UF0 - STM32F0 Cortex-M0, Arduino& Grove compatible Platform (Seeed Studio)

SKU: SS102990172 Brand: Seeed Studio

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

What is UF0?

UF0 is all-in-one arduino-compatible prototyping platform powered by ST STM32F051C8T6 Cortex-M0. It also integrates with Seeed Studio grove 4-pin interface, which can be connected with major grove families, making prototype easier and faster. The TSC capacitive touch controller is the u

nique character for you to have fun with your finger, easy to control the sensors with the touch panel but not programming  and it has 32bit timer and 12bit DAC,I2C, UART interfaces for extension.

Integrated with DC-DC Step-down power chip, it can provide highly efficient and stable power for the shields and other modules, especially suitable for those who want to build a product.

Arduino IDE for the software development, it makes your prototype start quickly. It supports Grove starter kit for Arduino from Seeedstudio perfectly .

 

     

    Features:

    Who’s UF0 For?

    UF0 is open source for everyone who ever played or want to try arduino,grove,ST Cortex-M0 chipset , for smart device and practical manufacturable product development . It is for makers , electronic Enthusiast,engineers ,softwares and designers
     

    Why We like it?

    • ARM-base 32-bit Cortex-M0 MCU with Low power consumption and high performance
    • Up to 8K RAM and 64K ROM
    • Capacitive touch sensor ,three Capacitive key in Android Style with more fun
    • 7-24V DC wide range input, high efficiency and powerful power supply to hook up stronger device
    • Arduino and Grove compatible with support for a rich set of third-party expansion boards
    • Dual UART and I2C (Grove Interface) for expansion boards

     

    Specification

    * Size L x W

    83.8 x 53.4mm

    * Processor

    ST STM32F051C8T6, 48MHz 32-bit ARM Cortex-M0 MCU

    * Memory

    8KB SRAM, 64KB Flash

    * Working Voltage

    3.3V

    * Input Voltage

    7V-24V

    * Output Voltage

    5V/2A 3.3V/500mA

    * Digital IO

    14个(6*PWM)

    * Analog Output

    6个(3.3V, 1 *DAC output)

    Documents

    Please visit the wiki page for more info about this product.If you have any technical problem, please contact support [at] bestni.com

    Discover More : we hope that you can discover more highlighs , discover and create more interest and practical prototype with groves ,arduino shields and others , you can post your technical issues and ideas on the forum ,we will discuss with you to build the dream.

     

    For any technical support or suggestion, please kindly go to ourforum.

     

    This product is listed in:

    Retired

    Product Comments

    Exact shipping can be calculated on the view cart page (no login required).

    Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

    We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

    • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
    • $6+ for Standard Post (typically 6+ business days, tracked)
    • $10+ for Express Post (typically 2+ business days, tracked)
    • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

    Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

    Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

    International Orders - the following rates are for New Zealand and will vary for other countries:

    • $11+ for Pack and Track (3+ days, tracked)
    • $16+ for Express International (2-5 days, tracked)

    If you order lots of gear, the postage amount will increase based on the weight of your order.

    Our physical address (here's a PDF which includes other key business details):

    Unit 18, 132 Garden Grove Parade
    Adamstown
    NSW, 2289
    Australia

    Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

    Have a product question? We're here to help!

    Write Your Own Review

    Guides

    The Maker Revolution

    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

    Projects

    Accurate IoT Clock With ESP8266

    Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
    Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...

    Days2Bin: Pico Powered Bin Reminder

    Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
    Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...

    Raspberry Pi Video Looper Display Installation | Overshare Video Festival

    IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
    IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
    Feedback

    Please continue if you would like to leave feedback for any of these topics:

    • Website features/issues
    • Content errors/improvements
    • Missing products/categories
    • Product assignments to categories
    • Search results relevance

    For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

    Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

    Makers love reviews as much as you do, please follow this link to review the products you have purchased.