Bambu Lab H2S - AMS Combo

The Bambu Lab H2S Combo combines a massive heated chamber/build volume, an accurate high-speed motion system, and an intelligent, actively dried material system to make complex, multi-filament manufacturing truly hands-off.

For makers and professionals who have outgrown standard desktop plates, the H2S Combo solves the two biggest hurdles in large-scale 3D printing: material degradation and the "single-material" limitation. By bundling the H2S with the AMS 2 Pro, you gain the ability to print massive parts while automatically switching between support materials, secondary colours, or backup spools. This isn't just about aesthetic multi-colour prints; it’s about functional manufacturing - using dedicated interface materials like PVA for "impossible" geometries that break away cleanly, leaving a perfect surface finish.

In the variable and always humid Australian climate, the AMS 2 Pro is a critical reliability upgrade rather than a luxury. Most multi-material systems fail when filament absorbs moisture, but the AMS 2 Pro features an integrated heating and venting system that actively dries your filament on demand. This means your PETG, Nylon, or ABS stays in peak condition.

AMS 2 Pro with Active 65°C Drying

Continuously dehumidifies and dries your filament during the print, ensuring engineering-grade materials like Nylon and PC remain moisture-free for flawless layer adhesion.

Intelligent Multi-Material Switching

Enables the use of up to 4 filaments (expandable to 16) in a single project, allowing for automated support material removal or seamless backup to prevent running out of filament mid-print.

340 x 320 x 340 mm Large Format Volume

Provides the space to print full-scale helmets, industrial housings, or production batches in one go, removing the frustration of splitting and gluing smaller parts.

Active 65°C Heated Chamber

Maintains a stable internal environment to prevent warping in large ABS or ASA parts, a common failure point for printers without dedicated thermal management.

Full-Path AI Sensor Suite

Monitors the entire filament journey from the AMS to the nozzle, automatically pausing for tangles, run-outs, or clogs to save your project and prevent wasted material.