Search results for: &#039;20-pin header&#039;

Male Pin Header 2.54mm (1x20)

Perfect for prototyping, these straight male headers are a super common header type so grab a few and put your ideas to the test!

$0.35 AUD, inc GST

Stackable 0.100″ Female Header: 2x20-pin, Straight

This stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+.

$7.90 AUD, inc GST

This adapter board allows you to use our range of Raspberry Pi boards with the Arduino Uno, Genuino UNO and other Arduino boards which use the same pin layout as the Uno design.

Arduino Uno to Raspberry Pi Adapter

Brand: AB Electronics

$9.50 AUD, inc GST

0.100" (2.54 mm) Female Header: 2x20-Pin, Straight

This connector is a double-row, 40-pin (2×20), straight female header strip designed to match 0.1" male headers.

$6.75 AUD, inc GST

Stackable Header Pins 2.54mm (1x20)

Perfect for prototyping, the stacking header lets your signal and power flow through your project, grab a few and put your ideas to the test!

$0.96 AUD, inc GST

The Raspberry Pi Pico is a fun and powerful development board, but the pin labels are printed in tiny letters on the bottom of the board. Since Where Labs...

Vertical Labelled Headers for Raspberry Pi Pico

Brand: The Pi Hut

$8.65 AUD, inc GST

This breakout board is a dual sided PCB with an SOIC 8 package on one side and a SOT23-6 package on the other. The SOIC and SOT23-6 pins are broken out to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.

SOIC to DIP Adapter 20 Pin

Brand: AB Electronics

$2.95 AUD, inc GST

The ClusterCTRL: Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi boards (not...

ClusterCTRL: Stack

Brand: The Pi Hut

$179.95 AUD, inc GST

Raspberry Pi Extra-Long Stacking Header (2x20 pins)

Need another HAT on top of the stack? Grab one of these stacking headers!

$1.95 AUD, inc GST

Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-pin, Straight

This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.

$11.10 AUD, inc GST

SSOP to DIP Adapter 28-Pin

8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We’ve made these 0.635mm devices fit just fine. Can be used with packages that have a lead span of .230" up to .350". Breaks out SSOP pins to standard .6" (600mil) and .3" (300mil) DIP width to be used in any DIP socket or bread board. The 8 and 16 boards have a 300mil spacing. The 20 and 28 pin boards have 600mil spacing between the DIP pins.

$8.80 AUD, inc GST

This MicroPython WBUS-DIP68 connector board can be used for all pyboard D variants and gives access to all power and IO pins. In addition to the pyboard, it can also carry up to four 20-pin mezzanine bus tiles.

MicroPython WBUS DIP68

Brand: Micropython

$24.40 AUD, inc GST

Raspberry Pi GPIO Tall Header - 2x20

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to...

$5.95 AUD, inc GST

VNH5019 Motor Driver Breakout

This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver.

$49.30 AUD, inc GST

ESP32-S2 Saola 1R Dev Kit featuring ESP32-S2 WROVER

ESP32-S2 Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Just about all of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2 Saola-1 on a breadboard - Adafruit recommend two breadboards 'side-by-side' since the Saola is a bit wide and you won't have extra holes on one side for wiring.

$32.05 AUD, inc GST

SparkFun Beginner Parts Kit

The SparkFun Beginner Parts Kit is a small container of parts frequently used by beginning (or even experienced) hobbyists that gives you all of the...

$40.45 AUD, inc GST

Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x20 Header

We put a PermaProto full-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...

$16.10 AUD, inc GST

Seeed Wio Terminal

Brand: Seeed Studio

Wio (Wireless input output) Terminal is more of a complete system equipped with Screen + Development Board + Input/Output Interface + Enclosure, making it an efficient and Product-Ready Product. Compatible with Arduino and MicroPython!

$71.90 AUD, inc GST

This compact STM32F411 development board can be well embedded in your projects. Featuring the STM32F411CEU6, this chip has 512KB of ROM, 128KB of SRAM and runs at...

STM32F411 BlackPill Development Board

Brand: DFRobot

$28.00 AUD, inc GST

Adafruit Multi-pitch FPC Adapter - 40 Pin 0.5/0.6/0.7/0.8/1.0mm

You will roll lucky 7's and connect to nearly any kind of FPC/flex cable with Ladyada's Super Lucky 40-pin FPC to breadboard adapter plate. You get 40 pads of 0.5mm...

$9.65 AUD, inc GST

The ESP32-P4-DevKit from Olimex is a development board with an Espressif ESP32-P4 Dual Core RISC-V processor. The board features a MACPHY Ethernet port,...

Olimex ESP32-P4-DevKit Development Board

Brand: The Pi Hut

$40.15 AUD, inc GST

MC33926 Motor Driver Carrier

This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to a DC motor. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.

$38.05 AUD, inc GST

52Pi Mini Screw Terminal GPIO Breakout Board for Raspberry Pi

Brand: 52Pi

Clamp wires straight onto every Raspberry Pi GPIO pin with clearly labelled screw terminals: no soldering, no loose jumpers.

$18.55 AUD, inc GST

Color Coded Header for Raspberry Pi

Here's a snazzy accessory for your Raspberry Pi Zero or Zero W, a color-coded 2x20 header! This Color Coded Header takes the mystery out of your Raspberry Pi's 2x20...

$3.95 AUD, inc GST

Simplifying Raspberry Pi Pico for Beginners Maker Pi Pico incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all...

Maker Pi Pico

Brand: Pimoroni

$35.05 AUD, inc GST

SparkFun GNSS Flex pHAT

The SparkFun GNSS Flex pHAT is a Raspberry Pi pHAT that functions as a carrier board for our SparkPNT GNSS Flex modules. With pre-soldered headers, no...

$44.30 AUD, inc GST

The IO Pi Plus is a 32 channel digital expansion board designed for use on the Raspberry Pi. The board is based around the MCP23017 16-bit I/O expander from Microchip Technology Inc. A pair of MCP23017 expanders are included on the board allowing you to connect up to 32 digital inputs or outputs to the Raspberry Pi. The IO Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the IO Pi Plus along with other expansion boards.

IO Pi Plus

Brand: AB Electronics

$28.60 AUD, inc GST

Robo Pico: Simplifying Robotics with Raspberry Pi Pico

A robotics base board for the Raspberry Pi Pico, packing a 2-channel DC motor driver, 4 servo ports, 7 Grove ports and a built-in LiPo charger - just plug in your Pico and start building.

$27.90 AUD, inc GST