Search results for: 'waterproof battery holder'

40 results

Waterproof 2xAA Battery Holder with On/Off Switch

Brand: Adafruit
Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$9.40 AUD, inc GST

Waterproof 3xAA Battery Holder with On/Off Switch

Brand: Adafruit
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The...
$11.40 AUD, inc GST

Kitronik Smart Greenhouse Kit for the BBC micro:bit

Brand: Kitronik
Unlock the secrets of nature with code, engineering, and the Kitronik Smart Greenhouse Kit for BBC micro:bit!
$93.60 AUD, inc GST

3x AA Battery Holder with On/Off Switch and 2-Pin JST

Brand: Adafruit
Here's another addition to the growing family of AA battery holders. Behold! A holder for three (3) AA batteries! It's got a 6" long genuine JST-PH 2-pin cable connector, an On/Off switch, and, oh yes, it's in classy Adafruit black.
$7.95 AUD, inc GST

3x AAA Battery Holder with Switch - Tiny FX Compatible

Brand: Pimoroni
Power your Tiny FX projects with this 3x AAA battery holder featuring a built-in power switch, JST-SUR connector, and 3.3-4.5V output range for reliable portable power.
$6.30 AUD, inc GST

2 x AA Battery Holder with Premium Jumper Header Wires

Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$4.15 AUD, inc GST

8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch

Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one...
$16.90 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH

Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST

2 x AAA Battery Holder with On/Off Switch & JST PH Connector

Brand: Adafruit
This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...
$4.65 AUD, inc GST

2 x 18650 Battery Holder with DC2.1 Power Jack

Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$3.40 AUD, inc GST

5 x AA Battery Holder with 2.1mm DC Jack

Brand: Adafruit
Here's yet another addition to Adafruit's family of AA battery holders. It's a holder for five (5) AA batteries, with 5" wire leads. It's black and has a 2.1mm barrel plug...
$8.95 AUD, inc GST

9V battery holder with switch & 5.5mm/2.1mm plug

Brand: Adafruit
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...
$8.75 AUD, inc GST

4 x AA Battery Holder with 2.1mm Plug

Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.90 AUD, inc GST

4 x AA Battery Holder with 2.1mm Plug and On/Off Switch

Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. Behold! A holder for four (4) AA batteries! It's got a 5" long power cable with a 5.5/2.1mm...
$10.40 AUD, inc GST

2 x AA Open Battery Holder with JST PH Connector

Brand: Adafruit
This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...
$4.05 AUD, inc GST

4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)

Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.83 AUD, inc GST

2xAAA Battery Holder with JST-PH Connector

Brand: Kitronik
2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.
$1.90 AUD, inc GST

3 x AA Battery Holder with 2.1mm Plug

Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for three (3) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.70 AUD, inc GST

2 x AA Battery Holder with On/Off Switch & JST PH Connector

Brand: Adafruit
This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...
$5.50 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip

Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$7.60 AUD, inc GST

6xAA Battery Holder with DC2.1 Power Jack

Brand: DFRobot
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
$4.39 AUD, inc GST

4 x AA Battery Holder with On/Off Switch

Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST

4 x AA Battery Holder with Premium Jumper Header Wires

Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$7.50 AUD, inc GST

6 x AA battery holder with 5.5mm/2.1mm plug

Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one...
$7.75 AUD, inc GST

Single CR2032 / 20mm Coin Cell Battery Holder with Switch

Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (also known as CR2032) in series to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes, so they are easy to get and fairly low cost. They tend to have about 220mAh capacity.
$2.10 AUD, inc GST

3 x 18650 Battery Holder with DC2.1 Power Jack

Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$4.40 AUD, inc GST

Single CR2032 Battery Holder with Three Flashing Modes

Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (CR2032 is the most popular size) to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes and other small topys, so they are easy to get and fairly low cost. And speaking of lights, these battery holder includes three "LED" modes: quick flashing, slower flickering, and static on. Press the button to cycle through the modes. Although designed for LED jewelry, it could be used for other projects that need simple cycling.
$3.05 AUD, inc GST

3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip

Brand: Adafruit
This battery holder connects 3 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is compact, and 3 AA's add...
$8.50 AUD, inc GST

Coin Cell Battery Holder - 2xCR2032 (Enclosed)

Brand: SparkFun
This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and kept closed via two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back.
$3.85 AUD, inc GST

Battery Holder - 2xAAA with Cover and Switch

Brand: SparkFun
This 2xAAA battery holder puts a nice finishing touch on your battery-powered project. This holder features a sliding, removable cover as well as an ON/OFF switch...
$3.20 AUD, inc GST

Battery Holder - 18650 (PTH)

Brand: SparkFun
This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in rechargable cell is needed. These little guys are low cost and easy to use!
$1.65 AUD, inc GST

18650 Battery Holder (Through Hole tabs)

Brand: Core Electronics
Gracefully hold 18650 batteries with these durable ABS holders.
$2.25 AUD, inc GST

AAA Battery Holder

Brand: Core Electronics
Single AAA Plastic battery holder. Supplied with fly leads.
$1.05 AUD, inc GST

Battery Holder 3xAA with Cover and Switch - JST Connector

Brand: SparkFun
This 3xAA battery holder with JST connector puts a nice finishing touch on your battery powered project...
$5.10 AUD, inc GST

4xAA battery holder (square with cover)

Brand: DFRobot
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project.
$2.49 AUD, inc GST

CR123A Li-ion Battery Holder(V1.0)

Brand: DFRobot
This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to...
$10.07 AUD, inc GST

3xAAA Battery Holder

Brand: DFRobot
A nice portable power pack can help you a lot when you build up you projects. Come and make one with this 3×AAA battery holder. This is a 3xAAA Battery Holder. It...
$2.57 AUD, inc GST

8 x AA battery holder

Brand: Adafruit
When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12VDC output with...
$6.40 AUD, inc GST

Battery Holder - 1x18650 (wire leads)

Brand: SparkFun
This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it.
$2.65 AUD, inc GST

MicroUSB Battery Holder (3xAA)

Brand: DFRobot
This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery holder via MicroUSB interface directly.
$2.90 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.