12V 50Ah Lithium Iron Phosphate Battery (LiFePO4, M6)

SKU: ASL4566A Brand: Core Electronics
With all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries.
$554.95 AUD, inc GST
$504.50 AUD, exc GST

Quantity Discounts:

  • 3-5 $489.36 (exc GST)
  • 5+ $479.27 (exc GST)

Out of Stock

Sign up to get notified when it's available to order.

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This 12V 50Ah LiFePO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. LiFePO4 also provide more usable life per cycle, allowing for longer run times by holding a higher voltage until capacity is almost exhausted. These batteries will also maintain 80-90% charge when in storage - far higher than their lead acid counterparts. The latest generation in maintenance free batteries is here!

Each battery is fitted with an internal battery management system to provide safe charging and discharging at all times. This system provides internal short circuit, over temperature and under/over voltage cut off. Can be wired in series and/or parallel.

Factory supplied at 30% charge for safety compliance. Must be charged fully before use.


Excessive temperatures over 65ºC can effect the ABS housing. Need to be well ventilated in warm conditions. Not for use in engine bays.

Features

  • Internal battery management system for safe charging and discharging.
  • Drop in replacement for standard lead acid 50Ah batteries
  • Half the weight of traditional lead acid batteries.
  • Less discharge when in storage compared with traditional lead acid batteries.
  • Longer service life compared to lead acid.
  • Longer run time compared to lead acid.


What are LiFePO4 type batteries?

Check out our handy article explaining the benefits of using LiFePO4 batteries.


 Specifications

  • General
    • Dimensions: 229 x 138 x 213mm
    • Overall Weight: 7kg
    • Terminal Type: M6 bolt / F8
    • Connection: 12-48V max 4 in series, no limit in parallel.
    • Case Material: ABS
    • Case IP Rating: IP56
    • Cell Type: Cylinder
    • Certification: CB/CE, UN38.3, UL1642 @ cell.
    • Shipping Class: UN3480, Class 9
  • Battery Module Specification
    • Nominal Voltage: 12.8V @ 25°C, 0.2C
    • Capacity: 50Ah @ 25°C, 0.2C
  • Operating Parameters
    • Charging Voltage: 13.8 - 14.4V
    • Discharging Voltage: 11.8V (8.8 - 15V range)
    • Charging Current: 50A max, Recommended 25A
    • Max Constant Discharge: 50A
    • Pulse Discharge: 360A for 50mS
  • Temperature
    • Charge Range: 0 to 45°C
    • Discharge Range: -20 to 60°C
    • Storage Range: -20 to 45°C
  • Service Life
    • Design life: >10 years @ 25° C,0.2C
    • Cycle Life (25°C, 0.2C): >2000 times (100% DOD to 80% end)
    • Cycle Life (25°C, 0.5C): >4000 cycles (100% DOD to 50% end)
  • BMS Parameters
  • Charging
    • Cell Voltage Protection: 3.7V Delay 1-2S (Recover when discharge current >1A or cell voltage <3.38V or module voltage <13.52V)
    • Module Voltage Protection: 14.8V Delay 1-2S (Recover when discharge current >1A or cell voltage <3.38V or module voltage <13.52V)
    • Over Charging Current: 50A Delay 20-30S (Turn to pre-charge mode and try to recover in every 3 minutes)
    • Temperature protection: <-10°C or >70°C, Delay 1-2S (Recovery when >0°C or <60°C)
  • Discharging
    • Cell Voltage Protection: 2.1V Delay 500mS (Recover when charge current >1A or cell voltage >2.6V or module voltage >10.4V)
    • Module Voltage protection: 8.4V Delay 1-2S (Recover when charge current >1A or cell voltage >2.6V or module voltage >10.4V)
    • Over Discharging Current 1: 160-180A Delay 500-1500mS (Recover when charging current >1A, or recover in every 60S)
    • Over Discharging Current 2: 320-360A Delay 50-150mS (Recover when charging current >1A, or recover in every 60S)
    • Short Circuit: 150-700us
    • Temperature Protection: <-20°C or >75°C, Delay 1-2S (Recovery when >-10°C or <65°C)
  • BMS Features
    • PCB Temp Protection: >115°C Delay 1-2S Recover when <80°C
    • Cell Balance: 25-45mA passive balance cell voltage difference > 45mV
    • Temperature Accuracy: ±2°C Cycle measurement Measuring range -40 to 100°C
    • Voltage Accuracy: ±20mV Cycle measurement for cells and module
    • Current Accuracy: FSC±5% Cycle measurement measuring range -200 to +200
    • SOC: 5% (integral calculation)
    • Power Consumption: <300uA (switch off mode - storage), <100uA (sleep mode - protection & standby), <15mA (operating mode)

*Specifications are subject to change without notice.

 Warranty

We offer 5 years warranty on this product from its date of purchase. This is available from Altronics stores, online purchases or Altronics resellers. In accordance with our full warranty terms we will repair, replace or refund if goods you have purchased from us are defective.

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Powering Portable Projects: Batteries

Want to make your project portable? We've put together a quick guide to get you up to speed on batte...
Want to make your project portable? We've put together a quick guide to get you up to speed on batte...

Projects

Wireless QI Phone Charger Powered by Raspberry Pi

I have a new phone and want the battery health to last as long as possible. Charging it to 100% ove...
I have a new phone and want the battery health to last as long as possible. Charging it to 100% ove...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.