Search results for: '40 pin'

50 results

Male Pin Header 2.54mm (1x40)

Brand: Core Electronics
Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!
$0.45 AUD, inc GST

Male Pin Header 2.54mm (2x20)

Brand: Core Electronics
Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!
$1.50 AUD, inc GST

40 Pin - Female Headers

Brand: Sparkfun
Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in the Olimex development boards. They mate very well with break away male headers.
$3.35 AUD, inc GST

10 Pcs 40 Pin Headers - Straight

Brand: DFRobot
This is 40 Pin 2.54 mm Single Row Pin Header Strip. It is great for our FIO and custom PCBs or general custom headers.
$4.80 AUD, inc GST

Header - 40-pin Male (Long Centered, PTH, 0.1")

Brand: Sparkfun
This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers.
$2.70 AUD, inc GST

2.54mm 1x40-Pin Right Male Header

Brand: Core Electronics

A classic 0.1" | 2.54mm pitch 40-pin header row, with right-angle mounting for the edge of your board.

$0.41 AUD, inc GST

40 Pin Break Away Male Header- Right Angle-10 Pcs

Brand: DFRobot
A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.
$4.80 AUD, inc GST

2.54mm 1x40-Pin Right Female Header

Brand: Core Electronics

This long row of headers has you covered when you have an "unconventional" free 40-pins on the edge of your PCB to interface or prototype with.

$1.05 AUD, inc GST

Raspberry Pi B - GPIO Ribbon Cable (40-pin, 150mm)

Brand: Sparkfun
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.
$9.15 AUD, inc GST

40-Pin 2.54mm Round Male Pin Header

Brand: Core Electronics

Great for low-profile designs or prototyping with DIP IC's.

$1.40 AUD, inc GST

40-Pin 2.54mm Round Female Pin Header

Brand: Core Electronics

Great for low-profile designs or prototyping with DIP IC's.

$0.54 AUD, inc GST

2mm Pitch 40-Pin Break-apart Male Headers - Pack of 5

Brand: Adafruit
Never get frustrated with 2mm-pitch modules again! Each one of these 40-pin break-apart header packs contains 5 pieces of 40-pin, 2mm pitch headers. Great for when...
$5.95 AUD, inc GST

40 Pin Break Away Male Header- Long Straight-10 Pcs

Brand: DFRobot
These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs.
$5.25 AUD, inc GST

40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long

Brand: Adafruit
Use this 25 cm long cable with our 40-pin FPC to 2x20 IDC Plug and Socket adapter PCBs to extend your Raspberry Pi's GPIO capabilities. Note you'll have to keep an eye on where Pin 1 is on the ribbon cable, on the adapter PCBs, and your HAT or Bonnet of choice.
$2.10 AUD, inc GST

GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3/ Pi 4 - (40 pins)

Brand: Adafruit
That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for...
$7.60 AUD, inc GST

40 Pin 0.5mm FPC, SMD, Both Sides

Brand: Sparkfun
This is a 40-pin surface mount FPC (Flat Printed Circuit) connector...
$0.87 AUD, inc GST

40pin GPIO Reference Board

Brand: Core Electronics
This slice of PCB is a one-to-one reference for the Raspberry Pi GPIO. If you're prototyping, this can save you a lot of hassle by helping prevent wiring problems. It's designed to slip over the GPIO header and give you a label right next to each pin.
$0.33 AUD, inc GST

40-pin TFT Friend - FPC Breakout with LED Backlight Driver

Brand: Adafruit
This breakout board is something Adafruit designed in-house to help Adafruit work with 'dot-clock' 40-pin TFT displays that require the RGB pixel data to be clocked in continuously...
$17.60 AUD, inc GST

Adafruit Multi-pitch FPC Adapter - 40 Pin 0.5/0.6/0.7/0.8/1.0mm

Brand: Adafruit
You will roll lucky 7's and connect to nearly any kind of FPC/flex cable with Ladyada's Super Lucky 40-pin FPC to breadboard adapter plate. You get 40 pads of 0.5mm...
$9.65 AUD, inc GST

