Argon EON - NAS Enclosure for Raspberry Pi 4

SKU: CE09338 Brand: Argon40 Guides (1)

Retired Product

Replaced by: Argon

This product has been replaced by: Argon
This product is no longer available. This page is only for reference.

The Argon EON case for the Raspberry Pi 4 (not included) allows you to build your very own 4-bay Raspberry Pi NAS!

This space-age-looking enclosure allows you to mount up to 4 SATA drives inside (two 3.5" drives and two 2.5" drives or four 2.5" drives).

Argon has made use of the same passive cooling techniques that are used in the NEO and ONE cases, and a 60mm fan is pre-mounted to cool the whole enclosure down in case it gets toasty!

The case includes a vast array of bonus features, the power button doubles as an OLED that can be used to display temperatures, the NAS's IP address, and many others. A real-time clock allows for accurate time to be kept in the event of a power outage and automating tasks such as restarting or getting data through APIs.

All of the IO is broken out on the back, Ethernet, 1x USB 3.0, 2x USB 2.0, Audio, 2x full-size HDMI and 12V power.

The microSD card and GPIO even have been routed out the back and is protected with a removable plate.

To power everything up a 12V 5A DC power brick is included in the package an IEC C13 Mains adapter cable is required and available separately.

Raspberry Pi and hard/solid-state drives are not included.

Features

4- BAY SATA Board:
- Compatible with 2.5” HDD or SSD (max 4 units);
- 3.5” HDD (max 2 units);
- Maximum recommended drive capacity: 10 TB
Multi-function power button and OLED display
Active cooling via built-in 60mm system fan
Passive cooling via aluminium body
2 full-size HDMI Out
Rear access to 40-PIN GPIO
Rear access to SD Card slot
Built-in Real Time Clock
Internal USB-Hub Access for NVMe Expansion Drive
Internal access for custom add-on Display

Resources

Instruction manual

Package Contents

1x Argon EON case
1x Screwdriver
1x Power brick

An AU C13 power cable is not included.

Raspberry Pi and SSD/HDD are not included.

Specifications

Power requirement: 12V 5A, 60 Watts
Material: Cast aluminium and Extruded aluminium
Dimensions: 145mm x 164.5mm x 210mm

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!