Brand: Sparkfun
This 3xAA battery holder with JST connector puts a nice finishing touch on your battery powered project...
$5.10 AUD, inc GST
Battery Holder 2xAA with Cover and Switch - JST-XH Connector
Brand: Sparkfun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.80 AUD, inc GST
3-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for three AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$9.60 AUD, inc GST
4-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$12.70 AUD, inc GST
4-AAA Battery Holder
Brand: Pololu
Battery holder for 4 AAA cells.
$4.25 AUD, inc GST
3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip
Brand: Adafruit
This battery holder connects 3 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is compact, and 3 AA's add...
$8.50 AUD, inc GST
Similar matches
9V Battery Clip
Brand: Core Electronics
Standard 9V Battery Clip with leads.
$0.46 AUD, inc GST
2-Way 18650 Battery Holder
This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, five 5V/2A output ports, five 3.3V/1A output ports and one...
$20.80 AUD, inc GST
18650 Battery Holder (Surface Mount Tabs)
Brand: Core Electronics
Cradle your 18650 batteries with these ABS holders
$1.85 AUD, inc GST
Seeed Studio Round Display for XIAO (1.28-inch)
Brand: Seeed Studio
Seeed Studio Round Display for XIAO is an expansion board compatible with all XIAO development boards. It features a fully covered touch screen on one side, designed as a 39mm disc. It contains an onboard RTC holder, charge chip, and TF card slot...
$39.70 AUD, inc GST
USB Charger Doctor - In-line Voltage and Current Meter (Blue)
Brand: Core Electronics
Oh no, what is going on with my USB device, it's getting HOT. Queue the USB Charger Doctor. Thanks to this little gadget you will be able to watch and care for your USB device or powered projects.
$2.80 AUD, inc GST
4-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for four AA cells arranged as two back-to-back two-cell holders.
$5.20 AUD, inc GST
AA Battery Holder
Brand: Core Electronics
Single AA Plastic battery holder.
$1.05 AUD, inc GST
Power Management HAT for Raspberry Pi
Brand: Waveshare
Power Management HAT for Raspberry Pi, with Embedded Arduino MCU and RTC...
$37.30 AUD, inc GST
9V Battery Holder
Brand: Sparkfun
This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure.
$7.35 AUD, inc GST
Thick Double-Sided Rectangle Foam Tape - 2 pieces - 3/4" x 1.5" x 0.063"
Brand: Adafruit
These 1mm thick double-sided foam tapes are perfect for a variety of small projects. These adhesive rectangles provide a strong bond to most surfaces and are cleaner and easier to remove without the wait, mess, or hassle of epoxy or hot glue
$1.50 AUD, inc GST
TV-B-Gone Kit - Universal v1.2
Brand: Adafruit
When Adafruit were putting together the TV-B-Gone kit, Adafruit started imagining a dystopian future, filled with televisions, where this kit would be super useful and we'd...
$38.25 AUD, inc GST
Sphero Mini Activity Kit
Brand: Sphero
The Sphero Mini Activity Kit has everything you need to get rolling and playing, including a clear Sphero Mini app-enabled robotic ball, a bumper cover to protect your Mini, 3 traffic cones, 6 bowling pins, a 28 piece construction set, and activity cards that help expand play time and imagination in STEM learning.
$174.95 AUD, inc GST
9V battery clip with 5.5mm/2.1mm plug
Brand: Adafruit
I found these high-quality battery clips. They're molded plastic so they wont tear like cheap clips, and they cover the battery terminals to prevent shorts. Comes...
$5.95 AUD, inc GST
AAA Battery Holder
Brand: Core Electronics
Single AAA Plastic battery holder. Supplied with fly leads.
$1.05 AUD, inc GST
Bee-Bot/Blue Bot - Replacement Battery
Brand: Bee-Bot
This is an aftermarket replacement battery for either the Bee-Bot or Blue-Bot Rechargeable Floor Robot
$66.65 AUD, inc GST
5V 10W Solar Panel - ETFE - Voltaic P110
Brand: Adafruit
These panels come to us from Voltaic Systems, makers of fine solar-powered bags and packs. These are waterproof, scratch-resistant, and UV resistant, and...
$164.95 AUD, inc GST
2-C Battery Holder
Brand: Pololu
Battery holder for two C cells.
$8.70 AUD, inc GST
4tronix Robo:Bit Mk3 Buggy for the BBC Micro:Bit
Brand: 4tronix
Robo:Bit Mk3 DIY Buggy for the BBC Micro:Bit. The Mk3 is very similar to Mk2 but with all the optional extras integrated (except Talon)
$84.80 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.