Search results for: 'audio jacks'

Low profile 3.5mm stereo audio jack.

This is a 3.5mm TRRS SMD audio jack. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “tip, ring, ring, sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players).

This is the kind of ¼" stereo jack you might find in home stereos and PA systems. Switched contacts allow you to detect whether or not there is something plugged in to the jack. The jack can be panel mounted in an 11mm diameter hole.

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block audio connectors...

A 7inch display that comes with a case is a sturdy interface for a portable microcomputer setup

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block RCA connectors so...

This cable is easy to understand - you get a 3.5mm mono audio jack on one end, and two alligator clips on the other. It's also really easy to use, perfect for clipping...

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels...

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block audio connectors...

RCAs are some of Adafruit's favorite plugs. Easy to use and easy to handle, and still very popular on stereo equipment due to their universal nature. This dual/stereo RCA...

Upgrade your Raspberry Pi 5 Audio Experience - powered by Texas Instruments PCM5122

The ESP32-S3 Round Display Dev Board. A powerful, all-in-one platform with a 1.85" capacitive touchscreen, AI voice functions, and Qi charging for...

Gravity: I2C Voice Recorder Module EDU is DFRobot all-in-one voice interaction module, which integrates recording and playback functions into one. And...

7" Touch Display Kit for Raspberry Pi Zero, with IPS display Expansion Board, 1024×600, 5-point Capacitive Touch...

The Fly Wireless headphone adapter lets you use your favourite wireless headphones or earbuds in places that only have a headphone jack, like airplanes...

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!

PYNQ-Z2 is a FPGA development board based on ZYNQ XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers...

SIM7600G, a 4G CAT1 and GNSS positioning module, supports LTE-FDD, LTE-TDD, WCDMA, GSM, and can be used with Raspberry Pi and LattePanda SBCs for data,...

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players). This breakout board makes it easy to add a TRRS jack to your prototype or project by breaking out each conductor to a standard 0.1" spaced header.

8inch Capacitive Touch Display, Wide Color Gamut, 1280×800, Optical Bonding Toughened Glass Panel, HDMI/Type-C Display Interface, 10-Point Touch, Aluminum...

SIM7600G-H M.2 4G HAT For Raspberry Pi, LTE CAT4 High Speed, Global Coverage Multi Band, 4G/3G/2G Compatible, GNSS...

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this 3.5mm Stereo Round Panel...

The Spectrum Shield enables your Arduino with the capability of splitting a stereo audio input into 7-bands per channel. You can then read the amplitude of each channel using the ADC on your Arduino allowing you to control everything from LEDs to motors, pumps to relays, or even fire, all with sound. With this shield you will be able to have almost any project be able to react to music or sound!

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.

Plug&Play Far-field microphone array for your application! Not a bare dev board, but an out-of-the-box device...

Introducing the Arduino GIGA R1 WiFi, a high-performance DIY electronics board designed for gaming, art, and tech projects. Featuring a dual-core microcontroller, wireless connectivity, multiple ports, and expanded GPIOs with higher voltage support. Level up your creations with this versatile and powerful board!

Argon ONE V3 Case is now made compatible for Raspberry Pi 5 with upgraded features and all new black finish. Better Active Cooling with the blower...

The Cytron Maker Pi Pico Base is an all-in-one accessory for the Raspberry Pi Pico, offering a feature-rich learning environment for beginners and beyond!...

Ameba RTL8722DM Mini Board (AMB 23) is a devkit for a different family of WiFi/BLE-integrated chipsets from RealTek. As more chip companies come out with...

Protect your Arduino Giga R1 WiFi with KKSB's transparent enclosure featuring full port access, integrated ventilation, and shield compatibility, designed for both development and permanent project installations.

13.3inch Capacitive Touch Screen LCD V2, with Case and Toughened Glass Cover, 1920×1080, HDMI, IPS, Various Devices & Systems Support...

8inch Capacitive Touch Display, 8inch Monitor, 768×1024, Toughened Glass Panel, HDMI Interface, IPS Panel, 10-Point Touch...

ODYSSEY - X86J4125864 v2 features Quad-core Intel® Celeron® J4125 and RP2040 co-processor, equipping dual 2.5GbE interfaces and mulitple wireless...

Simplifying Raspberry Pi Pico for Beginners Maker Pi Pico incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all...

This beginner-friendly micro:bit kit is specially designed to encourage kids to explore STEAM/STEM and to learn to code. You can easily program EDU:BIT using the Microsoft MakeCode Editor. Just add te EDU:BIT MakeCode Extension and you’re good to go. If you’re a beginner, you can start with the block programming mode; simply drag, drop and snap the coding blocks together. For more advanced users, you can easily switch into JavaScript or Python mode on the MakeCode Editor.