FNIRSI FAM-02 Handheld Anemometer (Wind Speed, Temperature & Humidity)
Put real numbers on airflow from vents, fans and outdoor breezes, with alarms that flag the moment conditions shift.
In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow*
Disclaimer:
For next-day delivery, the shipping address must
be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed
before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost
pickup timings and order verifications. eParcel Express is typically a 1-day service within the
AusPost next-day network, though it is sometimes 2+ days.
A pocket-sized airflow meter that puts wind speed, temperature and relative humidity on a single 2.0" colour screen. Point the eight-blade wind wheel into the breeze and all three readings update live, side by side.
Checking whether a duct, extractor fan or air-conditioning vent is actually moving air usually comes down to guesswork. The FAM-02 gives you real numbers instead. Set high and low wind thresholds and it will alert you the moment they're crossed, then log the event so you can review it later.
It's built for field use, with a 1500 mAh rechargeable battery good for 10–12 hours of continuous measuring, USB-C charging, and firmware updates by simply copying a file onto the meter over USB.
Features
- Monitor wind speed, temperature and humidity at the same time, with no switching between modes mid-measurement
- Picks up even light breezes, thanks to an upgraded eight-blade wind wheel spinning on a high-precision bearing
- Work in the units your job uses: m/s, km/h, ft/s, knots or mph
- Never miss a gust or a stall, with configurable high/low alarms via indicator light, buzzer and vibration
- Review what happened with an alarm log that stores the last 30 events, including time and type
- Spot trends as they happen on a live curve view refreshed every 0.5 seconds, and freeze any reading with HOLD
- Read it clearly indoors or out, with adjustable backlight brightness and dark or light display themes
- Stretch battery life with auto-sleep and timed shut-off at 30, 60 or 90 minutes
Specifications
| Property | Specification |
|---|---|
| Wind speed range | 0.0–30.0 m/s (0–108 km/h) |
| Wind speed resolution | 0.1 m/s |
| Wind speed units | m/s, km/h, ft/s, knots, mph |
| Temperature range | -20 to 60 °C |
| Temperature accuracy | ±1 °C (0–45 °C), ±2 °C (outside this range) |
| Humidity range | 0–99% RH |
| Humidity accuracy | ±5% RH (20–80% RH), ±6% RH (outside this range) |
| Display | 2.0" colour TFT, adjustable backlight, dark/light themes |
| Alarm outputs | Indicator light, buzzer, vibration |
| Alarm log | Up to 30 events |
| Battery | 1500 mAh rechargeable lithium |
| Runtime | 10–12 hours continuous |
| Charging | USB-C (5 V / 1 A) |
| Auto shut-off | 30 / 60 / 90 minutes |
| Menu languages | English, Chinese |
| Dimensions | ~63 × 28 × 193 mm |
| Weight | ~200 g |
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
40 Aruma Place
Cardiff
NSW, 2285
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
FNIRSI HT-P1A Mini Reflow Hot Plate (150W)SKU: CE11106 Brand: FNIRSIReflow and preheat small PCBs from below with precise, stable heat, powered b ...
- FNIRSI TDM-120P 2-in-1 Thermal Imager & True RMS MultimeterSKU: CE11105 Brand: FNIRSI
Spot the hot component, then probe it, without switching tools. Thermal imagi ...
- NVIDIA Jetson Orin Nano Super Developer KitSKU: DEV-22098 Brand: NvidiaThe NVIDIA® Jetson OrinTM Nano comprises of a Jetson Orin Nano 8GB module and a ...
- Carvera - Desktop CNC MachineSKU: CE10409 Brand: Makera
A compact desktop CNC with auto tool changer, probe and built-in dust extract ...
Videos
View AllGuides
Rigol DG1022 vs Siglent SDG1025 vs Siglent SDG1032X - Function Generator Shootout
The Maker Revolution
Our Rigol DP-832 Power Supply Review
Our Rigol DS1054Z Oscilloscope Review
Projects
Raspberry Pi Pico Long Range Radio (LoRa) Weather and Air Quality Station - Full Dashboard (DataCake + TTN), Rain-Proof and Long Range
DIY Weather Station with Raspberry Pi
Rain Gauge Data Logger
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments