Search results for: &#039;arduino battery pack&#039;

Conveniently power your projects with this sleek, quality battery box!

$1.80 AUD, inc GST

500mAh Lithium-Ion battery with an inboard NTC.

$6.70 AUD, inc GST

2 x 18650 Battery Holder with DC2.1 Power Jack

The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...

$3.40 AUD, inc GST

3 x 18650 Battery Holder with DC2.1 Power Jack

The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...

$4.40 AUD, inc GST

8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch

Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one...

$16.90 AUD, inc GST

3x AA Battery Box (micro-USB, Switch)

Conveniently power up your Pico or micro:bit using their micro-USB input

$4.50 AUD, inc GST

9V battery holder with switch & 5.5mm/2.1mm plug

This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...

$8.75 AUD, inc GST

4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)

This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...

$3.83 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...

$5.40 AUD, inc GST

3-AAA Battery Holder, Enclosed with Switch

Enclosed battery holder for three AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.

$8.70 AUD, inc GST

The nested form-factor of this 12V battery allows it to be tucked away in an 1120 Series U-Channel to protect it from the moving pieces of your chassis.

NiMH Battery (12V, 3000mAh, XT30 Connector [MH-FC], 20A Fuse, 12-20)

Brand: goBILDA

$124.95 AUD, inc GST

2-AAA Battery Holder

Battery holder for two AAA cells.

$2.80 AUD, inc GST

4 x AA Battery Holder with 2.1mm Plug

Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...

$6.90 AUD, inc GST

5 x AA Battery Holder with 2.1mm DC Jack

Here's yet another addition to Adafruit's family of AA battery holders. It's a holder for five (5) AA batteries, with 5" wire leads. It's black and has a 2.1mm barrel plug...

$8.95 AUD, inc GST

4-AA Battery Holder, Enclosed with Switch

Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.

$12.70 AUD, inc GST

3-AAA Battery Holder

Battery holder for three AAA cells.

$4.75 AUD, inc GST

2 x AA Battery Holder with On/Off Switch & JST PH Connector

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...

$5.50 AUD, inc GST

MicroUSB Battery Holder (3xAA)

This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery holder via MicroUSB interface directly.

$2.90 AUD, inc GST

2 x AA Open Battery Holder with JST PH Connector

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...

$4.05 AUD, inc GST

Out of stock

6xAA Battery Holder with DC2.1 Power Jack

This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.

$4.39 AUD, inc GST

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.

Battery Holder - 4xAA to Barrel Jack Connector

Brand: SparkFun

$5.40 AUD, inc GST

Adafruit PowerBoost 500 Shield - Rechargeable 5V Power Shield

What's a project if it's trapped on your desk? Now you can take your Arduino anywhere you wish with the PowerBoost shield! This stackable shield goes onto your Arduino...

$35.85 AUD, inc GST

Out of stock

4x AA Battery box (JST-PH, Switch)

Conveniently power your projects with this sleek, quality battery box!

$2.80 AUD, inc GST

2x AA Battery box (JST-PH, Switch)

Conveniently power your projects with this sleek, quality battery box!

$1.60 AUD, inc GST

3-pin LiPo Battery 1000mAh

1000mAh Lithium-Ion battery with an inboard NTC.

$8.50 AUD, inc GST

9V Battery

Duracell Coppertop 9V Batteries are perfect for stocking up and keeping your devices running. Ideal for use in projects powered by a 9V Battery Clip.

Please note you'll receive either A Duracell Coppertop or Duracell Industrial battery which have the same product specifications.

$6.35 AUD, inc GST

AA Battery

Power your next project with these energizer batteries. This is an alkaline 1.5 V - AA Battery

$1.55 AUD, inc GST

3-pin LiPo Battery 6000mAh

6000mAh Lithium-Ion battery with an inboard NTC.

$37.30 AUD, inc GST

4 x AA Battery Holder with On/Off Switch

Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...

$7.70 AUD, inc GST

4-AA Battery Holder

Battery holder for four AA batteries.

$5.65 AUD, inc GST

2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate...

$4.10 AUD, inc GST

4 x AA Battery Holder with Premium Jumper Header Wires

Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...

$7.50 AUD, inc GST

4-AA Battery Holder, Back-to-Back

Battery holder for four AA cells arranged as two back-to-back two-cell holders.

$5.20 AUD, inc GST

8-AA Battery Holder, Back-to-Back

Battery holder for eight AA cells arranged as two back-to-back four-cell holders.

$7.60 AUD, inc GST

3-pin LiPo Battery 10000mAh

10000mAh Lithium-Ion battery with an inboard NTC.

$63.40 AUD, inc GST

If your home or office consumes a lot of batteries, then grab yourself a 4 pack. The alkaline battery type is great to use on everyday household appliances such as remote controls, torches, toys, cameras, etc. 100% mercury and cadmium-free.

4x AAA Batteries

$2.84 AUD, inc GST

8 x AA battery holder

When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12VDC output with...

$6.40 AUD, inc GST

2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.

2xAAA Battery Holder with JST-PH Connector

Brand: Kitronik

$1.90 AUD, inc GST