Ultimaker S5 Print Core CC 0.6mm

SKU: CE06323 Brand: Ultimaker
Enables printing with abrasive composite materials (i.e. a plastic filament reinforced with fibers, such as carbon, glass, ceramics, or metal)
$654.95 AUD, inc GST
$595.41 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 25th of Nov

Quantity Discounts:

  • 3-5 $577.55 (exc GST)
  • 5+ $565.64 (exc GST)
- +

1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Features

  • 0.6 mm diameter nozzle
  • Precision-machined brass nozzle with a wear-resistant ruby cone at its tip
  • Specially customized internal geometry prevents clogging
  • Features the same quick-swap design as other Ultimaker print cores for fast changeovers with no tooling and maximum uptime
  • Each print core CC Red 0.6 is packaged with four spare Ultimaker S5 nozzle covers for long-term use

Development

Design tested to print 10 kg of carbon fiber filament with no loss of print quality, and 1,000 plus hours of extrusion. (In comparison, a typical brass nozzle can print about 0.3 kg and hardened steel 3 kg of such material before print quality is reduced)

Performed over 1,000 heat cycles and 2,000,000 retractions in testing
Developed in collaboration with engineer and Ultimaker community member Anders Olsson

Other Info

Enables printing with abrasive composite materials (i.e. a plastic filament reinforced with fibers, such as carbon, glass, ceramics, or metal)

Preconfigured profiles for advanced composites from world-leading material companies are available via Ultimaker Cura, for a hassle-free 3D printing experience

The print core CC Red is compatible with the Ultimaker S5 and S7. (It is not compatible with the Ultimaker 3 because its feeder is not wear-resistant for printing with abrasive materials. If a user loads a Print Core CC onto an Ultimaker 3, a warning that it is not compatible with the printer will appear. Users can either adhere to the warning or ignore the warning and continue printing at their own risk)

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Make 3D Prints Look Like Gold - Gold Leaf and 3D Printed Components

Sometimes an electronic component will be so stunningly beautiful that you can't help but encase it...
Sometimes an electronic component will be so stunningly beautiful that you can't help but encase it...

3D Printable Charging Docks For 8BitDo Controllers

No gamer cave is complete without a retro gaming console and 8Bitdo Controllers are the best re...
No gamer cave is complete without a retro gaming console and 8Bitdo Controllers are the best re...

Make 3D Prints Look Like Chrome and Steel - Metallic Paints and Finishes For 3D Prints

Demonstrated here are two metallic finishes, that you can do to any 3D print, that will astound your...
Demonstrated here are two metallic finishes, that you can do to any 3D print, that will astound your...

3D Printing Better Print-in-Place Mechanisms

Print-in-Place mechanism is one of the special things about additive manufacturing that all other ma...
Print-in-Place mechanism is one of the special things about additive manufacturing that all other ma...

Projects

BuzzBox

Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...
Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...

Concrete Lamp

The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...

The Hipster Coaster

We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...
We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...

Educational Workshops

3D Printing (FFF) Workshop

Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.