7.0 40-pin TFT Display - 800x480 without Touchscreen

Brand: Adafruit
This 7.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly...
$61.40 AUD, inc GST

5.0 40-pin TFT Display - 800x480 with Touchscreen

Brand: Adafruit
This 5.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for...
$57.50 AUD, inc GST

40-pin ZIF socket

Brand: Adafruit
A ZIF (Zero Insertion Force Socket) allows you to insert and remove chips easily from an existing circuits. These are often used for chip programmers or when you...
$8.90 AUD, inc GST

10 Pcs 40 Pin Headers - Straight (Green)

Brand: DFRobot
This is a green colored 40 Pin 2.54 mm Single Row Pin Header Strip from DFRobot.These 0.1" header strips are commonly used as low-cost Arduino connectors.
$5.25 AUD, inc GST

10 Pcs 40 Pin Headers - Straight (Red)

Brand: DFRobot
This is a red colored 40 Pin 2.54 mm Single Row Pin Header Strip from DFRobot.These 0.1" header strips are commonly used as low-cost Arduino connectors.
$5.25 AUD, inc GST

10 Pcs 40 Pin Headers - Straight (Blue)

Brand: DFRobot
This is a blue colored 40 Pin 2.54 mm Single Row Pin Header Strip from DFRobot.These 0.1" header strips are commonly used as low-cost Arduino connectors.
$5.35 AUD, inc GST

40-pin FPC to Right Angle 2x20 IDC Female Socket Header

Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Female Socket Header Adapter
$7.10 AUD, inc GST

DIP 40 Pin ZIF Socket (Green), Test & Burn-in Socket

Brand: Waveshare
IC Test & Burn-in Socket, for DIP40 package...
$4.95 AUD, inc GST

IDC Breakout Helper - 2x20 (40 pin)

Brand: Adafruit
The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for Adafruit's popular GPIO Ribbon Cable for Raspberry...
$5.20 AUD, inc GST

5.0 40-pin 800x480 TFT Display without Touchscreen

Brand: Adafruit
This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly...
$52.10 AUD, inc GST

Raspberry Pi GPIO 40-Pin Ribbon Cable

Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST

40-pin Raspberry Pi GPIO Breakout

Brand: Core Electronics
If you're after a quick and easy to way to connect external circuitry up to your Raspberry Pi, then look no further! This breakout board has a form factor perfect for connecting to breadboards using the included 40-pin ribbon cable.
$5.65 AUD, inc GST

40-pin FPC Extension Board + 200mm Cable

Brand: Adafruit
Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board. This 40pin FPC extension board has two 40-pin flex connectors (both are bottom...
$9.10 AUD, inc GST

40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long

Brand: Adafruit
That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies
$8.10 AUD, inc GST

40-pin FPC to Straight 2x20 IDC Female Socket Header

Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Female Socket Header Adapter
$6.95 AUD, inc GST

RA8875 Driver Board for 40-pin TFT Touch Displays - 800x480 Max

Brand: Adafruit
Have you gazed longingly at large TFT displays - you know what I'm talking about here, 4", 5" or 7" TFTs with up to 800x480 pixels. Then you look at your Arduino...
$68.30 AUD, inc GST

40-pin 0.5mm FFC / FPC Extender

Brand: Adafruit
This 40-pin FFC / FPC Extender is very simple. It lets you connect two 40-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length.
$1.80 AUD, inc GST

40-pin FPC to Straight 2x20 IDC Male Plug Header

Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Male Plug Header Adapter
$6.20 AUD, inc GST

40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter

Brand: Adafruit
Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter.
$6.25 AUD, inc GST

micro:bit Edge Connector - SMD, Right Angle (40-pin)

Brand: Sparkfun
The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle...
$7.80 AUD, inc GST

HT0740 40V / 10A Switch Breakout

Brand: Pimoroni
Oh boy, this is a Big. Damn. Switch. Program it to switch loads up to 40V / 10A connected to the HT0740 breakout's sturdy screw terminals, and use up to...
$28.85 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.