Pimoroni Tiny 2350 - RP2350 Mini Dev Board with 4MB Flash - PIM721

SKU: ADA6248 Brand: Adafruit

The Pimoroni Tiny 2350 - 4MB is a postage stamp-sized RP2350 development board with a USB-C connection perfect for portable projects, wearables, and...

$24.75 AUD, inc GST

$22.50 AUD, exc GST

Available with a lead time
Expect dispatch between Sep 22 and Sep 25

Quantity Discounts:

10+ $21.60 (exc GST)
25+ $20.93 (exc GST)

The Pimoroni Tiny 2350 - 4MB is a postage stamp-sized RP2350 development board with a USB-C connection perfect for portable projects, wearables, and embedding into stuff.

While the team at Pimoroni loves the Raspberry Pi Pico, they also wanted something smaller with a bunch more flash on board. Introducing the Tiny 2350 - a teeny tiny powerhouse with the chops to realize truly ambitious projects. It packs all the power of a dual-core Cortex M33 processor with 512KB of SRAM and 4MB of flash into a thumbnail-size PCB.

Programmable via USB-C, Tiny 2350 comes with 4MB of flash storage on board. The board is designed with castellated pads to allow it to be directly soldered onto a PCB (or you can attach headers to hook it up on a breadboard or connect things to it directly with wires). They've also managed to fit in a programmable RGB LED, a reset button, a Qw/ST (Qwiic/Stemma) connector for connecting up I2C devices, and some clever circuitry that lets you use the boot button as a user-controllable switch.

It's compatible with firmware built for the Raspberry Pi Pico 2 but offers a reduced number of pins due to its size. You can even run CircuitPython, Arduino IDE or MicroPython on it!

Technical Details

Getting Started

Features

Powered by RP2350A (Dual Arm Cortex M33 running at up to 150MHz with 520KB of SRAM)
4MB of QSPI flash supporting XiP
USB-C connector for power, programming, and data transfer
User controllable RGB LED
Qw/ST (Qwiic/STEMMA QT) connector for attaching breakouts
Twelve IO pins (including four 12-bit ADC channels)
Reset and BOOT buttons (the BOOT button can also be used as a user button)
On-board 3.3V regulator (max regulator current output 300mA)
Input voltage range 3V - 5.5V
Programmable with C/C++, CircuitPython or MicroPython
Dimensions: approx 22.9 x 18 x 5.8mm (L x W x H, including the USB-C port)

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!