5M RGB LED Strip - APA102c 30 Per Meter - Black Strip - Weatherproof

SKU: CE05983 Brand: Core Electronics Guides (1)
This is a roll of addressable (APA102c RGB LEDs. Each LED has a built-in controller chip which allows you to daisy-chain the LEDs and control them individually with a super fast refresh rate!
$109.95 AUD, inc GST
$99.95 AUD, exc GST

Available with a lead time
Expect dispatch between Dec 30 and Jan 03

Quantity Discounts:

  • 5-10 $95.95 (exc GST)
  • 10+ $92.95 (exc GST)
- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This 5-metre roll has 30 LEDs per metre on a black coloured strip.

This is a roll of addressable (APA102c) RGB LEDs. Each LED has a built-in controller chip which allows you to daisy-chain the LEDs and control them individually! This is the same chip type that is used in DotStar LED strips. These strips have two control wires, Data and Clock. This means that you need two pins to control every strip. Having the Clock line allows this strip to be controlled by a wide range of devices without the need for machine timing (including the Raspberry Pi!). The LEDs on this strip operate at a very high refresh and PWM rate! You can send data at up to 32MHz to the pixels, and the high PWM rate makes these perfect for POV applications. These LEDs have a 20Khz PWM rate, compared to WS2812s (NeoPixels) 400Hz! The constant-current driver in each LED ensures that colour remains consistent, even if supply-voltage varies slightly from the optimal 5V. The LEDs are factory-calibrated to ensure you have consistent colours all the way along your strip.
The strip is weather-sealed in a flexible plastic jacket (easily removed, if desired) and terminated at each end with a 4-pin plug, and two additional power leads if high current is required.

Long strips can require a lot of current! Make sure you're using a power supply that is capable of running your project. We've listed the maximum current that these LEDs consume (full-brightness white) but for a typical, colourful display the current required is usually a lot lower. If you decide to go with a smaller power supply, experiment with the length of strip you need to find out its true current requirements. If you're unsure, we have a medium and high-current supply available.

Pinout

  • Red: 5V
  • Green: Data
  • Yellow: Clock
  • Black: Ground

Tech Specs

  • LED: APA102c
  • Supply voltage: 5V DC
  • Logic level: 5V
  • Max Current: 1.8A per meter
  • Current requirement: Approximately 60mA per LED when full white. (20mA for each color, R,G, B)

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

WLED Phone App | Control Addressable LEDs with an ESP32 or ESP8266

Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...
Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Addressable RGB LED Controllers

Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...
Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...

What Are DotStar LEDs (APA102/SK98225)?

So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...
So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...

Projects

Aircraft Lighting Model

The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...
The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...

HUGE LED Pixel Panel

I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...
I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...

Time lapsing in OctoPrint (Properly!)

Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.