Search results for: 'phat'

This diffuser will give your pHAT lovely bokeh!

A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once.

Mote pHAT lets you run Pimoroni's beautiful Mote lights straight from your Pi or Pi Zero, for a super-compact setup. Connect up to 4 Mote light strips, with Pimoroni's Mote cables, to the 4 channels provided and away you go! That's up to 64 pixels.

The SparkFun mosaic-X5 GNSS Flex pHAT is a development platform for the SparkFun GNSS Flex system. Designed to interface with a Raspberry Pi or comparable...

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry...

Achieve centimeter-level positioning with the next generation of high-precision GNSS using the SparkFun ZED-X20P GNSS Flex pHAT. This module features the...

The easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to three Pimoroni breakouts into the slots on Breakout Garden pHAT and get started coding and creating.

The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection...

The SparkFun GNSS Flex pHAT is a Raspberry Pi pHAT that functions as a carrier board for our SparkPNT GNSS Flex modules. With pre-soldered headers, no...

The SparkFun LG290P GNSS Flex pHAT is a development platform for the SparkFun GNSS Flex system. Designed to interface with a Raspberry Pi or comparable...

Equip your Raspberry Pi projects with meter-level, dual-band GNSS positioning using the SparkFun DAN-F10N GNSS Flex pHAT. This development platform...

Harness the power of Quectel's advanced GNSS technology with the SparkFun LG290P & IM19 GNSS Flex pHAT. This all-in-one module pairs the robust, quad-band...

Unlock centimeter-level positioning with full tilt compensation using the SparkFun ZED-X20P & IM19 GNSS Flex pHAT. This is one of our most advanced...

Now with SPI! The easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to three Pimoroni breakouts (2xI2C, 1xSPI) into the slots on Breakout Garden Mini and get started coding and creating.

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi!

Inky pHAT's beautiful 212x104 pixel, three-colour display is ideal for displaying simple graphics and crisply-rendered text and, because it's like paper, it's readable in bright sunlight.

AHOY, wanna spell out some LOVE with this COOL Raspberry Pi FOUR letter PHAT? Pimoroni's Four Letter pHAT has four 14-segment displays that you can use to display...

Fit a pHAT fiddle-free! These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy. Pogo-a-go-go!

An education-friendly mini HAT with handy USB to serial module designed to make it simple to get started with physical computing on Raspberry Pi. Features...

The SparkFun ZED-F9R GPS-RTK pHAT is a high-precision Automotive Dead Reckoning board with equally impressive configuration options...

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers form Pimoroni might be just what you need...

The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side...

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi!

Add a tiny yet convenient power switch to your Pi with Pimoroni's On-Off SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed...

The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables to help make I2C easier!...

Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!

The smallest Raspberry Pi just got a whole lot cooler. The Raspberry Pi Zero W carries the same form factor and specifications as the original Pi Zero and provides built-in WiFi and Bluetooth 4.1!

Monitor your world with Enviro for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. The perfect way to get started with citizen science and environmental monitoring!

The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you...

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

28 tiny RGB LED pixels in a single row that just slip right onto your Pi's pins, no soldering required! LED SHIM is ideal for status updates, notifications, a VU meter, or as a bar graph for sensor readings.

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible!

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence...

When rebooting a Raspberry Pi 4, the 3.3V rail is reset which causes problems for some HATs and projects. The 3v3 Sustain solves this problem! The board...

These standoffs are perfect for keeping your HATs off of your Raspberry Pi

Pimoroni's Pico HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It's a super-skinny 0.8mm PCB, so you can solder it right onto...

The Pimoroni Blinkt! is a “shield” for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make it ideal for adding visual notifications...

Design your own Bonnet or pHAT, attach custom circuitry and otherwise dress your Pi Zero with this jaunty prototyping Bonnet kit! To add to the Adafruit Bonnet party...

This is a basic, classic Pi Zero enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that...

The Lite-On LTP-305 LED matrices have quite a heritage! They were first developed in 1971 by Texas Instruments, but subsequently have been…