Search results for: 'aa battery holder'
4x AA Battery box (JST-PH, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$2.80 AUD, inc GST
3x AA Battery box (JST-PH, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.80 AUD, inc GST
2x AA Battery box (JST-PH, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.60 AUD, inc GST
4 x AA Battery Holder with On/Off Switch
Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST
6 x AA battery holder with 5.5mm/2.1mm plug
Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one...
$7.75 AUD, inc GST
3x AA Battery Box (micro-USB, Switch)
Brand: Core Electronics
Conveniently power up your Pico or micro:bit using their micro-USB input
$4.50 AUD, inc GST
AA Battery Holder
Brand: Core Electronics
Single AA Plastic battery holder.
$1.05 AUD, inc GST
8 x AA battery holder
Brand: Adafruit
When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12VDC output with...
$6.40 AUD, inc GST
4-AA Battery Holder
Brand: Pololu
Battery holder for four AA batteries.
$5.65 AUD, inc GST
6-AA Battery Holder
Brand: Pololu
Battery holder for six AA batteries.
$8.80 AUD, inc GST
3-AA Battery Holder
Brand: Pololu
Battery holder for three AA cells.
$3.60 AUD, inc GST
4 x AA Battery Holder with Premium Jumper Header Wires
Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$7.50 AUD, inc GST
4-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for four AA cells arranged as two back-to-back two-cell holders.
$5.20 AUD, inc GST
4xAA battery holder (square)
Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.
$1.95 AUD, inc GST
Battery Holder 4xAA with Cover and Switch
Brand: Sparkfun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST
2 x AA Battery Holder with Premium Jumper Header Wires
Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$4.15 AUD, inc GST
8-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for eight AA cells arranged as two back-to-back four-cell holders.
$7.60 AUD, inc GST
Battery Holder 3xAA with Cover and Switch
Brand: Sparkfun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.90 AUD, inc GST
Battery Holder 2xAA with Cover and Switch
Brand: Sparkfun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.85 AUD, inc GST
3xAA Battery Holder
Brand: DFRobot
This battery holder is used to hold 3 zinc-manganese batteries (non-rechargeable) or 3 NiMH / NiCd batteries, which can change into a 4.5V battery pack from the...
$2.40 AUD, inc GST
Battery Holder - 2xAA (JST-PH)
Brand: Sparkfun
This is a two-cell AA battery holder with 6" (~150mm) cable that has been terminated with a JST-PH connector.
$3.10 AUD, inc GST
MicroUSB Battery Holder (3xAA)
Brand: DFRobot
This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery holder via MicroUSB interface directly.
$2.85 AUD, inc GST
2-AA Battery Holder
Brand: Pololu
Battery holder for two AA cells.
$5.20 AUD, inc GST
4 x AA Battery Holder with 2.1mm Plug
Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.90 AUD, inc GST
4-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$12.70 AUD, inc GST
6-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also...
$14.20 AUD, inc GST
8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one...
$16.90 AUD, inc GST
2 x AA Battery Holder with On/Off Switch & JST PH Connector
Brand: Adafruit
This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...
$5.50 AUD, inc GST
4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.90 AUD, inc GST
4xAA battery holder (square with cover)
Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project.
$2.60 AUD, inc GST
3 x AA Battery Cage with Lead and 2.1mm DC jack
Brand: Kitronik
A 3xAA Battery Holder with a built-in lead that terminates in a 2.1mm DC jack, the lead and jack combined is approx. 150mm in length...
$4.90 AUD, inc GST
Battery Holder - 4xAA to Barrel Jack Connector
Brand: Sparkfun
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
$5.40 AUD, inc GST
Waterproof 3xAA Battery Holder with On/Off Switch
Brand: Adafruit
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$11.40 AUD, inc GST
Rechargeable NiMH AA Battery: 1.2 V, 2200 mAh, 1 cell
Brand: Pololu
This is a generic rechargeable AA NiMH battery with a capacity of 2200 mAh. These batteries are well-suited for powering small- to medium-sized robots and can be used with Pololu's AA battery holders. You will need to charge these batteries before you first use them.
$9.65 AUD, inc GST
3 x AA Battery Holder with 2.1mm Plug
Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for three (3) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.70 AUD, inc GST
3-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for three AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$9.60 AUD, inc GST
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. Behold! A holder for four (4) AA batteries! It's got a 5" long power cable with a 5.5/2.1mm...
$10.40 AUD, inc GST
3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip
Brand: Adafruit
This battery holder connects 3 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is compact, and 3 AA's add...
$8.50 AUD, inc GST
5 x AA Battery Holder with 2.1mm DC Jack
Brand: Adafruit
Here's yet another addition to Adafruit's family of AA battery holders. It's a holder for five (5) AA batteries, with 5" wire leads. It's black and has a 2.1mm barrel plug...
$8.95 AUD, inc GST
6-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for six AA cells arranged as two back-to-back three-cell holders.
$9.65 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.