Sipeed Longan Nano v1.1- RISC-V GD32VF103CBT6 Development Board

SKU: SS102991574 Brand: Seeed Studio

As an updated version to Sipeed Longan Nano, the Sipeed Longan Nano V1.1 development board has been modified the pin definitions of headers and board outline by us. Also, for looking tidy, we gifted it a new shell. The board is based on GD32VF103CBT6 MCU with the RISC-V 32-bit core of GigaDevice.

$21.50 AUD, inc GST

$19.55 AUD, exc GST

Quantity Discounts:

10+ $18.76 (exc GST)
25+ $18.18 (exc GST)

Out of Stock

Sipeed Longan Nano v1.1 is an updated development board based on the GD32VF103CBT6 MCU chip which has built-in 128KB Flash, 32KB SRAM. It is convenient for students, engineers, and geek enthusiasts to tinker with the new-generation RISC-V processors. GD32VF103CBT6 is a Bumblebee core, based on Nuclei System Technology supporting RV32IMAC instruction set and ECLIC fast interrupt function. Meanwhile, it costs only 1/3 of that of traditional Cortex-M3.

There can be multiple timer modules on the given device, e.g., four general-purpose 16-bit timers, two basic 16-bit timers, and one advanced 16-bit timer. More specifically, it has a watchdog timer to monitor the main program, an RTC(Real-time clock) to provide stable clock signals, and a SysTick(System tick timer) to maintain the main system working.

Longan Nano v1.1 development board has 28 GPIOs connected to the row pins which is so convenient that it can support connecting lots of devices. And it can be reset anytime by the Reset Button and the BOOT button. 160x80 RGB IPS LCD can be connected to its SPI screen interface. Also, it has an on-board 8M passive crystal oscillator, 32.768 kHz RTC low-speed crystal oscillator, TF Card Holder, 1 RGB LED, and uses a Type-C USB interface.

Longan Nano v1.1 supports multiple download methods, e.g., USB DFU download, UART ISP download, and JTAG download. By USB DFU download mode, you only need a USB Type-C cable to download the program to the development board. Longan Nano v1.1 supports the standard JTAG interface, which means it can debug online using the in-store RISC-V debugger or any JTAG-enabled debugger such as J-Link.

Furthermore, Sipeed has adapted the PlatformIO IDE for the Longan Nano development board, which can be visually developed on multiple platforms such as Windows/Linux:

https://github.com/sipeed/platform-gd32v

Features

Chip built-in 128KB Flash, 32KB SRAM
4 x general purpose 16-bit timer, 2 x basic 16-bit timer, 1 x advanced 16-bit timer
Watchdog, RTC, SysTick
3 x USART, 2 x I2C, 3 x SPI, 2 x I2S, 2 x CAN, 1 x USBFS (OTG)
2 x ADC (10 channel), 2 x DAC

Application

Robot
Smart Timer
Smart Meteorograph

Specifications

CPU:GD32VF103CBT6 based on RISC-V 32-bit core
Kernel power consumption: Only 1/3 of the traditional Cortex-M3
Storage: 128KB Flash, 32KB SRAM
Peripherals:

4 x general-purpose 16-bit timer
2 x basic 16-bit timer
1x advanced 16-bit timer
Watchdog
RTC
Systick
3x USART
2 x I2C
3 x SPI
2 x I2S
2 x CAN
1 x USBFS (OTG)
2 x ADC (10 channel)
2 x DAC

Button: 1 Reset Button and 1 BOOT button(Connected to GPIO)
Screen interface: SPI interface (160x80 RGB IPS LCD can be connected)
Storage interface: Onboard TF Card Holder
Debug interface: 2x4 pin leads out JTAG debugging interface and serial port
Crystal oscillator: 8MHz passive crystal oscillator + 32.768KHz RTC crystal oscillator
LED: Onboard 1 RGB LED
GPIO: 28 GPIOs have been connected to the row pins

Software Features

IDEPlatformIO IDE, Support debugging, Arduino
Compile Toolchain & DebuggerGCC, OpenOCD
Operating systemRT-Thread, LiteOS

Working Conditions

External power supply type-C: 5V±10% 0.5A
Temperature rise: <30K
Operating ambient temperature range:-10°C ~ 65°C

Part List

1 x Sipeed Longan Nano v1.1 Development Board
1 x 0.96inch 160x80 IPS RGB LCD

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!