Black PETG-HF with Spool (1kg)

SKU: CE10443 Brand: Bambu Lab

Engineered for outdoor brackets and mechanical stress, this high-flow PETG offers superior durability and speed.

$36.00 AUD, inc GST

$32.73 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 3rd of Feb

Quantity Discounts:

10+ $31.42 (exc GST)
25+ $30.44 (exc GST)

PETG (Polyethylene Terephthalate Glycol-modified) is used for its balance of impact resistance, ductility, and ease of printing. The "HF" designation indicates a High Flow formulation, specifically engineered to address the viscosity limitations of standard PETG. This allows the material to flow smoothly through the nozzle at the high acceleration and velocity rates typical of modern printers, minimising common issues such as under-extrusion or stringing during rapid travel moves.

Unlike PLA, PETG offers superior flexibility and durability, meaning parts are less likely to snap under mechanical stress. While it does not possess the extreme temperature resistance of ABS or ASA, it prints reliably on an open bed without the warping issues or toxic fumes associated with styrene-based plastics.

In industry, the base polymer is the standard for stretch-blow moulding watertight containers, such as soft drink bottles and food packaging. Consequently, this filament inherits excellent chemical and moisture resistance, making it the preferred choice for manufacturing water-resistant enclosures, gardening components, and workshop jigs that may be exposed to oils or solvents.

Core Features

Chemical & Weather Resistance: PETG-HF maintains structural integrity in environments where PLA would degrade. Its resistance to UV radiation, moisture, and mild acids makes it suitable for functional outdoor parts and water-involved applications.
Automatic Parameter Syncing (AMS): The spool features an embedded RFID tag that communicates directly with the Bambu Lab AMS. This automatically loads the correct colour, material type, and optimised thermal profile without manual configuration.
High-Speed Optimisation: Standard PETG often struggles above 100mm/s. This HF variant is formulated to support significantly higher volumetric flow rates, allowing you to utilise the full speed capabilities of X1 and P1 series printers without sacrificing layer adhesion.
Eco-Friendly Spool System: Refills are designed to fit onto a reusable Bambu Lab master spool. By eliminating the single-use plastic hub, you significantly reduce plastic waste and save a few dollars on material costs.
Moisture Management: PETG is hygroscopic and will absorb moisture from the air, which can cause stringing and popping. For critical engineering tolerances, we recommend drying the filament before long prints to ensure optimal surface finish and layer bonding.

Specifications

Property	Specification
Colour	Black
Format	Re-usable Bambu Lab Spool
Nozzle Temperature	230°C – 260°C
Bed Temperature	65°C – 80°C
Max Printing Speed	Up to 300 mm/s
Heat Deflection Temp	69°C (at 0.45 MPa)
Drying Settings	65°C for 8 hours
Cooling Fan	20% - 50% (Subject to overhangs)

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!