Search results for: '3-aaa battery holder'
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH
Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST
3x AAA Battery box (Dupont, Switch)
Brand: Core Electronics
Conveniently power your projects with this sleek, quality battery box!
$1.70 AUD, inc GST
3-AAA Battery Holder
Brand: Pololu
Battery holder for three AAA cells.
$4.75 AUD, inc GST
3-AAA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for three AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$8.70 AUD, inc GST
3xAAA Battery Holder
Brand: DFRobot
A nice portable power pack can help you a lot when you build up you projects. Come and make one with this 3×AAA battery holder. This is a 3xAAA Battery Holder. It...
$2.40 AUD, inc GST
3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip
Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$7.60 AUD, inc GST
3x AAA Battery Holder with Switch - Tiny FX Compatible
Brand: Pimoroni
Power your Tiny FX projects with this 3x AAA battery holder featuring a built-in power switch, JST-SUR connector, and 3.3-4.5V output range for reliable portable power.
$6.30 AUD, inc GST
AAA Battery Holder
Brand: Core Electronics
Single AAA Plastic battery holder. Supplied with fly leads.
$1.05 AUD, inc GST
Tiny FX W - Wireless LED Effects Controller – Tiny FX W Starter Kit
Brand: Pimoroni
Add smart light and sound effects to models and dioramas with this small-but-mighty RP2040-powered programmable controller board - now with wireless...
$109.95 AUD, inc GST
Similar matches
2-Way 18650 Battery Holder
This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, five 5V/2A output ports, five 3.3V/1A output ports and one...
$20.80 AUD, inc GST
3 x 18650 Battery Holder with DC2.1 Power Jack
Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$4.35 AUD, inc GST
4-AA Battery Holder
Brand: Pololu
Battery holder for four AA batteries.
$5.65 AUD, inc GST
4 x AA Battery Holder with On/Off Switch
Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST
6 x AA battery holder with 5.5mm/2.1mm plug
Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one...
$7.75 AUD, inc GST
3x AA Battery Box (micro-USB, Switch)
Brand: Core Electronics
Conveniently power up your Pico or micro:bit using their micro-USB input
$4.50 AUD, inc GST
3-AA Battery Holder
Brand: Pololu
Battery holder for three AA cells.
$3.60 AUD, inc GST
8 x AA battery holder
Brand: Adafruit
When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12VDC output with...
$6.40 AUD, inc GST
6-AA Battery Holder
Brand: Pololu
Battery holder for six AA batteries.
$8.80 AUD, inc GST
Battery Holder 3xAA with Cover and Switch
Brand: Sparkfun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.90 AUD, inc GST
4-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for four AA cells arranged as two back-to-back two-cell holders.
$5.20 AUD, inc GST
Battery Holder 4xAA with Cover and Switch
Brand: Sparkfun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST
4xAA battery holder (square)
Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.
$1.95 AUD, inc GST
2xAAA Battery Holder with JST-PH Connector
Brand: Kitronik
2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.
$1.90 AUD, inc GST
2-AA Battery Holder
Brand: Pololu
Battery holder for two AA cells.
$5.20 AUD, inc GST
8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one...
$16.90 AUD, inc GST
4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.90 AUD, inc GST
4xAA battery holder (square with cover)
Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project.
$2.60 AUD, inc GST
4 x AA Battery Holder with Premium Jumper Header Wires
Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$7.50 AUD, inc GST
8-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for eight AA cells arranged as two back-to-back four-cell holders.
$7.60 AUD, inc GST
2 x AA Battery Holder with Premium Jumper Header Wires
Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$4.15 AUD, inc GST
9V Battery Holder
Brand: Sparkfun
This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure.
$7.35 AUD, inc GST
Battery Holder 2xAA with Cover and Switch
Brand: Sparkfun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.85 AUD, inc GST
2-AAA Battery Holder
Brand: Pololu
Battery holder for two AAA cells.
$2.80 AUD, inc GST
3xAA Battery Holder
Brand: DFRobot
This battery holder is used to hold 3 zinc-manganese batteries (non-rechargeable) or 3 NiMH / NiCd batteries, which can change into a 4.5V battery pack from the...
$2.40 AUD, inc GST
4-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$12.70 AUD, inc GST
6-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also...
$14.20 AUD, inc GST
2 x AAA Battery Holder with On/Off Switch & JST PH Connector
Brand: Adafruit
This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...
$4.65 AUD, inc GST
2 x AA Battery Holder with On/Off Switch & JST PH Connector
Brand: Adafruit
This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...
$5.50 AUD, inc GST
Waterproof 3xAA Battery Holder with On/Off Switch
Brand: Adafruit
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$11.40 AUD, inc GST
Battery Holder - 2xAA (JST-PH)
Brand: Sparkfun
This is a two-cell AA battery holder with 6" (~150mm) cable that has been terminated with a JST-PH connector.
$3.10 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.