Nylon Fabric Squares with Conductive Adhesive - 10cm x 10cm - 3 pack

SKU: ADA4762 Brand: Adafruit
These Conductive Nylon Squares go great with Adafruit's other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. Adafruit found that the metallic nylon fabric has some great improvements over plain copper tape.
$8.70 AUD, inc GST
$7.91 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow* Disclaimer:
For next-day delivery, the shipping address must be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost pickup timings and order verifications. eParcel Express is typically a 1-day service within the AusPost next-day network, though it is sometimes 2+ days.

Quantity Discounts:

  • 10+ $7.59 (exc GST)
  • 25+ $7.35 (exc GST)
- +

3 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

With Adafruit's fun assortment of conductive materials, cosplay and wearables have never been easier to craft! 

These Conductive Nylon Squares go great with Adafruit's other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. Adafruit found that the metallic nylon fabric has some great improvements over plain copper tape.

  • First of all, it doesn't crack when bent or twisted! So you can make all sorts of odd shapes and paths without worrying about broken traces. It's also more flexible so you can put it on a flexible material.
  • It comes with conductive glue on the opposite side, so you can tape it directly to create custom capacitive pads.
  • It's high conductivity, only a few ohms per foot. It's not quite as conductive as pure copper tape, but you can definitely power small components.
  • But, you cannot solder to it like you can with pure copper tape. You can sew it though, since its fabric.

Each order comes with three (3) 10cm x 10cm square stickers. They're the Goldilocks size for smaller wearables projects. Just cut out the size you need and save the rest.

We also carry these as rolls of fabric tape: 8mm wide x 10 meters long and 5mm wide x 10 meters long

This product is listed in:

Wearables>Materials

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

E-Textiles / Wearables Compared: LilyPad vs GEMMA vs Microbit

Every good E-Textiles or Wearables project needs to start somewhere, and the natural starting point ...
Every good E-Textiles or Wearables project needs to start somewhere, and the natural starting point ...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...

Arduino E-Paper Clock

This project started with a desire to have a modern digital clock that would use the natural light ...
This project started with a desire to have a modern digital clock that would use the natural light ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.